Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Tools

$16.95
- Spider removal tool (EV-8550) is compatible with all e*thirteen cranks that have a removable spider. Can also be used as an installation/removal tool for e*thirteen bottom brackets - Crank Arm Extractor tool kit (EV-8555) is compatible with e*thirteen cranks using a 1 degree spindle taper—it is not compatible with 3 degree cranks. 1 degree cranks can be identified by the laser etching on the non-drive side end of the spindle. All 2015+ e*thirteen cranks use 1 degree taper. Includes bolt, washer and extractor tool.
$47.95
- A slim, strong multi-tool with 11 functions for common bike repairs and everyday needs - Six hex bits are stored inside the handles that fit into the end of a ball detent swivel head for use. It is small enough to fit into a riding tool wrap or pocket, and has an optional key ring attachment to fit on any keychain for use away from the bike - All bits are ED-coated and corrosion-resistant - Magnets keep all bits in place and secure - Ball detent swivel head tested to over 40Nm of torque - Same bits as 8-Bit System and EnCase System multi-tools - Includes: Six bits with eleven functions: 2, 2.5, 3, 4, 5, 6, and 8mm hex; flat head #3.5 and Phillips #2 screwdrivers; and T10 and T25 Torx-compatible bits
$69.95
8-Bit System is a multi-function tool that regroups all potential needs in the field -01 and -02 : 8-Bit Multi-tool plier offer 17 functions: - Master link plier - Valve core wrench; Torx T10 and T25; flat head #3.5; Phillips #2; and hex 2, 2.5, 3, 4, 5,6 and 8mm bits - Includes a tool for clearing tubeless valve stems and a spoke wrench - Storage for one set of quick links -03 : 8-Bit Chainbreaker + Utility Knife Multi-Tool add-on - Chain breaker - L key has a 3mm hex forked tire plug insert - Utility knife - Attach to 8-bit plier with magnets and short pins - Items for internal storage are sold separately -04 : 8-Bit Tire Lever + Rim Dent Remover add-on - Tire lever - Aluminum rim dent remover is designed for use with alloy rims - Attach to 8-bit plier with magnets and short pins -05 : Complete Kit Including Plier and both add-on
$34.95
- The 8-Bit Tire Lever + Multi-Tools have two functions and can be nested with the 8-Bit Pack Pliers - Multi-tools in the 8-Bit System attach to each other with magnets and short pins - Plastic tire lever is compatible with tubed and tubeless tires
$139.95
8-Bit System is a multi-fonction tools that regroup all potential needs in the field -01 and -02 : 8-Bit Multi-tool plier offer 17 functions: - Master link plier - Valve core wrench; Torx T10 and T25; flat head #3.5; Phillips #2; and hex 2, 2.5, 3, 4, 5,6 and 8mm bits - Includes a tool for clearing tubeless valve stems and a spoke wrench - Storage for one set of quick links -03 : 8-Bit Chainbreaker + Utility Knife Multi-Tool add-on - Chain breaker - L key has a 3mm hex forked tire plug insert - Utility knife - Attach to 8-bit plier with magnets and short pins - Items for internal storage are sold separately -04 : 8-Bit Tire Lever + Rim Dent Remover add-on - Tire lever - Aluminum rim dent remover is designed for use with alloy rims - Attach to 8-bit plier with magnets and short pins -05 : Complete Kit Including Plier and both add-on
$69.95
The new 8-Bit System is a group of multi-tools designed to work together to solve most trailside fixes. They are lightweight, strong, versatile, and small enough to fit in a jersey pocket or riding tool wrap. Three multi-tools begin the 8-Bit System: 8-Bit Chainbreaker + Utility Knife Multi-Tool, 8-Bit Tire Lever + Rim Dent Remover Multi-Tool, and 8-Bit Pack Pliers. A total of 22 functions between the three tools will keep you rolling to the next town or trailhead. - 17 functions: spoke wrench; valve core wrench; flat head #3.5 and Phillips #2 screwdriver bits; 2, 2.5, 3, 4, 5, 6, and 8mm hex; and T10, T25 Torx-compatible bits; install and remove master links; clear tire sealant clogs from valve stem; tighten valve stem lock nut - Magnets keep all bits in place - Ball detent swivel head helps access hard-to-reach places - Handle doubles as breaker bar for extra torque when head is bent - 8mm hex bit tested to over 40 Nm torque - Pliers works with 9-, 10-, 11- and 12-speed master links and chains (not compatible with Campagnolo 12-speed chains) - Master Link storage is compatible with SRAM PowerLock Link, Shimano Quick-Link, KMC Missing Link and other similar master links (not compatible with Connex Links by Wipperman)
