Packs/Racks/Baskets

Dubbed 'Straggle-Check' frame bags, these bags are designed to fit both 700c and 650b Straggler and 700c Cross Check frames. Size up one size on your bag if you've got a 650b Straggler frame and voila, it fits. These are handmade by Revelate Designs in the U.S., made of Dimension Polyant VX 21 polyurethane coated fabric. It's durable, rip resistant, tightly woven and laminated to make it highly water resistant but not fully waterproof…. Revelate advises using stuff sacks inside (such as the one in which our bags are packaged) if you risk riding in extended downpours or underwater. Surly's Straggle-Check frame bags (as well as their mountain bags) are now using a ladder strap system, which allows greater flexibility in how you attach the bag to your frame. The ladder straps let you customize the fit and placement of the mounting straps so if you have some weird contraption clamped to your frame tubes like a chain keeper, cable pulley, or some trinket grandma gave you, it won't interfere with the mounting straps on the frame bag. They're also including foam bumpers for the mounting straps to minimize thread abrasion to the bag and attachment points Quality YKK brand water resistant zippers – with an improved, water resistant zipper 'garage' – control compartment access and help keep the weather out. Zippers are sewn with a stretch panel to relieve stress on the zipper as well. Stress even kills zippers. The large main compartment has a flexible divider inside, and there's a hydration port to make sure your whistle stays wet. There's also a compartment suitable for smaller items you'll access relatively often, like your map, phone, hard boiled eggs, uncontained pudding, marbles for playing marbles, your dugout, that ring you found that makes you disappear when you put it on, or whathaveyou. Frame bags such as this are light and reasonably voluminous. They are stable because they center weight low between your wheels and body, and they go places where racks and panniers are often troublesome, like singletrack. Note: due to the rough texture of the mounting straps, prolonged use may lead to scratched or worn paint. If you're worried about keeping everything looking pristine you probably ought to look for some other type of bag, or figure a way to protect the paint, such as duct tape, or tatting a top tube doily - for example.

The Moloko Adjunct Personal Effects Receptacle is made from urethane-coated nylon canvas and designed to fit in the center of the Surly Moloko Bar. It has space for essentials and can easily be accessed while riding. - Constructed from urethane-coated nylon canvas to provide water-resistant protection - Elastic cord on top snuggly secures extraneous loose items like wrappers or gloves - Integrated light port allows a battery cord to pass through - Dimensions: 254 x 90 x 90mm

B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes. - Three slots for additional adjustments over the B-RAD 2 base - Compatible with triple bottle mounts on forks or frames, use neoprene pad and zip tie for use with standard bottle cage mounts

Surly Racks are well-thought-out, durable, expedition-worthy racks that work with most panniers. While their racks aren't limited solely to heavy duty touring, that is what they were designed for. When you're out on the road, the best option is to never ever have anything ever go wrong ever. Right? That's never a guarantee though; so having something that you can repair if it does break can be pretty clutch. Thus, the main bodies of Surly's front and rear racks are made from tubular CroMoly steel with stainless hardware. This means you can probably find someone out there that can torch it back into one piece in the rare instance things go south. The Front Rack is height adjustable and provides either a low or high pannier mounting position, which can be handy depending on terrain. When the ground gets rough, keep your gear high and dry. When the path is smooth and easy, you can load things low and keep everything balanced and stable, with the platform above the wheel providing yet more space for more stuff. It's worth mentioning they've redesigned the Front Rack hardware to be simpler to attach and more compatible with things like disc calipers and fenders. Surly also made attachment plates specifically for their Uni-Crown forks for yet more fork compatibility. This simpler design has fewer moving parts and costs less to manufacture; ergo, costs less for you to purchase. Surly's front rack WILL work with disc brakes on the Troll, Ogre, and Disc Trucker frames. It may take a bit of work to get clearance around the front caliper since the many different calipers out there are many different shapes. The new attachment plates will limit any DIY ingenuity you might need, but if you need to throw a washer or three behind the lower left bolt where the plate attaches to the fork dropout, that's not a big deal. As part of Surly's ongoing effort to make this planet last a little longer, they recently started shipping their racks with a small, reusable Surly Tool Bag that houses the rack struts and hardware. This switch helps eliminate the use of some polybags, thereby minimizing excess waste. Plus, you get a free tool bag out of the deal. Surly Front Rack will haul up to 32kg (70 lb) of well-secured, well-balanced gear over roadways and maintained off-road trails. Front Rack specifications: - Tubing diameter: 10mm - Platform dimensions: 230 x 170mm - Weight: 1382g

A sturdy steel rack which allows for mounting Thule Yepp Maxi Easyfit and Thule Yepp Nexxt Child Bike seats. Features - Compatible with most 26" city and hybrid wheeled bikes - Supports up to 35Kg/77 lbs

Minimalism to the max is a good description of the ultra-lightweight seat pack for road bikes and mountain bikes. The Micro Two was specially designed for those demanding tours when every gram counts. In addition to being 100% waterproof, the pack offers you space enough for a few critical items such as a replacement tube, a bike kit, or first aid materials. Its roll closure and elastic drawstrings allow you to collapse its size down to a minimum. And thanks to its extremely small dimensions, it can be mounted to your bike in an extremely space-saving manner. Simply attach the mounting bracket to your seat stays. Then attach or detach the pack with a single hand using the snap buckle. While the snap-on system was again enhanced for user-friendliness, the Micro Two remains compatible with all previous models. Further Features: - PVC-free, polyurethane-coated nylon fabric - No protruding plastic parts on the inside - Includes the mounting bracket - Simple attachment - Reflector

