Bottles/Cages

HSF / AERIA hydration system is designed to seamlessly integrate with the Aeria Ultimate Stem (Stem is required for installation) - combined with the Aeria Ultimate aerobar, this system provides a fully integrated front end “super bike” solution for any bike. This BTA system features the race proven “no splash” fill port, a straw magnet mount for streamlined aero over the top of the system, a bite valve for fluid control and a removable computer mount. - Construction: BPA-Free, Foodsafe HDPE Bottle - Capacity: 30oz (857ml) - Only Compatible With: Profile Design Aeria Ultimate Stem (70mm or 100mm - ONLY) - Weight: 420g

The FC System was designed with one thing in mind: to bring together the most compelling details into one all-inclusive hydration system. - Streamlined Storage: New Profile Design FC Hydration Systems were designed with one thing in mind to create a clean front-end solution that thoughtfully integrates hydration, nutrition and electronic needs. Integrated storage streamlines nutrition needs into rear airfoil compartment. - Forward Computer Mount: Computer mount positions perfectly at the front of the system for optimal viewing. - Sealed cartridge bearings - No-Splash Refill Port: Brand new patent-pending refill port shields splash back. - Dual Straw Positioning: Strategically flexible to fit your preferences. A simple turn of the dial positions straw on the right or left side of the bottle. - Convertible Straw: Swap straw with gap cap to place straw in the front or rear of bottle. Specs - Construction: BPA-Free, Foodsafe HDPE Bottle - Capacity: 25oz (739ml) - Width: 65mm-140mm (center to center) - Weight: 250z (397g)

Zipp's SL Speed Carbon Bottle Cage features an ultra-light (18g) design engineered for flexibility and strength. Optimized for both side and direct bottle entry the SL Speed cage provides easy access to hydration, especially on smaller bike frames and those with tight angles. Thin-but-strong arms flex for easy bottle insertion and removal, at any angle.

Designed and engineered specifically for the Vuka BTA mount, the Zipp Vuka Carbon BTA bottle cage is constructed completely from UD carbon fiber, for low weight and strength, as well as super secure bottle fitment. It's engineered to virtually eliminate bottle launch.

- CFD refined integrated bottle with Bento box and computer mount - Articulated straw mount to allow precise angulation and unobtrusive fold-away - Forward computer mount with easy line-of-sight - Included Vision Drop Bottle System and Extension Mount - Metron TFE compatible with adaptor SIZES - 700ml FINISH - Matte black - Color graphics WEIGHT - 335 grams

The new S-Works Carbon Rib Cage III keeps the 100% FACT carbon fiber construction of yesteryear, but it ups bottle retention for super rough roads. The split design also provides pre-load to hold bottles securely, while making bottle entry as easy as possible. - FACT carbon construction creates a splendid fusion of strength, optimal bottle retention, and light overall weight. - Super-low bottle position improves the aerodynamic profile. - Tuned compression design provides secure bottle retention with easy in-and-out accessibility. - Weight: 24g

The 100% FACT carbon fiber S-Works Carbon Zee Cage II is compatible with SWAT solutions for tool and storage integration. It also features a unique left-side loading design that allows you to easily manage bottles when space on the frame is limited, or for when you're down in the drops. - SWAT design allows for storage and tool integration. - FACT carbon construction creates a splendid fusion of strength and light overall weight. - Side-load design for easy in-and-out accessibility for frames with compact bottle mounting area. - Leftt-hand loading on the down tube—right-hand loading on the seat tube. - Accepts EMT Cage Mount MTB Tool. - Accepts MTB XC Box (when used on compatible frames). - Weight: 28g

The 100% FACT carbon fiber S-Works Carbon Zee Cage II is compatible with SWAT solutions for tool and storage integration. It also features a unique right-side loading design that allows you to easily manage bottles when space on the frame is limited, or for when you're down in the drops. - SWAT design allows for storage and tool integration. - FACT carbon construction creates a splendid fusion of strength and light overall weight. - Side-load design for easy in-and-out accessibility for frames with compact bottle mounting area. - Right-hand loading on the down tube—left-hand loading on the seat tube. - Accepts EMT Cage Mount MTB Tool. - Accepts MTB XC Box (when used on compatible frames). - Weight: 28g