$19.95
8-Bit System is a multi-fonction tools that regroup all potential needs in the field -01 and -02 : 8-Bit Multi-tool plier offer 17 functions: - Master link plier - Valve core wrench; Torx T10 and T25; flat head #3.5; Phillips #2; and hex 2, 2.5, 3, 4, 5,6 and 8mm bits - Includes a tool for clearing tubeless valve stems and a spoke wrench - Storage for one set of quick links -03 : 8-Bit Chainbreaker + Utility Knife Multi-Tool add-on - Chain breaker - L key has a 3mm hex forked tire plug insert - Utility knife - Attach to 8-bit plier with magnets and short pins - Items for internal storage are sold separately -04 : 8-Bit Tire Lever + Rim Dent Remover add-on - Tire lever - Aluminum rim dent remover is designed for use with alloy rims - Attach to 8-bit plier with magnets and short pins -05 : Complete Kit Including Plier and both add-on
$139.95
- The 8-Bit Chainbreaker + Utility Knife multi-tool has four functions and can be nested with 8-Bit Pack Pliers - Features a chain tool on one end and a mini utility blade on the other. The chain tool is operated by a 3mm hex L key that doubles as a tire plug insert - The handles of this multi-tool slide open to provide storage for tire plug inserts, valve cores, and a spare mini utility blade - Strong, lightweight, and designed to fit in a tool wrap, jersey pocket, or frame bag - Chain tool is compatible with all chains - L key has a 3mm hex on the short end and a forked tire plug insert on the long end - Utility knife blade is retractable - Items for internal storage are sold separately - Multi-tools in the 8-Bit System attach to each other with magnets and short pins - Tool Kit 2 includes 8-Bit Tool, knife/chainbreaker, and disc brake tool
$29.95
-Mminimalist, lightweight option to cover essential tool functions. It is stored at the end of an axle during rides as a multi-tool that is easy to access for quick adjustments and trailside fixes - On one side of the handle is a 5mm hex end stepped to 6mm closer to the handle that fits into the end of an axle. The other side of the handle has a 4mm opening for two double-sided hex bits that nest on the inside of the handle via magnet - Compatible with Wolf Tooth axles that have threaded axle bolt - Includes: Four bits: 2, 2.5, 3, and 4mm hex; flat head #3.5 and Phillips #2 screwdrivers; and T10 and T25 Torx-compatible, hex adapter
$44.95
This lightweight chainwhip is strong enough to be your go to chainwhip, but light enough that you won't need to leave it at home when on the move. - Compatible with any cassette up to and including 12 speed cassettes - Design and manufactured in Minneapolis, MN USA - 7075-T6 Aluminum
$19.95
This adapter tool alows for installation of the crown race without damaging seals. It is compatible with the Park Tool CRS-15.2 crown race setting tube. Internal o-ring retains this adapter on the setting tube during use and storage. CNC machined from aircraft grade aluminum billet. - Fits Park Tool CRS-15.2 crown race setting tube - Design and manufactured in Minneapolis, MN USA - Material - aircraft grade aluminum
$119.95