ORTLIEB's frame bag with roll closure helps you start off your bike packing adventure well-prepared. Thanks to the waterproof roll closure —which is closed by three silicone rings— paired with the proven nylon fabric, your luggage inside the bag stays absolutely dry even in the most adverse conditions. The Frame-Pack RC is ideal for storing heavy luggage, such as tools or food, centrally on the bike. This maintains a low center of gravity so that the trail fun remains high even when fully loaded. The roll closure and its large opening allow easy access and easy packing of the bag. The assembly within the frame triangle is done with strong and robust Velcro fasteners. The specific positioning of the Velcro straps along the circumference of the bag enables individual adjustment to the dimensions of your bike. The Frame Pack RC is available in two sizes —4 and 6 liters — and suitable for mounting on carbon frames. The bag is PVC-free and sustainably made in Germany. FEATURES: - Reflective logo on both sides of the bag

The ORTLIEB Toptube Frame-Pack is the smart solution for all who want to use their frame's main triangle for storage space without having to do without their water bottle. The solution also works for those who have full-suspension mountain bikes with limited triangle space. With its 4-liter payload, the Toptube Frame-Pack provides plenty of space for heavy equipment such as tent poles, tools, and food supplies, while also helping to secure a low center for improved rising performance. And given that the bag and its zipper are waterproof, you can even cross rivers on your bikepacking tour without worrying about your stuff getting wet. The Frame-Pack attaches easily to your top tube and seat tube with the help of sturdy and highly adhesive Velcro straps. FURTHER FEATURES: - Ideal for all bikes with limited triangle space - Reflecting logo ADVICE: Suitable for carbon fiber frame.

Lezyne takes seatpack storage to the next level with their M-Caddy. Inside, fitted neoprene compartments organize your gear for easy access, while a durable, water-resistant zipper guards against moisture. Plus, a bottom compartment with a Velcro closure securely stores your multi-tool away from your spare tube, eliminating the possibility of a premature puncture. The M-Caddy also boasts a reflective taillight loop for safety.

The Salsa EXP Series Anything Cradle is a bracket-mount handlebar roll system that holds gear in front of your handlebars without kinking your cables. This modular system is designed for use with our EXP Series Side-Load or Top-Load Dry Bags, or you can use your own dry bag. The Anything Cradle allows you to distribute your gear evenly, which is essential to any well-balanced bikepacking setup. - Includes Anything Cradle and two 30" Salsa EXP Series Rubber Straps - Salsa EXP Series Rubber Straps are made of non-slip TPU to hold gear securely - Anything Cradle Arms are compatible with 35.0mm handlebars or 31.8mm handlebars (with included shim) - Nylon 6/6 composite cradle, 6061 forged aluminum arms - Maximum load weight: 8 lbs. (3.6kg)

For all models with the QL2.1 system. If your mounting system-s lower anchoring hook is lost or worn, you can easily replace it with a new anchoring hook. DETAILS: - 1 anchoring hook and mounting screw

The Frame-Pack RC Toptube is the solution for everyone who likes to have access to their water bottles while also carrying gear inside the bike frame triangle. This waterproof frame bag with roll closure is also ideal for full suspension mountain bikes, where space inside the frame's triangle is limited by the shocks. Part of ORTLIEB's bikepacking series, this bag with roll closure meets the IP64 standard for waterproofness, meaning your gear is fully protected from an involuntary bath. With its 4 liter volume, the Frame-Pack RC Toptube enables heavy equipment such as tent poles, tools or food to be carried within the frame triangle, maintaining the bike's low center of gravity. The customizable, sturdy, and strong Velcro fasteners enable simple and easy fastening and an uncomplicated installation. The frame pack RC Toptube is made in Germany and PVC-free. Together with the other products from the ORTLIEB bikepacking series, the frame pack RC Toptube forms the ideal equipment for an overnighter, a self-supported race, or your next big adventure. FEATURES: - Reflective logo on both sides of the bag

Bring along the essentials with the Hot Laps 1L Bike Lumbar Pack. Your mini-tool, a tube, and some food pack into the organized main compartment, which includes a dedicated fleece-lined phone pocket and some organizers. If you're headed out under cloudy skies, there's just enough room for a packable jacket too. And lastly, the sleek deployable side water bottle pocket helps you stay hydrated. - Breathable air mesh back panel - Deployable side water bottle pocket - Internal organization - Padded, fleece-lined phone sleeve - External attachment straps

The MIK Adapter Plate is an ideal accessory if you want to carry your essential items around quickly and easily. It will unlock your ability to customize your storage options on your rack. It’s compatible with removable bicycle accessories and suitable for luggage carrier racks for the MIK system or MIK carrier plate. The MIK Adapter Plate is a must-have for your Vado, Como, or Tero. - Attaches to a wide variety of accessories, including the Turbo Basket and various Basil accessories. - Connects securely to MIK and MIK HD racks or the MIK carrier plate (not included). - 15kg max. load when used on the MIK HD rack. - Allows for fast and tool-less installation and removal. - Includes MIK stick key for increased security.