Wind-tunnel testing shows that a bicycle with XLAB's Aero TT Cage and Bottle System on it is 25% more aero than with a round bottle, meaning it will shave up to 20 seconds off a 40K bike leg or time trial. The high grip cage holds the bottle securely, and the non-slip surface with an easy-grip groove makes it easy for you to get the bottle out. The included XLAB 20-ounce aero bottle is BPA-free. - NEW! Stealth black bottle color. Match your black Torpedo Bottle or kit-match your bike! - Carbon cage securely grips bottle - Save up to 64 seconds on Full Race distance - 50% Less Drag than round bottles - Special XLAB Hi-Grip Deep Pocket carbon cage

XLAB's Gorilla XT Carbon Cage is perfect for mountain bikes, rear-mounted carriers and other high-stress hydration situations. The XT has over 4 times the gripping force of conventional carbon cages thanks to its 6 carbon gripping fingers, its top and bottom retention tabs and thicker carbon construction. And, it's still easy to slide your bottle out and grab a drink even when you're pushing it to the limit. It boasts an amazing 14-pound grip force on bottles.

Your water bottle is one of the most important pieces of equipment on your bike. Keep it stable with the carbon fiber Ritchey WCS Carbon Water Bottle Cage. This lightweight cage was designed by Tom Ritchey to perform on the roughest roads or the most gnarly mountain bike trails. - Carbon bottle cage shape designed by Tom Ritchey - Extra strong grip, perfect on the roughest or smoothest rides - Matte UD carbon with black or white logos - 32g

Made from Toray Japan T700 and T300 carbon fiber using a unique carbon flat lay-up process, the Shuttle Cage XE is an incredibly strong, ultralight, and affordable 3K carbon fiber bottle cage. With two stainless steel bolts included, it's ready to mount and enjoy on your ride. - Fits standard water bottle - Two stainless steel bolts included - Material: Torayca Japan T700 and T300 advanced carbon fiber - Size: 14 x 8.6 x 7.4cm / 5.5" x 3.4" x 2.9" - Weight: 22g / 0.78oz

- The Wolf Tooth Morse Cage is a lightweight and low profile way to reposition bottle cages. - Named for its dot-dash-dot-dash mounting pattern, the Morse Cage base plate offers four positions across 32mm of vertical adjustment, fully capturing one mounting bolt in every position to prevent movement. - Can be bent back into shape if damaged, and is available in both titanium and stainless steel

XLAB's Chimp Carbon Cage weighs only 36 grams and firmly holds your bottles in place, even over bumpy terrain thanks to 5 pounds of gripping force. It's specifically designed for use with tri bikes and other aero rigs with smaller front triangles that make grabbing bottles from ordinary cages difficult. The Chimp Cage's 30-degree cutoff lets you pull your bottles out at an angle for improved ease of use. Plus, this light carbon cage grips great and has supportive top and bottom tabs so you'll never lose a bottle.

XLAB's Gorilla Carbon Cage is one of the most popular rear bottle cages on the market! It boasts an amazing 7-pound grip force to keep bottles in place on bumpy roads and it's been specifically tweaked to work perfectly with saddle-mounted cage carriers. The Gorilla has over two times the gripping force of conventional carbon cages thanks to its 6 carbon gripping fingers, its top and bottom retention tabs and thicker carbon construction. And, it's still easy to slide your bottle out and grab a drink even when you're pushing it to the limit.

Low-cost dual carrier with NEW Italian-made cages. Featuring 60% more grip force with an 8lb bottle grip. Includes 2 saddle mounts & 2 Xenon cages. Does not include bag. - Dual bottle system tucks neatly behind your saddle for easy access to hydration - NEW upgraded Italian-made, Xenon cages increase cage grip force by 60% over original model - Mounts low to not hinder your ability to get on and off the bike - First-time rear hydration system buyer? Mounts with a single screw for no-fuss install so you can self-install and quickly get on the road Ideal for first-time rear hydration system buyers - Ergonomically designed so you can easily access the bottle even with limited flexibility - Adjust bottle height by up to 1" to perfectly position to your comfort level Worry-free bottle security - High-gripping Xenon cages tout an 8lbs grip force (approx) – within the ideal range of rear system grip force for worry-free bottle retention Easy storage upgrades readily available - Add an XLAB Mini Bag – a compact storage bag that sleekly mounts between the cages! - Mini Bag easily fits all the essentials for a clincher repair kit – 1 tube, XLAB Air Strike CO2 cartridges, patch kit, XLAB inflator and tire levers - Includes: 2 Mini Wing Cage mounting brackets and 2 XENON Cages - Color: Silver mounting brackets with black cages - Material: 6061-T6 Aluminum mounting brackets. Nylon composite cages. - Cage Grip Force: 8lbs (3.6 kg) approx - Weight: 186g - Warranty: 3 Year Limited Warranty