In-bike storage and essential riding tools that can meet the needs of almost any trailside repair. Durable, flexible storage sleeves make for a secure, clean place to stow EnCase System tools or other small items. Fits most mountain bars and most road bars thanks to a storage sleeve with a customizable rubber flap that can be cut to meet your handlebar inner diameter. - 14 functions (spoke wrench; valve core wrench; flat head #3.5; Phillips #2; 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, and 8mm hex; and T10, T25, and T30 Torx) - Magnets & O-rings keep all parts in place - Ball detent swivel head helps access hard-to-reach places - Handle doubles as breaker bar when ball detent swivel head is bent for extra torque - Store in handlebar with a Wolf Tooth EnCase Storage Sleeve (included) - Magnet on bottom end of tool allows for storage on steel bike stands (or refrigerators) - Fits most standard mountain handlebars and most drop bars (except ergonomic drop bars that have hard angles in the drops) - Chain & Tire Plug tool compatible with all bicycle chains including 12-speed - Inserter tool and bacon strips plug holes in tubeless tires - Five strips included; refills available - Hardened steel pin for lifetime durability - Requires 4mm hex for chain tool driver which can be found on the EnCase Hex Bit Wrench - Storage sleeves made of vibration-damping material and snug fit prevents rattling - Durable precision-machined aluminum end caps - Custom fit rubber flap can be trimmed to fit in smaller diameter bars - Bonus storage space—fits a Presta-to-Schrader adapter and valve core or a master link (both sold separately) - Includes Drop Bar Fit Kit to customize fit for larger-diameter road handlebars
$49.95
Fix tubeless tire punctures and broken chains. This multi-tool has a chain tool on one end and a tire plug built into the handle, with inner storage for tubeless tire plugs. The full multi-tool was designed for use with an EnCase System Storage Sleeve, which fits inside bar ends of your handlebars. Ride with this multi-tool in a storage sleeve or in a tool wrap for easy repairs while riding. - Compatible with all bicycle chains, including 12-speed - Inserter tool and bacon strips plug holes in tubeless tires - Five bacon strip tire plugs included; refills available - Hardened steel chain pin driver for lifetime durability - Store in handlebar with a Wolf Tooth EnCase Storage Sleeve (sold separately) or carry in a jersey pocket - Chain tool driver requires 4mm hex (available on EnCase System Hex Bit Wrench) - Fits most standard mountain handlebars and most drop bars (except ergonomic drop bars that have hard angles in the drops)
$49.95
Make simple trailside or roadside repairs with this multi-tool that has 14 functions. An 8mm hex head has a 4mm insert to fit each of the eight attached hex bits. With its slim design, this multi-tool can be stowed inside an EnCase System Storage Sleeve to be carried in handlebar ends as it was designed, or a mainstay on any home workbench. - 14 functions (spoke wrench; valve core wrench; flat head #3.5; Phillips #2; 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, and 8mm hex; and T10, T25, and T30 Torx) - Magnets & O-rings keep all parts in place - Ball detent swivel head helps access hard-to-reach places - Handle doubles as breaker bar when ball detent swivel head is bent for extra torque - Store in handlebar with a Wolf Tooth EnCase Storage Sleeve (sold separately) - Magnet on bottom end of tool allows for storage on steel bike stands - Fits all standard mountain handlebars and most drop bars (except being ergonomic drop bars that have hard angles in the drops)
$34.95
Easily carry everything you need for trailside repair, in a secure out-of-the-way location. The engineered design and rubber material of the sleeves keeps everything securely in place, prevents the multi-tools from rattling, and protects the multi-tools from dirt and moisture while still being simple to remove without tools. Extra space was created in the bar plugs to store a Presta-to-Schrader adapter and valve core or a master link for support on the trail. - Bonus storage space—fits a Presta-to-Schrader adapter and valve core or a master link (both sold separately) - Vibration-damping material and snug fit prevents rattling - Durable precision-machined aluminum end caps - Custom fit rubber flap can be trimmed to fit in smaller diameter bars - Included Drop Bar Fit Kit to customize fit for larger-diameter road handlebars - Fits most standard mountain handlebars and most drop bars (except ergonomic drop bars that have hard angles in the drops)
$32.95
