Lubes/Cleaners

- Frees seized parts - Disperses moisture to prevent rust and corrosion - Provides light lubrication for moving parts - Reduces metal-to-metal contact - Prevents dirt adhesion - Cuts down on friction to improve component efficiency

A proprietary ceramic formulation containing integral Boron Nitride compounds for low friction in dry and dusty conditions. Formulated with our unique eBike specific lubricity pack to handle the higher-torque loads of an eBike drivetrain. Ideal for chains, cables, shifters, derailleurs & pedals. - Creates a dry ceramic coating for increased durability and dry condition performance - Contains Boron Nitride compounds - Ceramic compounds provide ultra-low friction for unparalleled lubrication - Non-dust attracting - excels in dry and dusty conditions - Utilizes biodegradable organic compounds - Ideal for road and off-road

Chris King Blue Grease is a resilient lubricant optimized for headsets and as a general assembly compound. Viscous and tacky, Blue Grease is an ideal headset bearing lubricant and assembly compound, engineered to withstand extreme riding conditions. Compatible with steel and ceramic bearings.

Finish Line's Ceramic Wet Lubricant provides outstanding protection for your drivetrain in even the nastiest conditions. Its ceramic bonding technology allows you to greatly extend your re-lubing intervals so you can spend more time riding and less time on routine maintenance. In fact, every time you apply the lube, it builds on the ceramic coating and the result is a chain so slippery even dirt has a hard time sticking! Think efficient. Think quiet. Think Finish Line!

Finish Line® Super Bike Wash™ is ready to use and requires no water rinsing. It quickly cleans dirt, dust, clay, grime, chain soils, nutritional residues, and winter storage grunge off all surfaces of your bike. Super Bike Wash™ uses state of the art, eco-friendly cleaning agents that work together to create a high speed cleaning system. It requires little to no scrubbing. Super Bike Wash™ is non-toxic and meets the highest readily biodegradable standards. It can be safely used indoors or outdoors. Super Bike Wash™ can be used two ways: spray on and wipe off, or spray on and hose off. It is strong enough to remove surface grime from the drivetrain, and safe enough to remove grime build up on frames, saddles, brakes, and handlebar tape. It is safe for use on carbon fiber, titanium, aluminum, steel, and clear coat. • Ready to use with no water rinsing required • Safe for use on all surfaces and paint finishes • 100% readily biodegradable and non-toxic • State of the art cleaning agents remove dirt and grime • Superior rust inhibitors protect metal parts after application • Also available as a concentrate

Whether you're fine-tuning your new full-suspension rig or tuning a fork you've ridden for years, Finish Line's Max Suspension Spray is a pro-grade stiction-fighting stanchion lubricant that maximizes the performance of your suspension. It smooths suspensions that have become dry or dirty and restores full travel and eliminates noise, too. Use Max before rides to ensure maximum responsiveness over the smallest of bumps, and the longest possible travel over extreme terrain. And, use Max to break in new forks or bring old ones back to life. It also conditions and protects rubber seals and O-rings and improves the surface slip of coated stanchions. - Helps suspension forks run more smoothly and quietly - Made with polysiloxane and advanced fluoropolymers

Wet Lube is typically recommended for extreme conditions. Formulated with high viscosity synthetic oils, water repelling polymers, and advanced anti-wear additives. Wet Lube is Finish Line's strongest, longest lasting and most water resistant lubricant. Wet Lube goes on wet, and stays wet, to provide maximum drivetrain smoothness, extremely quiet rides, and ultimate rust protection in the harshest of environments. If you use Wet Lube for riding off-road or in dry climates, be sure to wipe the excess from parts to minimize the attraction of dirt and grime. Since 1994, when Wet Lube was first introduced, it has become the preferred lubricant for many professional on and off-road teams around the world. Use Wet Lube when you ride hard and long. Proven performance for 100-plus mile rides, muddy off-road conditions, long rainy commutes, and foggy salt-air coastal climates. A heavier, wet-style lubricant that requires a little more attention to drivetrain cleanliness, but delivers the ultimate in lubricity and protection.