The HSF Aerodrink 880 follows in the footsteps of the Aerodrink with updated features. This Front-end hydration system easily mounts between aerobars so you don't have to deviate from the aero position to stay hydrated. - Flexible hose with bite valve - Flip cap for refill port - Secure mounting bracket and easy to remove bottle - Straw can be mounted in either the front or rear - Shape design to improve airflow onto the frame - Bottle Construction: BPA-Free, Food safe HDPE Bottle - Bottle Capacity: 30oz (880ml) - Compatibility: Aerodrink BTA bracket - BTA Construction: Injected nylon/glass fiber construction - Extension Width Requirement: 65mm - 140mm (center - center) - Weight: 289g (System), 130g (Bracket Only)

The TWIST bottle revolutionized the water bottle. Without the conventional bottle cage, this magnet-mechanical bike bottle system offers a new kind of freedom in handling and application. It is simply released from the bike with an easy “TWIST” movement and just as easily reattached by bringing together the magnetic holds, which include a mechanical locking system. If the bike has no thread inserts at all or if they are already blocked, the TWIST bottle 590 comes with the TWIST uni base. This universal frame adapter can be easily attached to any pipe with a width of 28 – 62 mm thanks to the long TPU zip ties. The smooth rubber back of the universal bike bottle holder protects your frame against scratches and helps to hold the uni base in place. Includes the TWIST uni base for attachment to any tube with re-closable zip ties. - 590 ml / 19.95 fl oz - Always BPA-Free & BPS-Free - Leak-proof, self-sealing bottle cap with high-flow valve - Includes removable dust cap - Includes removable connector - Includes TWIST Universal Bike Base for attaching to any tube - Compatible with all TWIST Bases - Bottle is dishwasher-safe without Connector - Proposition 65 Approved

Low-cost nylon composite mount with NEW Italian-made cage. Featuring 60% more grip force than original model! - Single bottle system neatly tucks one bottle behind your saddle for easy access to hydration - Perfect location for an extra bottle when taking on longer training rides or Century rides - Mounts low to not hinder your ability to get on and off the bike - Carry repair kit with XLAB Multi-Strike Repair Holder Ideal for first-time rear hydration system buyers - Ergonomically designed so you can easily access the bottle even with limited flexibility - Low mounting position provides enough clearance to easily swing your leg over the saddle - Adjust bottle height by up to 1" to perfectly position to your comfort level Worry-free bottle security - High-gripping XENON cages tout approx 8lbs (3.6 kg) cage grip force – within the ideal range of rear system grip force for worry-free bottle retention - Strong, sturdy mount prevents swaying, rattling and vibration Easy storage upgrades readily available - Add an XLAB Multi-Strike Repair Holder – a compact storage bracket that sleekly mounts behind the cage! - Multi-Strike Repair Holder easily carries a clincher repair kit – tube, tire levers, XLAB Air Strike CO2 Cartridges and XLAB inflator. It can also carry a full tubular setup including tubular tire and inflating foam sealant.

Torpedo innovation meets vertical bottle design. Brand new 28-ounce (828mL) hydration system with minimal frontal area. Includes composite mount and clamps, splash-proof lid over quick-fill opening, straw with bite valve, and Hydroblade bottle. All-in-one system for one great price! The Hydroblade is for casual mountain biking with front suspension forks. The most convenient, complete vertical hydration system available. - Safer riding - no reaching down for your bottle - Easily refuels. Simply lift lid and fill using wide mouth, quick-fill opening - Bite valve keeps straw full for quick drinking - Comes complete with easy clip-on clamps for triathlon and TT Bars - Mount the Hydroblade on MTB, fitness, drop or flat bars using the Hydroblade Universal Mount, available separately. - Fits widest range of bars – 80-160mm (center-to-center) Easy to Drink and Refill - Hands-free drinking. Simply sip from the straw, keeping your eyes on the road ahead. - NEW ClickCover! ClickCover designed with grippy pull-tab for opening. Simply pop open and refill via Split Cap. Insert bottle nozzle into aperture for fast, quick refill. - Comes with two cap styles! System also includes highly-acclaimed classic Torpedo Clear Cap. Wide mouth, quick-fill opening also makes mid-ride refill of tablets or powder a breeze. - Top-of-the-line bite valve decreases bloating by reducing air intake when sipping - Flat bottom allows bottle to stand upright on counter when filled Clean, Aerodynamic Design - Computational Fluid Dynamics (CFD) optimized aerodynamic shape to minimize system drag - Flow straighteners molded in for added drag reduction Highly-Acclaimed Megadjust Mounting - Securely adjusts to widest range of cockpit configurations 80mm-160mm (center-to-center) - Accommodates up to 20° of aerobar extension rotation SecureClip Brackets - Clips onto aerobar extensions for a clean bike aesthetic. Eliminates need for extra zip-ties, rubber bands or electrical tape to prevent rocking or tilting - Fits 22.2 diameter aerobar extensions