Square top-tube boxes are not aero, so step in the Rocket Pocket! The streamlined design of the Rocket Pocket eliminates stem drag. The non-slip surface underneath provides sturdy nutrition storage. An easy-slide rubber zipper pull allows for a quick, easy open and close to keep your focus on the road. Silver interior lets you find your nutrition or salt tablets quickly. It can fit the longest energy bars

A lighter duty version for MTB and commuter use. QR mechanism is secure and easy to use. 7 kg (15 lb) carrying capacity. Compatible with all MTX TrunkBags. Includes hidden storage tray, rubber bungee and safety reflector. - Clamp: Fits 25.4/31.8 mm (shims Incl.) - Bag Compatibility: MTX TurnkBags - Material: Aluminum beam / Plastic cargo deck - Max Weight Capacity: 7 Kilograms - Size: 51 x 12.5 x 9 cm / 20.1” x 4.9” x 3.5” - Weight: 688 grams

No rack, no problem. Banjo Brothers' Waterproof Saddle Trunk has a whopping 400 cubic inches of space with a waterproof main compartment and outer pockets for easy access to smaller items. A webbing loop on top lets you lash a jacket to the bag so you can reach it before the rain comes. An interior aluminum strut, stiff hull and 4-point strapping system control the load from bouncing, rattling or swaying. The best part is when you're done with your ride, you can remove it quickly and it works on pretty much any bike. - Weight: 1.25lbs - Dimensions: 12.5" L x 7" H x 6.5" W - Capacity: 400 cubic inches / 6.6 liters - Waterproof main compartment with replaceable welded liner - Outer pockets for easy access to money or keys - Webbing loop on top for attaching a rain jacket or other gear - Interior aluminum strut, stiff HDPE hull and 4-point strapping controls loads

Axiom's Transit Rack is your trusty friend when it comes to hauling gear. It's tough, it's light and it can hold panniers. Use it to commute, tour or just head to class. It handles heavy loads easily and acts a fender as well.

Whether you're heading to the beach, riding to the grocery store, or just cruisin' around, Nantucket's Surfside Rear Wire Pannier Basket will get you and all your goodies there in colorful style. This cute Pannier Basket sports mesh wire construction for durability and attaches to the rear rack with two metal hooks, making it the perfect errand-running accessory.

A lightweight under-the-seat bag for carrying ride essentials. Every Seymour bag is created using Oceanweave – Axiom’s new lightweight and durable fabric made from reclaimed fishnet – to help reduce the amount of harmful plastics in our oceans. - Volume 0.8 L / 51 cu in - Weight 72g / 0.16 lbs - OCEANWEAVE 600D recycled fishnet polyester with waterproof polyurethane coating; Red interior liner improves internal visibility - Lightweight Velcro saddle-mounting system can be cinched down to ensure a quiet load - Zippered flap opening for easy access to bag contents while bag is on bike - Interior ID pocket - Ultra-visible 3M triangle logo - LED light clip

A high-volume under-the-seat bag and water bottle pocket designed specifically for the gran fondo cyclist. Every Seymour bag is created using Oceanweave – Axiom’s new lightweight and durable fabric made from reclaimed fishnet – to help reduce the amount of harmful plastics in our oceans. CONSTRUCTION - OCEANWEAVE 600D recycled fishnet polyester with waterproof polyurethane coating - Red interior liner improves internal visibility MOUNTING SYSTEM - Lightweight Velcro saddle-mounting system ADDED BENEFIT - Zippered flap opening for easy access to bag contents while bag is on bike - Interior credit card / ID pocket - Integrated waterbottle holder - Ultra-visible 3M triangle logo - LED light clip - Volume 1.3 L / 79 cu in - Weight 126g / 0.28 lbs

A weather-resistant, bikepacking-inspired / urban-inspired seat pack bag with built-in accommodation for a U-lock. Ideal for the commuting trunk bag user who doesn't want to use a rack. - OCEANWEAVE 600D reclaimed fishnet polyester with waterproof polyurethane coating. - Water-resistant stitched construction. - Heavy-duty seat rail buckle and straps, pull up to tighten. - 3 rubberized, modular seatpost straps with CAMLOCK, ensure things stay tight, while eliminating potential damage to clothing. Can use 2 or 3, in varied positions. - Top mount bungee system with wings, provides optimum stability to top loads, etc... - Top bungee system for additional, flexible storage. - Supplemental rear closure strap system provides additional support. - Ultra-visible rear 3M triangle logo. - Polypropylene plates below saddle, ensure ample leg clearance, even if heavily loaded. - Built-in U-lock holder. - Rear light clip.

Seat Roll Asymmetrico takes everything we've learned in 5 years of producing the award-winning Seat Roll Premio and kicks it up a notch with lighter materials, reduced bulk, improved abrasion resistance, an extra pocket, and a unique asymmetric design which allows you to pack more into a smaller volume, oh, and room for up to 700x45 (29x1.75") tubes! - 2-Ply Ballistic Nylon Construction with Hypalon outer jacket - Boa L6 Closure System with Lace Guide - Padded Rail Guard protects saddle rails and speeds Installation - FOUR internal pockets: Holds tubes up to 700x45mm - Black reflective printing provide stealthy HI-VIS in low-light conditions - Weight: 85 grams

The Drafter 10L meets all your mountain bike backpack needs from hydration to protection in a compact, breathable design. Stay hydrated on the move with the 3-liter Hydrapak reservoir, located on the lumbar for a lower center of gravity, with a high-flow bite valve. Stay cool and comfortable thanks to the air suspension back panel and breathable ergonomic shoulder straps. The organizer pocket features a home for all your tools, replacement parts, and necessities. Additional features include spine protection compatibility, an external helmet carry, plus deployable armor carry straps. - 3L / 100 oz Dakine x Hydrapak 3D lumbar reservoir w/quick disconnect - High-flow Blaster bite valve w/shut-off and magnetic hose clip - AirLite Suspension back panel - Breathable ergonomic shoulder straps w/sunglasses quick stash - Separate cargo and hydration compartments - Internal ebike spare battery storage system - Padded, fleece sunglasses/phone pocket - Internal organizer pockets - Deployable external carry straps - Front quick stash & compression panel - Reflective panel and safety light attach - DK Impact Spine protector compatible (not included)