Finish Line® Super Bike Wash™ is ready to use and requires no water rinsing. It quickly cleans dirt, dust, clay, grime, chain soils, nutritional residues, and winter storage grunge off all surfaces of your bike. Super Bike Wash™ uses state of the art, eco-friendly cleaning agents that work together to create a high speed cleaning system. It requires little to no scrubbing. Super Bike Wash™ is non-toxic and meets the highest readily biodegradable standards. It can be safely used indoors or outdoors. Super Bike Wash™ can be used two ways: spray on and wipe off, or spray on and hose off. It is strong enough to remove surface grime from the drivetrain, and safe enough to remove grime build up on frames, saddles, brakes, and handlebar tape. It is safe for use on carbon fiber, titanium, aluminum, steel, and clear coat. Features & Benefits: - Ready to use with no water rinsing required - Safe for use on all surfaces and paint finishes - 100% readily biodegradable and non-toxic - State of the art cleaning agents remove dirt and grime - Superior rust inhibitors protect metal parts after application - Also available as a concentrate

- Exclusive 100% synthetic bike chain lube - Special surface active formula reduces rolling resistance of drivetrain and improves shifting performance - Deep chain penetration ensures quiet operation - Waterproof formula protects drivetrain under load and extends chain life

Maxima Plush Dynamic is an advanced specialty fluid formulated for high-performance suspension systems. Formulated and tested with OEM engineers and designed for use in lower fork legs and multiple other non-damper components. Surface active technology reduces static and dynamic friction and considerably lowers the force needed for easy breakaway, providing smooth action throughout the entire range of travel. Contains special seal conditioners for extended seal life. Ultra-clean detergents keep the system clean and off long-life, trouble-free operation. For all lower fork legs and other non-damper suspension components, including All Mountain, XC, Gravel, Downhill, Enduro, and Freeride. Also approved for use in some dropper seat post designs. NOTE: Rockshox will be listing Plush Dynamic as the lower lube to use in all MY23 + beyond forks. Dynamic Light is a direct replacement for 0w30 in all forks specifying the use of Rockshox 0w30. Features: - High-performance lube for lower fork legs. - Dynamic Lube activates on loaded bushings and seals. - Reduces static (stiction) and dynamic (running) friction. - Proprietary additive system minimizes wear and keeps the system clean. - Long-life fluid extends the time between rebuilds.

Wolf Tooth WT-1 Chain Lube is a synthetic lubricant and a chain treatment in the same bottle. As a synthetic chain lubricant, WT-1 will improve the mechanical efficiency of your drivetrain while lasting 3-5x longer than most other chain lubes. As a chain treatment, WT-1 will clean your chain by pushing dirt and debris to the surface where it can be wiped away. It will also protect your chain in all riding conditions, and allow you to ride longer between applications. - Cleans, lubricates, and protects chains - Peak performance in all conditions, wet and dry - Also works on other places of your bike, including hubs, cables, and jockey wheels

RockShox's Suspension Oil comes in different weights to match the most popular suspension fork and shock setups.

Keep your Reverb dropper post performing at its best with RockShox's Reverb Hydraulic Fluid. It's optimized for the remotes of the Reverb as well as the Monarch XX rear shock.

RockShox Dynamic Seal Grease - Recommended for rear shock service

- A biodegradable degreaser that cuts through the toughest grime - Strong enough for the metal parts, Yet safe enough to clean parts with rubber o-rings and seals, urethane elastomers, and painted surfaces - Exceeds all federal V.O.C. and California carbon regulations - Law prohibits ORM-D materials from shipping by air

Finish Line® Dry Lube is the bicycle industry's original and most versatile dry-style chain lubricant. It is formulated with high-performing nano-ceramic boron nitride. This Non-Stick Ceramic Technology is 100% fluoro-free and sets up with a dry ‘wax-like’ film. It attracts less grime and delivers a low coefficient of friction over long re-lubrication intervals. It is ideal for riding on or off-road, in dry, dirty, dusty environments, and also holds up well in wet conditions. Designed for chain applications, it can also be used on derailleurs, shifters, cables, and brake pivot points. Dry Lube delivers optimum drivetrain efficiency without attracting excessive amounts of abrasive contaminants. • Formulated with Non-Stick Ceramic Technology • Lowers friction, improves pedaling efficiency, reduces wear • Quickly sets up dry and clean • Minimizes the attraction of abrasive contaminants • Low surface tension easily penetrates chain pins • Biodegradable and 100% fluoro-free

- Highly concentrated. Activate with water for incredible results or dilute for lighter degreasing tasks. - Engineered to fight its way to metal surfaces and stay there, then attack and break free the bonds holding oils, soils, and grime in place, and finally dissolve and contain to carry it all away. - Safe on any material, fully biodegradable, solvent-free, plant-derived, and zero-VOC. Degreaser 13 is a highly concentrated degreaser engineered for use with water to tackle tough degreasing tasks. Developed from scratch, specifically for the challenges of bicycle drivetrain degreasing, the advanced formula is engineered to fight its way to metal surfaces and stay there, then attack and break free the bonds holding oils, soils, and grime in place, and work together with water to dissolve and contain to carry it all away. Activate with water for incredible results on tough jobs or dilute for lighter degreasing tasks. Fully water soluble and further activated by scrubbing, agitation, and rinsing, the result is a spotless residue-free drivetrain. The advanced formula is also safe to use on any material, fully biodegradable, solvent-free, plant-derived, and zero-VOC.