This rear-mounted hydration system holds two bottles and attaches directly in front of seatpost for easy hydration on the go. - Full angular adjustment allows bottles to be rotated - 6061-T6 aluminum construction - Brackets included to mount two Co2 cartridges - Fits 31.6mm to 27.2mm seatpost with shims (included) - Includes two cages and 6061-T6 Aluminum clamp and extension

This Zee Cage II was designed with an integrated EMT Cage Mount MTB Tool that has all of the trailside necessities required to get you out of a jam on your ride. For the cage itself, you'll find it to be respectably lightweight, and to have incredible holding power for when the trails get rough. For easy bottle access, we also gave it a unique side-loading design that allows you take pulls from the right or left-hand side depending on placement. - SWAT design allows for storage and tool integration. - Reinforced composite material improves durability without adding weight. - Includes EMT Cage Mount MTB Tool with 3, 4, 5, 6, 8mm, T25 Torx, and #1 flathead screwdriver. - Right-hand loading on the down tube—left-hand loading on the seat tube. - Sleek, minimalist design with razor-sharp graphics.

The small TWIST bottle 450 with an optimized easy squeeze thanks to a softer material and new bottle cap with a high flow, self-sealing and leak-proof valve and optional dirt cover. Kids bike or fully – paired with the innovative magnetic-mechanical mounting system there is no frame too small for this bottle. Includes the TWIST uni base for attachment to any tube with re-closable zip ties. - 450 ml / 15.22 fl oz - Always BPA-Free & BPS-Free - Leak-proof, self-sealing bottle cap with high-flow valve - Includes removable dust cap - Includes removable connector - Includes TWIST Universal Bike Base for attaching to any tube - Compatible with all TWIST Bases - Bottle is dishwasher-safe without Connector - Proposition 65 Approved

Discover the TWIST Bottle 450 kids + uni base: Perfect for pint-sized pedal enthusiasts with compact bikes that play hard-to-get with traditional bottle mounts! Why? Because this little powerhouse, armed with a magnetic-mechanical mounting system, plays nice even with the tiniest frames. And guess what? It comes with the TWIST Uni Base, a universal attachment wizard, ready to marry your bottle to any tube that's re-closable! - 450 ml / 15.22 fl oz - Always BPA-Free & BPS-Free - Perfect for kids bikes - Leak-proof, self-sealing bottle cap with high-flow valve - Includes removable dust cap - Includes removable connector - Includes TWIST Universal Bike Base for attaching to any tube - Compatible with all TWIST Bases - Bottle is dishwasher-safe without Connector - Proposition 65 Approved

Innovative design with side and bottle insertion/removal - Carbon injection bottle cage - Extremely light, 25 grams - Compatible with all frames, ideal for sloping tubes or small sizes

Vico is the first-choice carbon bottle cage used by the best World Tour teams. Feedback given by champions made it possible to design and manufacture this bottle cage, so it could meet all riders' needs. Many years of races and victories with the world's best professional teams have helped us design, test, and create a bottle cage that will meet the expectations of even the most demanding cyclists. - Injection bottle cage - Carbon fiber - Extremely light - Grips bottle firmly yet insertion/removal is very easy - Weight: 23g - Made in Italy

Elevate your adventure with the TWIST 590 Bottle + Bike Base. This sleek design uses strong magnetic force and mechanical latching to cagelessly secure bottle to bike. Our patented technology magnetically snaps your bottle in place and only releases when you give it a TWIST. Never lose a bottle on the trail again! Always BPA-Free & BPS-Free. Includes TWIST Bike Base and screws for mounting to standard braze-ons. Make sure to use the provided screws when attaching your bike base. - 590 ml / 19.95 fl oz - Always BPA-Free & BPS-Free - Leak-proof, self-sealing bottle cap with high-flow valve - Includes removable dust cap - Includes TWIST Bike Base and screws for mounting to standard braze-ons - Compatible with all TWIST Bases - Dishwasher-safe without Connector - Proposition 65 Approved