The Masterlink Pliers is a multi-tool developed to provide functions that are not on a typical multi-tool. It is designed to be light and compact so you can carry it with you. This tool serves as a tire lever, valve core remover, valve stem lock nut wrench, and master link pliers. It also provides storage for two master links so you will always be prepared on the trail. Magnets hold the master links securely in place and self close the tool. - Weight: 38.5g - Size: 116 mm x 20 mm x 9 mm - Material: 7075-T6 aluminum - 9, 10, 11, and 12-speed master links and chains - Compatible with SRAM PowerLock Link, Shimano Quick-Link, KMC Missing Link and other similar master links
$144.95
The Pack Hanger Alignment Tool allows quick adjustments to be made to the derailleur hanger while on the trail or in the workshop. Alignment fixes are quick and intuitive, as you only need to adjust the hanger handle until it is parallel with the indicator rod. By using the bike's axle for reference, you don't need to be concerned with the wheel for making adjustments to the hanger. This new tool has included options for QR and thru axle. And for simple and durable storage, the components of this tool also nest inside of the handle. - Quick, easy deployment at the trailhead or workshop with all components ready to go inside the handle. - Tightening knob employs a clever rock-to-lock thread engagement that saves time while installing and removing. - Alignment is made by a simple, intuitive process of lining up the handle to the indicator rod. No turning the wheel or dodging spokes required. - Works on 12mm thru axle and 5mm quick release bikes
$119.95
The Pack Hanger Alignment Tool allows quick adjustments to be made to the derailleur hanger while on the trail or in the workshop. Alignment fixes are quick and intuitive, as you only need to adjust the hanger handle until it is parallel with the indicator rod. By using the bike's axle for reference, you don't need to be concerned with the wheel for making adjustments to the hanger. And for simple and durable storage, the components of this tool also nest inside of the handle. - Quick, easy deployment at the trailhead or workshop with all components ready to go inside the handle. - Tightening knob employs a clever rock-to-lock thread engagement that saves time while installing and removing. - Alignment is made by a simple, intuitive process of lining up the handle to the indicator rod. No turning the wheel or dodging spokes required. - Works on 12mm thru axle bikes
$44.95
This ultralight hex and bottom bracket wrench has a 1-inch hex at one end and an external BB cup spline at the other end. The 1-inch hex end features magnets that quickly couple with Wolf Tooth's steel hex insert tools. - 1-inch hex drive at one end and 16-notch 44mm bottom bracket tool (or centerlock rotor tool) at the other end - Includes the wrench only. Steel inserts are not included but can be purchased separately - 1-inch hex drive interface compatible. Magnets inset allow quick coupling and decoupling of steel inserts
$29.95
Flat wrench inserts from Wolf Tooth turn your flat wrench into many other tools. - All inserts are 1 inch hex drive interface compatible - Design and manufactured in Minneapolis, MN USA - Nickel plated 4140 chromoly steel
$11.95
Resolve Dropper Post Rebuild Kit includes refill fluid, graduated cylinder, and 10 travel adjustment spacers.
$9.50
Our 2437 open bore adapter is used to press 24x37 sealed bearings into bottom bracket cups, and direct fit frames like trek BB90. The adapter is machined with one step at 24mm ID, which fits into the center of the sealed bearing. - Installs: 24x37 bearing - Inner step outer diameter: 23. 8mm - Outer diameter: 36. 8mm - Thru hole diameter: 0. 387" (9. 8mm) - Inner hole sized to fit 1/2" threaded rod - Compatible with BP0006, BP0007 - Machined, red anodized aluminum - Sold individually (2 drifts required for some installations)
$35.00
Sealed bearing extractor for 29mm ID bearings. Extractor has 1/2" thru hole for use with our 1/2" threaded rod press handles. - This extractor is part of a system that requires additional pieces to function.