The Drafter 10L Women's Backpack meets all your mountain bike backpack needs, combining all the best technical bike pack features in a low-profile, women's-specific silhouette. Stay hydrated on the move with the 3-liter Hydrapak reservoir, located on the lumbar for a low center of gravity, with a high-flow bite valve. Stay cool and comfortable thanks to the shorter torso length, Air Suspension back panel, and S-shaped breathable shoulder straps. The organizer pocket features a home for all your tools, replacement parts, and necessities. Additional features include spine protection compatibility, external helmet carry, and deployable armor carry straps. - Women's-specific fit - 3L / 100 oz Dakine x Hydrapak 3D lumbar reservoir w/quick disconnect - High-flow Blaster bite valve w/shut-off and magnetic hose clip - AirLite Suspension back panel - Breathable ergonomic shoulder straps w/sunglasses quick stash - Separate cargo and hydration compartments - Internal ebike spare battery storage system - Padded, fleece sunglasses/phone pocket - Internal organizer pockets - Deployable external carry straps - Front quick stash & compression panel - Reflective panel and safety light attach - DK Impact Spine protector compatible (not included)

Airfoil Shape bag large enough to fit phones up to 6.75" (172mm) diagonally. Includes inside pocket for small items. Has extra long front strap, ideal for standard stems. 3.3" high, 46 cu.ins (750cc) capacity. Includes hang tag to promote cell phone usage! Structured, strap mounted bag for standard stems fits cell phones up to 6 3/4" (171.45mm) diagonally and 6-8 gels. - Upgrade to a new, higher capacity top tube bag perfect for handling larger cell phones - Comfortably fits 6-8 gels along with cell phone, or 10 gels without a phone - Keep tablets or used gel wrappers separate in a handy inside pocket - Rubberized bottom keeps the bag in place - Avoid an overheated smartphone on those hot sunny days - bag interior is insulated! - Highly visible, silver colored interior makes it easy to see contents and stay focused on the road Keep Focused on the Road: Smarter Features for Easy-Access Storage - Wide access opening to easily remove and handle cell phone - Inside pocket for tablets, cash or sticky used gel wrappers - Large, easy-pull zipper for ease of access even when race day adrenaline is at its peak - Silver colored interior makes it easy to find contents - One-handed Super-Slide zipper Aerodynamic Design Tucks Right In Behind Stem - Structured shape perfectly optimized to tuck in behind stem and headset spacers without increasing frontal area - Extra long straps ensure security on all styles of bike configurations Contents Stay Cooler - Insulated sides keep your nutrition cooler

Pack all the gear you need and enjoy the freedom of bikepacking. FrontLoader is perfect for carrying light yet bulky items like sleeping bags, camping gear and spare clothing. Featuring a tough outer support harness and constructed of durable abrasion- and water-resistant materials, it's easily installed or removed with two straps, special spacer mounts, and quick-release buckles. A backside head tube strap attachment increases load stability. An 8-liter removable waterproof drybag keeps contents completely protected from wet weather and splashes while a built-in air release button purges unwanted air from the bag to effectively compress its contents. - Material: Polyethylene / EVA / Anti-slip texture PU leather - Durable, water repellent and stain resistant - Bag Attachment: Durable NBR rubber spacers and straps with quick-release buckles - Waterproof Rating: 10,000 mm (waterproof carry bag) - Max Load: 5kg / 11lb - Waterproof carry bag - Air release button Size - 33 x 28.7 x 5cm / 13" x 11.3" x 2" - 50 x 15 x 15cm / 19.7" X 5.9" x 5.9" (Waterproof Carry Bag) Weight - Bag: 325g / 11.46oz (Black), 319g / 11.25oz (Green) - Rubber Spacers: 132g / 4.65oz

- Waterproof (IPX3) - Ajustable elatic buckle closure - Elastic mesh side pockets - Universal Bridge system - Mounting with 4 straps - Compatible with iRack, Carrymore and Racktime

- Strap with buckle and hook for supporting the Seat-Packs - Prevents lowering of pack with uneven weight distribution - Additional support for Seat-Pack straps when fully loaded - Excessive strap is fixed with Velcro - Can be used for Seat-Pack M and L

What should you do with all those small, but important extras on your bikepacking tour? The best place to put your snacks, smartphone, rain slicker, and other items is in your ORTLIEB Accessory-Pack. This convenient volume expander for your Handlebar-Pack keeps your things secure, absolutely waterproof, and quickly accessible at all times. Use the metal hooks to securely attach the Accessory-Pack to the four points of attachment on the Handlebar-Pack. And if you don't plan on spending the night outdoors and don't need your Handlebar-Pack, you can still use your Accessory-Pack as a handlebar bag thanks to its pre-mounted Velcro straps. You can even use the carrying strap to transform the lightweight bag into a shoulder or hip bag.