Elevate your adventure with the TWIST 750 Bottle + Bike Base. This sleek design uses strong magnetic force and mechanical latching to cagelessly secure bottle to bike. Our patented technology magnetically snaps your bottle in place and only releases when you give it a TWIST. Never lose a bottle on the trail again! Measures the same length as our TWIST 590 Bottle, with more than 25% greater capacity due to its larger width. Always BPA-Free & BPS-Free. Includes TWIST Bike Base and screws for mounting to standard braze-ons. Make sure to use the provided screws when attaching your bike base. - 750 ml / 25.36 fl oz - Same length as TWIST 590 Bottle but with about 24% greater capacity due to width. - Always BPA-Free & BPS-Free - Leak-proof, self-sealing bottle cap with high-flow valve - Includes removable dust cap - Includes TWIST Bike Base and screws for mounting to standard braze-ons - Compatible with all TWIST Bases - Dishwasher-safe without Connector - Proposition 65 Approved

Elevate your adventure with the TWIST 800 Bottle + Bike Base. This sleek design uses strong magnetic force and mechanical latching to cagelessly secure bottle to bike. Our patented technology magnetically snaps your bottle in place and only releases when you give it a TWIST. Never lose a bottle on the trail again! As our largest bottle, the 800 is perfect for larger frames or extra long rides. Always BPA-Free & BPS-Free. Includes TWIST Bike Base and screws for mounting to standard braze-ons. Make sure to use the provided screws when attaching your bike base. - 800 ml / 27.05 fl oz - Always BPA-Free & BPS-Free - Leak-proof, self-sealing bottle cap with high-flow valve - Includes removable dust cap - Includes TWIST Bike Base and screws for mounting to standard braze-ons - Compatible with all TWIST Bases - Dishwasher-safe without Connector - Proposition 65 Approved

Optimized for both side and direct bottle entry, Zipp's Alumina cage provides easy access to hydration, especially on smaller bike frames and those with tight angles. Thin-but-strong arms flex for easy bottle insertion and removal, at any angle. - 27 grams

Elevate your adventure with the TWIST 450 Bottle + Bike Base. This sleek design uses strong magnetic force and mechanical latching to cagelessly secure bottle to bike. Our patented technology magnetically snaps your bottle in place and only releases when you give it a TWIST. Never lose a bottle on the trail again! As our smallest bottle, the 450 is perfect for small frames or for those who like to ride light. Always BPA-Free & BPS-Free. Includes TWIST Bike Base and screws for mounting to standard braze-ons. Make sure to use the provided screws when attaching your bike base. - 450 ml / 15.22 fl oz - Always BPA-Free & BPS-Free - Leak-proof, self-sealing bottle cap with high-flow valve - Includes removable dust cap - Includes removable connector - Includes TWIST Bike Base and screws for mounting to standard braze-ons - Compatible with all TWIST Bases - Dishwasher-safe without Connector - Proposition 65 Approved

Discover the TWIST Kids Bottle 450: Perfect for pint-sized pedal enthusiasts with compact bikes that play hard-to-get with traditional bottle mounts! Why? Because this little powerhouse, armed with a magnetic-mechanical mounting system, plays nice even with the tiniest frames. Sometimes, smaller is not just better; it's brilliant. Especially when your bike's frame is a bit of a space miser and doesn't offer much real estate for a regular water bottle. Enter the TWIST Bottle 450 - your solution for those tight spots. With its space-saving 450 ml (15.22 fl oz) capacity, it's the ideal companion for kids' bikes. And let's not forget the vibrant bottle cap and kid-friendly design that's sure to bring smiles! Mounting the bike base onto your bike's bottle braze-ons is a breeze, requiring only two screws. If the bike does not come with bottle braze-ons, check out the TWIST Kids Bottle with Uni-Base. - 450 ml / 15.22 fl oz - Always BPA-Free & BPS-Free - Perfect for kids bikes - Leak-proof, self-sealing bottle cap with high-flow valve - Includes removable dust cap - Includes removable connector - Includes TWIST Bike Base and screws for mounting to standard braze-ons - Compatible with all TWIST Bases - Dishwasher-safe without Connector - Proposition 65 Approved