High-performance brake and clutch fluid designed to lubricate and protect critical brake system componentry while providing reliable stopping power. Anti-vapor lock formulation maintains responsiveness and performance by fighting both water contamination and vaporization. Advanced chemistry resists corrosion, and oxidation and is compatible with SBR, EPDM, and natural rubbers. Exceeds the requirements of US FMVSS 116 DOT 5.1, DOT 3 & DOT 4, SAE J1703, SAE J1704, and ISO 4925 (Classes 3, 4 and 5.1). For use in all hydraulic clutch systems and all brake systems specifying DOT 5.1 brake fluids. Do not use in DOT 5 silicone brake systems or mix with silicone-based fluids. Features: - For use in all vehicles specifying DOT 5.1 brake fluid. - Durable and reliable stopping power. - Anti-vapor lock formulation maintains a responsive lever and pedal feel. - Resists corrosion, oxidation, and boil-off. - Mixes with other DOT 3, DOT 4, and DOT 5.1 brake fluids. - Exceeds US FMVSS 116 DOT 5.1, DOT 3 & DOT 4, SAE J1703, J1704 and ISO 4925 (Classes 3, 4 and 5.1).

Tri-Flow Superior Lubricant is a light viscosity lube that allows for deep penetration into hard to reach moving parts. - Ideal for all conditions - wet, dry, road and trail - High grade petroleum oils provide optimum lubrication under extreme temperatures (-60 to 475F) and humidity

Our Tenacious Oil is used for ultimate protection and durability for components that have movement with metal-to-metal contact. Our base oil has been produced for us by the same independent California refinery since 1971. The final blending of rust inhibitors and extreme wear additives happens at our facility before the product is bottled and shipped. - Ultimate protection and durability for metal-metal contact - Base oil with rust inhibitors and anti-wear additives

- Improves braking performance - Treats pads and rotors to reduce brake squeal - Prolongs disc pad and rotor life - Rapidly removes brake dust, oil, grease, brake fluid and grime - Re-hydrating formula that's acetone free to preserve braking components - Safe to use on both bicycles and motorcycles

- Includes: Footwear Shield, Bike Shoe Cleaner, Foam Fresh, premium Shoe Brush, Microfibre cloth and storage tote bag - Bike Shoe Cleaner removes dirt, grime and odors - Footwear Shield is a spray on water repellant - Foam Fresh helps break down hard to remove dirt and grime

- Highly versatile dry weather chain lubricant - Deep penetrating, durable P.T.F.E. chain lubricant - Hold up to extreme conditions which can destroy ordinary lubes - Comfort bottle with pipette system for ease of use and application

Tri-Flow Superior Dry Lubricant was specifically designed to lubricate like an oil and stay clean like a wax. Its exclusive formula includes paraffin wax and high grade petroleum oil which penetrates as it quickly sets up and dries, leaving a thin, visible, coating that repels water as it lubricates. - Specifically designed for lubricating chains - Applicator is not included or needed because of the product's consistency

Specially formulated low-friction lubricant for the seals and bushings of the air chamber for front and rear Fox Racing Shox. Float Fluid is the recommended lube for use with Fox forks and shocks. - Use when rebuilding Fox suspension to lubricate foam rings and seals - Corrosion inhibitor

10 Weight Green Damper Fluid For rebuild and repair of Fox suspension. - 10 weight, 32oz bottle

Specially formulated low-friction lubricant for the seals and bushings of the air chamber for front and rear Fox Racing Shox. Float Fluid is the recommended lube for use with Fox forks and shocks. - Use when rebuilding Fox suspension to lubricate foam rings and seals - Corrosion inhibitor

RockShox's PM600 Military grease is great for suspension rebuilds. It delivers excellent shock feel, and keeps your gear running at its best. • Used as an assembly lubricant for dust seals, rebound dampers, spring top caps, air springs, and compression damper top caps • 500+ degrees melting point • Soluble in suspension fluid

- Premium greyish-black grease - Great for suspension pivots, seatposts, joints, etc

Finish Line's Stanchion Fluoro Oil drastically reduces suspension fork "stiction" to improve your fork's freedom of movement. Stanchion Fluoro Oil is pure fluoropolymer oil — so slippery it even improves the surface slip of Teflon-coated surfaces! Plus, it conditions and protects seals and O-rings to help your fork work better longer. And, you can even use it on derailleur pivots and cables.