NEW: MOUNT NOT INCLUDED From January 2022 onward you must choose the handlebar mount that is right for your bike. Up until now we have supplied handlebar bags together with our standard bracket, but now you can order your individual mounting set separately so you can choose a mounting system that suits your needs. The waterproof Ultimate Six Plus handlebar bag is the perfect place to stow your things while keeping them at the ready whenever you need them. Depending on the model, this durable handlebar bag made of waterproof Cordura fabric has a payload of 5.7 or 8.5 liters, offering you the space you need for items you need to be able to access quickly. The smallest of the Ultimate Six Plus models distinguishes itself in terms of its transparent, user-friendly and rainproof flap compartment with a 21 x 12-cm interior that enables to secure your smartphone, GPS device, and roadmap. You can naturally operate your touchscreen device through the transparent cover. The two larger models enable the use of different inserts in case you want to stow any special gear such as your high-performance camera while you're underway. What all three models have in common is convenience. You can open the flap with a single hand, thanks to its magnetic closure, and closing it again is virtually automatic. The detachable shoulder strap transforms your handlebar bag into a convenient shoulder bag as soon as you reach your destination.. - Maximum payload: 5kg - Zippered inside pocket with carabiner for keychains - Air vents in the flap compartment prevent device overheating - Reflector made of high luminosity 3M Scotchlite material on front of bag - Accommodates the attachment of a map case and Safe-it in sizes S to XL

This carbon Mukluk specific frame bag incorporates the best features of our classic Ranger frame bag. This frame bag is for the 2017-2021 year models of the Salsa carbon Mukluk. Your frame size correlates to the frame bag size; a small fits a small carbon Mukluk. If you have an aluminum Mukluk, we recommend the Ranger. Features: - Revelate exclusive RevX-PAC panels that are 2 times as abrasion resistant as standard VX material. - Zipstretch construction pairs a bomber, wetsuit style molded-tooth zipper with our exclusive stretch Cordura panels that reduce zipper stress when closing bag. - Industry leading #10 Molded tooth zippers with urethane coated tape are basically impervious to dirt and grit that destroy more commonly used water resistant coil zippers. - Exit port in main compartment for hydration tube or wires. - Zippered left side pocket on sizes SM-XL. - Bags feature one main compartment with vertical divider. - Expanding taper front section for increased volume at head tube. - Stretch mesh internal pocket. - Front top tube attachments accommodate top tube packs. Weight: - SM: 11 oz - MD: 12 oz - LG: 13 oz - XL: 15 oz Materials: - RevX-Pac Fabric: Dimension Polyant VX-21 with proprietary abrasion resistant finish; 1050 denier domestic ballistics nylon; 420 denier diamond ripstop lining; closed cell foam padded tube sections. Made in the USA with domestic and imported materials. These frame bags are manufactured and distributed by Revelate Designs and have no affiliation with Salsa Cycles. Salsa Cycles is a trademark of Quality Bicycle Products.

The ATTK-S Soft-Side Top Tube Bag offers high-quality construction and a range of options for mounting. It offers easier access than hard-sided top tube boxes through more flexible materials and a splash-proof double zipper. It is a versatile addition for any cycling discipline when you want to carry items on the bike instead of in your pockets. - Splash-proof zipper - Waterproof fabric - Front strap attachment - Anti-Slip base - Can be mounted with straps or direct mount - Dimensions & Spec / Capacity: 264mm x 73.5mm x 40mm / 383ml - Top Tube Compatibility: Direct mount (M5 Bolt) or Velcro - Weight: 43g

The perfect pair of bags for any adventure: you'll be astonished at how much gear fits in the Ortlieb Bike-Packer Plus! The classic flap closure is easy to operate and provides a maximum of stowage on top. The waterproof, three dimensional front compartment offers additional space for many of the small items you may need to access quickly while en route. The durable, high-quality Cordura fabric provides optimal protection against water, dust and abrasion. Thanks to the proven QL2.1 system with self-closing hooks, attaching the Bike-Packer Plus to your bike rack and removing it again is a matter of seconds. All of these features allow you to devote your attention to your tour and the beautiful sights to see along the way, no matter what the weather! - Pannier pair with lid closure and large packing volume - PU-laminated Cordura - QL2.1 mounting system for racks with max. 16 mm tube diameter - 20 mm hook available as separate accessory (e.g. for E-bikes) - Reduction inserts for tube diameters 8, 10 und 12 mm with anti-scratch function preventing abrasion on the rack - Hooks adjustable without requiring tools - Lower hook rail made of two-component hard-soft synthetic with anti-scratch function protecting the rack - Including integrated inner pocket and shoulder strap - Due to its symmetrical form it is possible to use only one bag on left or right side - The dust flap - with easily operable pull cord - under the lid provides protection e.g. against water, dust and snow - The edge protector prevents contact with spokes and abrasion - Simultaneous use of Ortlieb Travel-Biker possible - Highly reflective 3M Scotchlite reflector - Easy to clean inside

Plenty of space for your day at the office—no matter whether your office is in a meadow, a cafe or an old factory building on the other side of town. The Ortlieb Commuter Daypack City is a waterproof city backpack made of lightweight, durable nylon fabric. With its roll closure, its large main compartment, and its padded notebook compartment, it provides a secure place for your documents and other gear no matter what the weather. And thanks to its outstanding carrying comfort, it's always a pleasant companion to take along. Further features: - Reinforced underside - Air-permeable shoulder straps - Back padding with ventilation channels - Removable breast and waist straps - Zippered front pocket (not waterproof) - Loops for rear light and U-lock - Reflective yarn and reflective logo for more protection at night - Dimension notebook compartment: 39cm x 27cm x 2.5cm / 15.4" x 10.6" x 1"

Banjo Brothers' Rack Top Bag attaches to pretty much any rear rack and gives you serious hauling capability. This streamlined trunk is ideal for commuting, running errands, a long day in the saddle, or even a picnic—maybe all of them in one day! It's got plenty of space for extra clothes, food, and a camera. Thick padding pulls double duty by insulating your snacks and protecting your gear. The ripstop fabric upper and rugged ballistic bottom panel are tough enough for cross-country treks, too. Reflective accents provide 360 degrees of visibility and there's a clip for a taillight as well.