Elevate your adventure with the TWIST 600 Bottle + Bike Base. This sleek design uses strong magnetic force and mechanical latching to cagelessly secure bottle to bike. Our patented technology magnetically snaps your bottle in place and only releases when you give it a TWIST. Never lose a bottle on the trail again! Always BPA-Free & BPS-Free. Includes TWIST Bike Base and screws for mounting to standard braze-ons. Make sure to use the provided screws when attaching your bike base. - 600 ml / 20.5 fl oz - Always BPA-Free & BPS-Free - Leak-proof, self-sealing bottle cap with high-flow valve - Includes TWIST Bike Base and screws for mounting to standard braze-ons - Compatible with all TWIST Bases - Dishwasher-safe without Connector - Proposition 65 Approved

Aluminum BTA hydration mount compatible with Torpedo Versa (sold separately). Pre-drilled front mounting holes for Torpedo Versa or aero computer mounts. - Adjustment Width: 75-150mm - Construction (Plate): 6061-T6 Aluminum - Construction (Brackets): Nylon composite with Velcro straps coated with no-slip extension grip - Weight: 1.9oz (55g)

The Aero HC Bracket Kit from Profile Design lets you attach a water bottle and computer mount in between your aero extensions. It fits aero extensions from 85mm to 120mm wide so you can use the bars of your choosing.

Kit-match with a new customizable high-grip carbon cage! Customize Your Cage Colors - Personalize your look with Raptor Talons available in multiple colors - High-grip carbon cage with approx 6lbs grip force - Svelte design for a streamlined look - Weight: 1.0oz (30g) - Pair with the hyper-reflective Cool Shot insulated bottle Grip Force - Approx 6lbs grip force for excellent bottle retention Optimized Carbon - Unidirectional carbon inside and 3K carbon weave outside Ideal Uses - Road - Triathlon (Aerobar and Frame) - Gravel - Mountain - Weight: Approx 30g (1.07oz) - Grip: Approx 6lbs - Construction: Carbon Fiber - Includes: Corrosion resistant Black Zinc screws - Warranty: Limited 3 Year

Carrying enough water on longer rides can be a problem. This is especially true for touring cyclists in the southwest as well as parts of the world where potable water sources are far apart. We designed the Mojave cage to fit 32oz Nalgene bottles, 32 oz insulated Klean Kanteen bottles, and 40oz Klean Kanteen stainless steel bottles. The mounting tab has 5 holes to allow you to mount it in three positions, higher or lower as best fits your frame. You can also mount it on newer frames with three water bottle screw bosses. Construction is all stainless steel. One caveat, the Klean Kanteen bottle is pretty tall, about 29cm with the sport top. It may not fit inside the main triangle of smaller frames. The Nalgene is shorter, but doesn't offer a sport top. Weight is 158 gr. Available in Polished Silver and Smooth Noir.

Tough enough to tackle any ride, our Podium Steel is built for life on and off the road. Made from premium 18/8 stainless steel, this sleek bottle combines rugged durability with a streamlined design that's always close at hand but stays out of your way. The double-wall vacuum insulation keeps your beverages cold for your entire ride, and the lightweight construction and 18oz capacity strike the perfect balance between agility and reliability. The high-flow cap and innovative no-squeeze design helps you stay hydrated without missing a step. Plus, the leakproof lockout feature removes the risk of spills so you can focus on pushing past your limits. The optimized cage fit keeps your Podium Steel VSS 18oz securely in place, even during the most demanding rides. Plus, the BPA-free, easy-to-clean construction ensures a quick rinse is all you need before hitting the road. For riders who refuse to compromise, the Podium Steel VSS 18oz is a trusted companion on all your cycling adventures.

Designed with a built-in, discreet holder for an Apple AirTag*, the Matrix Air Cage is a revamped take on our popular Matrix Team Cage. Featuring the same minimalist, dual-side-loading design, it goes one step further by cleanly hiding the AirTag between the bottle cage and bike frame for an added level of security. It's also constructed from the same lightweight, incredibly durable Composite Matrix material and goes one step further with its IPX7 waterproof rating keeping the AirTag dry. By developing it to be virtually indistinguishable from a standard water bottle cage, the Matrix Air Cage is a perfect solution to hide an AirTag and utilize Apple's "FindMy" app to help locate a stolen or missing bicycle. And it's been verified to work with Apple's ultra-wideband signal. Lastly, it comes with a set of stainless steel TR25 security bolts, complete with an included tool bit. -Includes TR25 security bolts and tool. -Ultra-wideband tested. *Apple AirTag not included. *AirTag is a trademark of Apple Inc., registered in the U.S. and other countries and regions.