$9.50
This 29mm open bore adapter is used to press 29mm x 42mm (DUB) sealed bearings. The adapter is machined with one step at 29mm OD, which fits into the center of the sealed bearing. For use with Wheels Mfg. bottom bracket press (PRESS-7 , PRESS-7-PRO or PRESS-9-PRO). - Inner step outer diameter: 28.9mm - Outer diameter: 41.8mm - Thru hole diameter: 12.8mm (1/2-inch) - Thickness: 7mm - Machined, red anodized aluminum - Sold individually
$9.50
Our 6806 open bore adapter is used to press 42x30 sealed bearings. The adapter is machined with one step at 30mm ID, which fits into the center of the sealed bearing. Common bearing size for BB30 frames and bottom brackets. - Installs: 6806 bearing - Inner step outer diameter: 29. 9mm - Outer diameter: 41. 8mm - Thickness: 7mm - Thru hole diameter: 0. 387" (9. 8mm) - Inner hole sized to fit 1/2" threaded rod - Compatible BP0006, BP0007 - Machined, red anodized aluminum - Sold individually (2 drifts required for some installations)
$122.99
- Need to find your axle thread pitch? This ruler has you covered with a wide range of measurements in both male and female for solid, QR and thru-axles - Works with: M9x1, M9x26, 3/8"x24, 3/8"x26, M10x1, M10x26, M12x1, M12x1.25, M12x1.5, M12x1.75, M14x1.5, M15x1, M15x1.5 - The self-centering axle measurement channel makes axle length measurements a breeze - Made in the USA
$125.00
- Bottom bracket and bearing installation kit - (1) 1/2" rod, (2) threaded handles - (1) 2237 OPEN BORE, (2) 2437 OPEN BORE, (2) 29mm OPEN BORE, (2) 6806 OPEN BORE, (1) FRAME DRIFT
$170.00
- Essential bottom bracket bearing extractor set - (1) 6806 extractor, (1) 24x37 extractor, (1) 29 DUB extractor, (1) 22mm GXP extractor
$47.25
BB30 service kit for SRAM DUB cranks. - Includes (2) Enduro 6806/29 ABEC-3 sealed bearings and 2 retaining clips - Bearing Dimensions: OD: 42mm / ID: 29mm / Width: 7mm - Enduro ABEC-3 bearings - Use with SRAM DUB cranks Note: SRAM DUB cranksets are not designed to work in 68mm or 73mm wide shells with inboard bearings. Use only if your frame is a direct-fit bearing system, and the BB shell width is 86.5mm or wider.
$75.00
- Essential bearing press for installation of bearings with a 10mm minimum ID - (1) 3/8 ACME threaded rod, (2) 30mm standoffs, (2) threaded handles
$299.00
- Press set for common frame and through axle hub bearing sizes - See wheelsmfg.com for full list of contents
$39.50
- Machined to match manufacturer specifications and designed to be used with a ½” drive socket or torque wrench for easy installation and removal of e-bike lockrings. - Precision machined aluminum body. - Anodized in Wheels MFG red.
$47.00
- Machined to match manufacturer specifications and designed to be used with a 1/2" drive socket or torque wrench for easy installation and removal of e-bike lockrings. - Precision machined aluminum body. - Anodized in Wheels MFG red.
$18.50
Designed to press in all current wheels mfg bottom brackets! our universal bottom bracket frame drift is designed to press all current wheels mfg bottom bracket cups in to your frame. The adapter is machined with multiple steps to fit common bottom bracket shell inside diameters listed in the compatibility tab below. Each step is laser etched with the diameter size. Drift can also can be used as a frame bottom bracket shell sizing guide! - Inner hole sized to fit 1/2" threaded rod. (Not for use with our Press-1 or Press-4 ) - Compatible with any other press with a 1/2" diameter rod - Recommended for use with Wheels Mfg BP0006, BP0007 - Machined aluminum - Anodized red - Sold individually We do not recommend it for use with press with a rod diameter less than 1/2". When used with a smaller rod, it is almost impossible to prevent the cups or bearings from pressing in straight.