- Lightweight, semi-rigid, top-tube-mounted, large smart phone holder - Rivet system to bolt onto frames with removable straps - Molded EVA foam structure with woven nylon cover - Compact design with extra-wide clamshell opening - Mesh divider keeps additional items in place - Clear, touchscreen-compatible cover - Three Velcro strap design attaches securely to the top tube - Easy access nutrition bag - Size: 19cm x 10cm x 7cm - Capacity: 0.5L - Weight: 98g

The Roll Rack fits all Specialized Roll models, as well as most bikes with a 650b wheel size. The rack also features a maximum load capacity of 15kg, and it includes a steel bracket, hook plate, and corrosion-resistant hardware. - Fits all Specialized Roll models, as well as most bikes with a 650b wheel size. - Includes a steel bracket, hook plate, and corrosion-resistant hardware. - Maximum load capacity: 15kg

The Tailwind aerodynamic panniers blend form with function, reducing drag and battery consumption by up to 6% when tested against competitors. Their low-bulk, clean-lined design delivers increased stability with a sleek aesthetic, creating a modern storage solution that lets you go further, faster, without compromising on what you carry. - 17 L capacity for all your gear, whether you're going downtown or way out of town. - Approx. dimensions (mm): 400 x 330 x 142mm (height/width/depth). - Klickfix mounting system lets you load the bags on and off your bike quickly for easy transitions, freeing up the top of the rack for additional carrying. - Compatible with all standard racks and all racks on Specialized bikes. - Sleek, water-resistant design sheds rain so your stuff stays dry when the weather gets nasty. - Unique right- and left-sided design delivers optimal aerodynamics for increased efficiency. - Internal laptop sleeve carries your computer snug and safe (laptops up to 17" screen). - 360-degree reflective graphics help drivers see you coming. - Freestanding shape for accessible loading and unloading.

Bike to hike and back again has never been easier. Based on the iconic Fjallraven Verdag backpack, the Cave Pack has been shaped to nestle into the Coolcave like an arctic fox in its den. Lift the pack out of the Coolcave and sling it on your back using the padded shoulder straps. Equipped with a padded laptop compartment and large and small pockets, the Specialized/Fjällräven Cave Pack organizes and protects your most important belongings. - 20L capacity. - Easy-access pocket. - Fully padded laptop compartment. - Large front pocket. - Easy-carry handles. - Compatible with Coolcave pannier.

Built for those who simplify and go, the Cave Tote is our minimalist accessory for your Coolcave. A large main pocket lets you fill the tote with items big and small, perfect for trips to the supermarket, picnics, and everything in between. The tote lifts out of the Coolcave to bring with you into the store, gym, or wherever. - 20L capacity. - Double handles with adjustable shoulder strap. - Small interior zip pocket. - Expandable interior cinch closure. - Compatible with Coolcave pannier. - Large Specialized/Fjällräven logo print.

These fork-mounted adapters provide simple and secure mounting points for panniers like the Coolcave. The low position maximizes handling stability, and this front option leaves the rear rack open for carrying passengers or even more cargo options. *Third-party panniers are not tested for guaranteed compatibility - Designed for frictionless compatibility with the Globe Haul ST and Haul LT. - Accepts most standard bicycle panniers, such as the Specialized Coolcave. - Includes two adapters (one for each side of the fork) and all required hardware. - 8kg (18lb) load capacity per side. - All tools required for assembly included with the purchase of the Haul ST or Haul LT bike

Banjo Brothers' Minnehaha Canvas Grocery Bag Pannier is sized perfectly for a single paper grocery bag. It's also a natural (and vegan) alternative to synthetic fabrics. Equipped with a steel frame and heavy-duty panels to prevent sagging, this handy pannier attaches to any standard rear rack (sold separately) and folds flat when not in use. Wide, comfortable carrying handles make shopping with it easy, and if that wasn't enough, the steel hooks attach to your shopping cart. Slick. Lastly, detachable reflective accents help make sure you and your groceries are visible after dark.

Shield nutrition from the wind with this E-pack storage system that mounts directly behind the stem. Its streamlined design improves airflow from stem to bike frame to improve overall aerodynamics when riding. - Bolt-on compatibility with TT frames. Can also be mounted with Velcro straps (not included) - Injected Nylon and Glass Fiber with foam base - Slotted mounting for fore/aft adjustment - Dimensions: 210mm x 40mm x 57mm - Includes FPS (Frame Protection Strips) to protect the frame when installing with cable ties - Weight: 161g

Lightweight aluminum tubing, stainless steel hardware, and fully adjustable upper stays make the Pork Chop rack a durable addition to any bike. - Fits most 700c cantilever and disc brake bikes - Tubular aluminum construction, 10mm diameter - Stainless steel hardware - Fully adjustable upper mounting brackets - W-bend at bottom of rack for easy on-and-off of hook-style panniers - Platform Dimensions: 10.75 x 4.88" - Weight: 650g - Weight Limit: 40 lbs.