The SKS Anywhere Adapter with VeloCage Bottle Cage allows you to mount a bottle cage anywhere on your frame. Remove the bottle cage, and almost anything can be placed anywhere on your bike frame. Perfect for bikes that do not have water bottle cage mounts. The double-sided hook-and-loop straps are super strong and long enough to go around almost any frame tubing—cut straps to desired length after placement. Designed to mount water bottle cages, mini pump mounts, and other standard items, the straps can also be used to strap on jackets, bananas, energy bars, trail tools, fishing poles, and more. Cage is included in case that is your main purpose for the adapter.

The Wolf Tooth Morse Cage has its name because of the dots and dashes on the mounting plate that provide for up to 32mm of vertical placement adjustment. This allows the rider to change bottle cage position based on restrictions of frame size, frame bags, or mount placement. - Hand-bent hollow tubing - Fits any bike frame that has two standard bottle cage mounts with 64mm spacing - Easily bent back in to shape if damaged - Made by hand in Minnesota

QBP Purist Water Bottles - Rinse bottle with warm water and a mild detergent and alternatively, the bottle is dishwasher-safe on the top rack - Made for food-safe LDPE # 4 plastic - BPA-free and won't leach into liquid - Insulated bottle design - Volume: 23 oz

The Rib Cage II is not only a sleek, lightweight water bottle cage, but it's also been designed to be fast in the wind. Of course, it also performs its primary task of holding tight to bottles dutifully, so you won't be losing bottles when the road gets rough. - SWAT-compatible design allows for storage and tool integration. - Super-low bottle position improves the aerodynamic profile. - Tuned compression design provides a secure bottle retention with easy in-and-out accessibility. - Reinforced composite material improves durability without adding weight. - Sleek, minimalist design with razor-sharp graphics. - Accepts SWAT Cage Mount Road or MTB Tool. - Accepts MTB SWAT Box (when used on compatible frames). - Weight: 33g

The Zee Cage II has incredible holding power, and it's compatible with SWAT solutions for tool and storage integration. For easy bottle access, we also gave it a unique side-loading design that allows you take pulls from the right-hand side. - SWAT-compatible design allows for storage and tool integration. - Reinforced composite material improves durability without adding weight. - Side-loading design allows for secure bottle retention with easy in-and-out accessibility for frames with a compact bottle mounting area. - Left-hand loading on the down tube—right-hand loading on the seat tube. - Sleek, minimalist design with razor-sharp graphics. - Accepts SWAT Cage Mount MTB Tool. - Accepts MTB SWAT Box (when used on compatible frames). - Weight: 43g

The Zee Cage II has incredible holding power, and it's compatible with SWAT solutions for tool and storage integration. For easy bottle access, we also gave it a unique side-loading design that allows you take pulls from the right-hand side. - SWAT-compatible design allows for storage and tool integration. - Reinforced composite material improves durability without adding weight. - Side-loading design allows for secure bottle retention with easy in-and-out accessibility for frames with a compact bottle mounting area. - Right-hand loading on the down tube—left-hand loading on the seat tube. - Sleek, minimalist design with razor-sharp graphics. - Accepts SWAT Cage Mount MTB Tool. - Accepts MTB SWAT Box (when used on compatible frames). - Weight: 43g

The Moderniste Bottle Cage continues to be a favorite for retro and contemporary bikes. The elegant, minimalist design securely holds a plastic or stainless steel water bottle. This beautifully polished cage is made from lightweight, tubular stainless steel, so it is strong and exceptionally lightweight (43g). The cage can also be squeezed inward or expanded to get the perfect fit for your preferred water bottle.

These cages are based on an old French design from the '40s or early '50s. In our estimation, they are the best looking bottle cages of all time. The Retro is a regular one-handed cage; you insert the bottle just like in any other cage, but it holds the bottle very securely due to the spring-like shape. You can spread the cage for an oversized bottle, or squeeze the cage inward for a better fit with (for instance) a metal water bottle. Retro cages are made by hand from a single length of 3mm stainless steel rod and then electro-polished. If you examine it closely from all angles you'll see that it is, indeed, hand made. There are two versions of our cage. This is "Type II," with a tab on the back to hold smaller and regular plastic bottles securely. "Type I" has no tab, which is the traditional design and is the better option if you're using taller metal water bottles such as the 27oz Klean Kanteen.