$26.25
The Bottom Bracket Gauge Tool was designed to provide all the necessary measurements to identify the proper bottom bracket for a specific bike configuration. A metric scale runs along the long edges for measuring bottom bracket shell width and crank spindle lengths. Durable red anodized aluminum with laser etching. Overall size is 7" x 3" x 0.125". The gauge can measure: - bottom bracket width - bottom bracket shell inner diameter - crank spindle length - crank spindle diameter - bearing inner diameter Specifications: Measures crank spindle diameters: 22mm, 24mm, 29mm, 30mm Measures bearing inner diameters: 22mm, 24mm, 29mm, 30mm Measures bottom bracket shell inner diameters: 37mm, 41mm, 42mm, 46mm Measures bottom bracket shell widths: 61mm, 68mm, 73mm, 79mm, 86.5mm, 90mm, 92mm, 95mm, 100mm, 120mm, and 132mm Measures crank spindle lengths up to 180mm
$211.00
Complete tool kit for installing wheels manufacturing bottom brackets. Kit includes our new bottom bracket socket tool for installing our BB cups, along with new sealed bearing drifts for the following ID bearings: - 22mm - 24mm - 29mm - 30mm Bottom bracket press pro install kit includes: - UNC 48mm 16-notch socket x 1 - 22x37 drift 1/2" x 1 - 6806 OB 1/2" x 2 - 24x37 OB 1/2" x2 - 1/2" frame drift x 1 1/2-13 x 9. 7" - threaded rod unc x 1 44-48. 5mm - double 16-notch 1/2" socket x 1 - threaded handle x 2
$62.50
Use this double-sided socket tool for installing and removing both 48.5mm and 44mm 16-notch bottom bracket cups. Socket is machined for 1/2-inch drive, but a 3/8-inch to 1/2-inch adapter is included so you can use it with 3/8-inch drive torque wrenches. - Compatible with all Wheels Manufacturing bottom brackets that have 48.5mm or 44mm, 16-notch spline patterns - Also compatible with FSA MegaEVO BB cups, Shimano, SRAM/Truvativ, Campagnolo Ultra Torque, and FSA - Machined 6061 aluminum - Anodized red
$74.50
Easy-to-use tool removes and installs replacement bushings in suspension and shock pivots. Includes retaining tool, top cap, and three sizes of bushing drifts. - Fits eyelet sizes - 10mm, 12mm, and 1/2" - Machined aluminum - Anodized Red
$39.00
This Wheels Mfg. Double End Bottom Bracket wrench fits 16-notch bearing cups with an outside diameter of 44mm as well as 16-notch bearing cups with an outside diameter of 48.5mm. - Machined aluminum - Anodized red. - Compatible with all current Wheels Mfg bottom brackets with notched cups
$204.00
- Drift and over axle set for common thru axle hube and frame bearings - For use with 3/8" press rod - See wheelsmfg.com for full list of contents
$197.00
- Drift and over axle set for less common thru axle hube and frame bearings - For use with 3/8" press rod - See wheelsmfg.com for full list of contents
$70.00
The dropout saver system is an alternative to replacing badly bent or damaged derailleur dropouts. Rather than replacing the damaged dropout completely, simply drill out the damaged threads, install a dropout saver, and realign the dropout. Kit includes: - (1) 15/32-inch reduced shank drill bit - (2) DS-1 wide dropout savers     - (3) DS-2 narrow dropout savers    
$13.00
Precision-machined anodized aluminum designed to allow for easy adjustment of the Fox DHX2/FLOAT X2 shocks requiring a 3mm and 6mm hex wrench. This small, pocket-sized tool allows for easy trail-side adjustments.
$9.50
Our GXP-LEFT open bore adapter is used to press 22x37 sealed bearings into SRAM GXP bottom bracket cups and direct fit frames like trek BB90. The adapter is machined with one step at 22mm OD, which fits into the center of the sealed bearing. - Installs: 22x37 (GXP) bearing - Inner step outer diameter: 21. 9mm - Outer diameter: 36. 8mm - Thickness: 7mm - Thru hole diameter: 0. 387" (9. 8mm) - Inner hole sized to fit 1/2" ACME threaded rod - Compatible with BP0006, BP0007 - Machined, red anodized aluminum - Sold individually
$52.50
- Headset drift for sealed bearing installation press - Drift is machined with steps to press in headset cups that use either 1-1/8" or 1-1/2" bearings, but may be used for other cups with odd-sized sealed bearings - Compatible with bearing presses using 1/2" diameter rod, such as Wheels Mfg Headset Cup Press (PRESS-8)
$187.00