Compact on-bike storage for tools and flat repair. Now updated with an oversized 30mm strap that reduces shifting during rides, the Hot Laps Gripper Bag's minimalist design stows easily almost anywhere on your bike. It's ideal for carrying essentials on a quick ride or in tandem with our larger packs on longer rides, moving weight off your back and freeing up valuable space for water and food. Keep the Gripper on your bike, and your chances of walking out of the woods are forever minimized. - On-bike storage solution - Fits spare tube, tire levers, CO2, etc. (sold separately) - Attaches under seat or at multiple locations on bike frame

The Rear Top Tube Bag is the perfect add-on to maximize storage on your bike when frame space is limited, all other attachment points have been used or you want to organize tools, spares, food, or other accessories into a separate compartment. A simple zip closure allows for easy one-handed access. Hypalon MOLLE accents on the base and rear of the bag each provide two placements for the double-sided velcro straps, allowing you to tailor the bag to be ideal for your setup. Handmade in our Yorkshire workshop from 100% waterproof textured nylon, with a nylon lining and finished with the classic vegan-friendly PU leather Restrap label. Weight - 65g Capacity - 1L - 100% handmade in Yorkshire, England - Capacity: 61 cu in (1L) - Weight: 70g All Restrap products carry a lifetime guarantee to be free of defects in materials and workmanship. We stand by our products and will cover the cost to repair or replace any defective product.

An updated Trunk Bag design for more than just e-bikes. Complete with a magnetic flap closure for easy one-handed opening and closing, and features the Top Lock mounting system for quick installation and removal from your rack's deck.

Featuring fun, kid-friendly artwork in two designs, the handlebar-mounted bag puts items within reach of small hands. The two roomy compartments are perfect for stowing water bottles, gear, clothing, or such important finds as pinecones, seashells, and stones. Keep small riders refreshed and equipped during their outdoor adventures. - Mounts to either crossbar or handlebars - 2 hook-and-loop straps - 2 roomy compartments, 102mm wide each - 80mm thick x 204mm wide x 130mm deep - 10lb maximum weight capacity - Durable, washable cloth construction - Suitable for 12-inch wheels or larger

Made of durable polyester fabric and long known as an ideal pannier for extended tours in any kind of weather, the spacious Bike Packer Classic is now available with the QL2.1 rack mounting system. The advantage of this faithful companion at your rear wheel: greater transport comfort, stability and safety. - Panniers (pair) with classic lid closure for large packing volume - Sides of PS 490 nylon material, front and back of PD 620 - QL2.1 mounting system for racks with max. 16 mm tube diameter - 20 mm hook available as separate accessory (e.g. for E-bikes) - Reduction inserts for tube diameters 8, 10 und 12 mm with anti-scratch function preventing abrasion on the rack - Hooks adjustable without requiring tools - Lower hook rail made of two-component hard-soft synthetic with anti-scratch function protecting the rack - Including integrated inner pocket and shoulder strap - Due to its symmetrical form it is possible to use only one bag on left or right side - The dust flap - with easily operable pull cord - under the lid provides protection e.g. against water, dust and snow - The edge protector prevents contact with spokes and abrasion - Simultaneous use of Ortlieb Travel-Biker possible - Highly reflective 3M Scotchlite reflector - Easy to clean inside

This versatile basket is based on Wald's popular 133 basket but uses a holder that bolts onto your handlebar. The holder offers greater clearance between the bar and basket for shifters, cables, and brake levers. Available in white (3133WH) or gloss black (3133GB) powder coat finishes. - Made in U.S.A. (Maysville, KY) - A Quick Release Basket with Bolt-on Holder for stable installation and use - Lift the handle to remove the basket and take it with you - Basket locks back in place when returned to the holder - Dimensions: 14.5 x 9.5 x 9 inches; the basket tapers to 12.25 x 7 inches at the bottom - Holder designed to fit 7/8", 1" and 31.8mm diameter handlebar - Handlebar clamps are 2" apart and offer clearance for shift and brake cables - Powder Coat Finish - Complete basket including the holder weighs 3 lbs.

The Elkhorn is a slender multi-tool of a rack. Stable and secure with 3-pack mounts on the uprights for your favorite cargo or bottle cages and more tie-down points on the deck than you could ever need. Front or rear compatible, the Elkhorn lets you feel the trail beneath you rather than the tail wag behind you. Old Man Mountain racks are the most versatile racks available. Capable of mounting to suspension forks, full-suspension mountain bikes, gravel bikes, road bikes, fat bikes, and even tri-bikes if that's what you're into. Tested and trusted in the most extreme environments on earth (we're still trying to get NASA to take them to the moon). Our racks have helped riders traverse Iceland in bitter, cold winters, carried the gear of countless GDMBR riders, and circumnavigated the globe. The only remaining question is where will it go with you? Want to use our rack on a bike that isn't made for racks? Want to swap your rack between multiple bikes? A Fit Kit is all you need. - The Short fits tires up to 27.5 x 2.8" or 700c x 50mm. - The Tall is for maximum mud clearance and fits tires up to 29 x 3.25" - The Elkhorn comes in two sizes; Short and Tall. - The Short is designed for 27.5 and 700c wheels. Fits tires up to 27.5 x 2.8" or 700c x 50mm. - The Tall is designed for maximum mud clearance and bikes with 29" tires. Fits tires up to 29 x 3.25". - Front or rear mountable. - Made from 6061 aluminum the racks are lightweight, stiff, and strong. - The rack is made from 1/2" (13mm) diameter tubing. - The deck measures 3.9" x 10.5" (100 mm x 266 mm) The deck includes slots for easily lashing gear in place and holes for mounting a light. - The Elkhorn comes standard, eyelet mount ready with optional fit kits available for thru-axle or QR mounting. - The Elkhorn has a load capacity of 25 lbs/11.34kg. - Rack weight (Short): 623 grams with 6" extenders. - Rack weight (Tall): 652 grams with 6" extenders. - Powder coated a sleek and refined shade of black. - If you want more precise fit information, the height from the mounting point to the deck is 390mm on the Short and 430mm on the tall. Be sure to leave room for debris and mud clearance. - Made in Taiwan. - Lifetime warranty