The Ultimate Drink Holder! ABC – ANY BOTTLE CAGE! Fits almost any bottle, cup, or container 2 1/4" to 4 3/4". Turn knob to tighten and turn to loosen. Crank it down so drink won't come out or set to desired interference fit for easy in or easy out. - Handlebar, frame, and seat post adapters available.

The Cannibal XC is a side entry fiberglass reinforced water bottle cage for situations where standard cages are difficult to use. -Works well with small and sloping frames

- Self-adjusting elastomer to improve bottle retention - Made with high-impact composite material

Durable, fiber-reinforced Composite Matrix construction. Optimized side-load shape for easy bottle access in compact frames. Engineered to hold bottles securely. Oval mounting holes allow fine tuning of position on frame. - Weight: 48g

Durable, fiber reinforced Composite Matrix construction. Optimized side-load shape for easy bottle access in compact frames. Engineered to hold bottles securely. Oval mounting holes allow fine tuning of position on frame. - Weight: 48g

- Ergonomic easy loading cage. - Re-enforced composite matrix construction. - 36g.

Beautifully crafted cycling bottle cage made from an extremely durable Composite Matrix material. It’s engineered and tested to securely hold bicycle water bottles while still offering left and right side-loading action. Weighing only 36 grams, its one-piece design is very lightweight and minimalistic. Compatible with all bicycle frames with standard bottle cage mounts, it performs flawlessly across all forms of riding—from gravel grinding to mountain biking to road racing. - Ergonomic, easy-loading design - Stylish, modern look - 36g lightweight composite matrix

Using the same technology of the SlideCage but for front bottle insertion and featuring a bottle size adjustment nose the Topcage delivers great performance and fits to all plastic drinking bottles.

- 100% Tough Polycarbonate - 12mm Installation Adjustability - Embossed Pattern - Road/MTB/Gravel Approved - High-End & Durable - Available For Right & Left Sides

- 100% Tough Polycarbonate - 12mm Installation Adjustability - Embossed Pattern - Road/MTB/Gravel Approved - High-End & Durable - Available For Right & Left Sides

Custom Race Plus is an evolution of the most popular bottle cage in the world. It is permeated by a distinct and unmistakable racing feel. Tested and developed "on the road" with the most important Pro Teams worldwide Custom Race Plus satisfies the expectations of all cyclists, at any level. - Top-class hold on the bottle - Self-adjusting retention system - Used by the best teams in the world - Weight: 40g - Diameter: 74mm - Material: FRP

Ice Fly completes the innovative Elite catalog of insulated cycling water bottles. This bottle ensures extreme lightness and constant maintenance of the temperature of cold liquids when on a bike, thanks to superior technical characteristics and an ergonomic design for road and MTB use. - Keeps liquids cold for up to 2.5 hours - Ergonomic grip and shockproof design - Protective cap - Dishwasher safe - BPA free

The all-new Purist Insulated features our Chromatek™ liner—a proprietary insulating barrier that lines the core to keep your liquids cold. Not only do your liquids stay cold, but new squeezable materials allow for unmatched flexibility, too. The Purist Insulated Chromatek Bottles still feature an amorphous silicon dioxide coating that's infused into the inner wall of the bottle. Essentially, this forms a glass-like finish that provides a totally natural, and completely inert, solution to the problem of your drinks staining the bottle or leaving behind any residual aftertaste. This infusion also shields your fresh water from tasting like plastic on very hot days, making it akin to drinking straight from a sparkling clean glass. The updated Fixy cap retains no push or pull of the mouthpiece, just aim and squeeze. Leak-free Heart Valve™ with ergonomic mouthpiece design provides better mouthfeel. Redesigned grip pattern for a modernized look and ease of use. - Purist infusion shields the bottle from odor, stains, and mold to keep your water pure and your bottle clean. - Chromatek™ liner keeps your liquids cold. - Updated materials make for unmatched squeezability. - Self-sealing Heart Valve™ delivers a high rate of flow with a 100% leak-proof design. - No push or pull is required to open and close the Heart ValveTM. - Easy-to-clean mouthpiece - Redesigned grip pattern for a modernized look and ease of use. - BPA-Free plastic is made from 100% FDA food-grade materials, and it's printed with non-solvent base (UV Cured), CPSC-approved ink and materials.