The Headset Press Pro Install Kit is a robust, and easy to use tool. The kit includes a machined aluminum handle, 1/2" threaded rod, two machined aluminum drifts and the adjustable press stop allowing for easy drift placement. One drift is machined with multiple steps to fit common head tube inner diameters listed in the compatibility tab below. The other drift has two sizes to press in cups with either 1-1/8" or 1-1/2" bearings. - machined aluminum handle and drifts - red anodized drifts and handles - zinc-plated 1/2" diameter threaded rod - long threaded rod works with long head tubes up to 250mm includes - 1 head tube drift includes - 1 headset cup drift - 1 adjustable press stop - 1 threaded handle includes on 1/2"-13x17" unc threaded rod
$160.00
- Bearing extractor set for small bearings - (1) 608, (1) 609, (1) 6000, (1) 6001
$174.00
Another indispensable tool for the professional bike shop. The hub bearing press pro kit works with bearings that have an i. D. Of 10mm or smaller (most front hub sealed bearing fall in this range). Installs sealed bearing sizes : - 6801 - 6802 - 6803 - 6900 - 6901 - R6 - 688 - 608 - 609 All parts are laser etched for easy identification. Formally press-2 includes: - 608 open bore 5mm x 2 - 608 over axel 5mm x 2 - 609 open bore 5mm x 2 - 609 over axel 5mm x 2 - 688 open bore 5mm x 2 - 688 over axel 5mm x 2 - 6801 open bore 5mm x 2 - 6801 over axel 5mm x 2 - 6802 open bore 5mm x 2 - 6802 over axel 5mm x 2 - 6803 open bore 5mm x 2 - 6803 over axel 5mm x 2 - 6900 open bore 5mm x 2 - 6900 over axel 5mm x 2 - 6901 open bore 5mm x 2 - 6901 over axel 5mm x 2 - R6 over axel 5mm x 2 - Rear QR skewer All parts are laser etched for easy identification.
$25.00
- Heavy duty double-ended steel lockring wrench - 10.5" long for plenty of leverage, fits most bottom bracket lockrings
$9.50
Wheels Manufacturing open bore adapters are used to press sealed cartridge bearings into place. The adapters are machined with one step to correspond to the bearing OD, which fits in to the center of the sealed bearing and an outside diameter to accommodate the bearing's outer diameter. Size: [Bearing inner diameter] x [Bearing outer diameter] Note: If only one dimension is given, that is the outer diameter of the adapter, with no inner diameter step
$9.50
Wheels Manufacturing Over Axle Adapters are used for pressing your most commonly used bearing sizes into place. Each represents an excellent addition to the Press-4 Bearing Press. - Adapters sold individually
$49.55
- Machined to match manufacturer specifications and designed to be used with a ½” drive socket or torque wrench for easy installation and removal of e-bike lockrings. - Precision machined aluminum body. - Anodized in Wheels MFG red.
$44.99
- These sockets have a machined 3/8" drive, which can be used to allow 3/8" drive torque wrenches to be attached and locks onto 1/2 inch UNC press rod for secure and easy installation of thin flanged bottom brackets - Machined 6061 aluminum in anodized red - Made in the USA
$55.00
- Similar to its big brother but at a fraction of the size. The new and more efficient Adjustable Press Stop Mini will make life easier for mechanics as it allows for quick and accurate positioning in places where space is tight at the press of a button. - Adjustable Press Stop slides along 3/8" ACME threaded press rod when the button is depressed and can be placed quickly to secure drifts, spacers, and cups when completing maintenance or installation of bike headsets, bottom brackets, and bearings. - Compatible with new and existing Wheels MFG press kits which utilize a 3/8" ACME threaded rod - Compatible kits include: Press-4, ST0006, Press-1 - Machined aluminum body - Anodized in Wheels MFG red. - Durable steel button - For use with 3/8" ACME threaded press rod (Sold Separately)
$39.95
Wheels Manufacturing Sealed Bearing Extractor - 10mm Fits the following bearings: - 6000 - 6200 - 6800 - 6900
$39.95
Wheels Manufacturing Sealed Bearing Extractor - 12mm Fits the following bearings: - 6001 - 6801 - 6901
$39.95
Wheels Manufacturing Sealed Bearing Extractor - 15mm Fits the following bearings: - 6002 - 6702 - 6802 - 6902 - 15267 - 15268
$39.95
Wheels Manufacturing Sealed Bearing Extractor - 17mm Fits the following bearings: - 6003 - 6803 - 6903 - 17287
$41.50
Wheels Manufacturing Sealed Bearing Extractor - 10mm Fits the following bearings: - 6704 - 6804 - 6904
$39.95
Wheels Manufacturing Sealed Bearing Extractor - 8mm Fits: - 608 - 688 - Other bearings with an inside diameter of 8mm
Page 1 of 13 Next page