Meet the new fail-safe for your tailgate, featuring padded protection for your most prized possession. With durable PVC tarpaulin and a micro-brushed inner lining, the FOX Overland pad is designed to keep your truck and bikes clean and secure. - Raised bumpers (reinforced with high-density foam) keep down tubes secured in place to minimize frame contact - Each pad comes with two strap extenders for eMTBs - Fully adjustable rear opening to maintain function of your backup camera and keep your tailgate handle accessible at all times - Durable PVC tarpaulin on the outside and a micro-brushed inner lining ensure your tailgate is protected from cosmetic damage - Every size of Overland features cinch straps to adjust the exact height and width of your truck’s tailgate - Full-size (up to 6 bikes) - for Full Size Trucks (F-150 to F-350, 1500 - 3500 series, Tundra and Titan)

Models with the QL1 system from 2005; Models with the QL2 system. The right hook inserts allow you to securely attach your ORTLIEB pannier with its proven QL1 or QL2 mounting system (16 mm) to virtually any bike rack. - 2 inserts measuring 8 mm - 2 inserts measuring 11 mm

For all models with the QL2.1 system. Inserts are available for the two upper 16-mm mounting hooks that come with the proven QL2.1 mounting system. The inserts allow you to securely attach your ORTLIEB pannier to virtually any bike rack with smaller tube sizes (16 mm). DETAILS (PER PANNIER): - 1 pair of 8-mm inserts - 1 pair of 10-mm inserts - 1 pair of 12-mm inserts

Good news for all of those on the lookout for a convenient, waterproof bag to transport their belongings: the proven ORTLIEB "bike trunk" is now available with a Velcro roll closure! The closure of the Trunk-Bag RC (Roll-Closure) also serves as a convenient carrying handle. With a 12-liter payload and a shoulder strap, the waterproof bag that mounts on top of your bike rack is ideally suited for longer tours and brief forays to the supermarket. Even when the bag is fully loaded, your smartphone, wallet, and keychain remain quickly accessible thanks to the inside pocket and carabiner, as well as an additional, non-waterproof exterior pouch. The Rack-Lock Adapter, the winner of the Eurobike Award, ensures that the bag fits on virtually any bike rack with a width of 60 to 160 mm. Clip it on, secure it and remove it again. It's a snap!

When it's time to load up the bike and go, whether it's across town or across Europe, Banjo Brothers' Rack Top Pannier Bag has the features to serve you well. It attaches to pretty much any rear rack and gives you huge cargo capacity. It's trim when you just do quick jaunts and if you need serious room, just drop the panniers down and go big. Thick padding pulls double duty by insulating your snacks and protecting your gear. The ripstop fabric upper and rugged ballistic bottom panel are tough enough for cross-country treks, too. Reflective accents provide 360 degrees of visibility and there's a clip for a taillight as well. What's more, a detachable shoulder strap lets you carry the whole bag easily into the office or up to the summit for a photo-op. - Includes a detachable shoulder strap, a loop for a safety light, and an internal key clip, and coin pocket - Expandable from 900 to 1300 cubic inches with a drop-down pannier on either side - Thick padding insulates snacks and protects gear - Fits most rear-mount bike racks - Ripstop fabric upper with rugged ballistic bottom panel - Offers more visibility with 360 degree reflective accents - Weight: 934g

Allows Thule Yepp Maxi to be installed on a bike with a rear rack with a load capacity of at least 35 kg/78 lbs and the ability to carry seat and bike bags. Features: - Fits rear racks measuring 11-17cm/4.5-6.7" - For use on rear racks with a load capacity of at least 35kg/78lbs

Durable polyester fabric make this pannier a long lasting touring companion. The waterproof roll closure ensures safe and waterproof storage of food and equipment. With its QL2.1 fixing it is quickly mounted and taken off the bike rack. A shoulder strap provides carrying comfort when taken off the rack. - Classical rear pannier (pair) with roll closure - Sides of PS 490 nylon material, front and back of PD 620 - QL2.1 system for racks up to 16 mm - 20 mm hook available as separate accessory (e.g. for e-bikes) - Including reduction pieces for tube diameters 8, 10 and 12 mm; with anti-scratch function reducing abrasions on rack - Top QL hooks and lower sliding hook adjustable without requiring any tools - Lower hook rail made of two-component "hard-soft" synthetic reduces abrasions on carrier - Including integrated inner pocket and shoulder strap - Can be used individually (e.g. for shopping, sports, picknick) - Can be combined with the ORTLIEB Rack-Pack size S or M - Highly reflective Scotchlite reflector - Easy to clean inside - Optional accessories: ORTLIEB carrying system, outer pockets (size S), mesh pocket, bottle cage, 20 mm QL2.1 hook, anti-theft device long - Note: In order to meet standard IP64 (6=dustproof, 4=protected against splash water coming from all directions) the closure must be rolled 3-4 times.

Designed with minimalist riding in mind, the Anything Bracket mounts to standard or Three-Pack frame bosses and works directly with the Anything Pack, allowing you to carry essential items on the bike. - Combines placement of the Anything Pack and standard water bottle cage in a single location - Mounts to standard or Three-Pack bosses on forks and frames - Bracket is constructed of lightweight 6061-T6 aluminum - Includes Anything Pack, mounting hardware and strap - Anything Pack features a roll-top closure for easy access