Tools
$9.00
The 45NRTH stud insertion tool seats and removes the stud from the stud pocket. Customize your stud tread pattern or replace missing studs. Works with all 45NRTH studdable and studded products.
- Tire studs sold separately
- POM-injected handle
- Stainless steel barrel
- Thumb and index finger grips for more comfort and control
- Compatible with studs that have a 3.5mm or smaller shaft
$4.00
Designed to fit snugly between the disc brake caliper pistons or pads, preventing inward pad movement to preserve hydraulic brake adjustment while the wheel is off the bike..
- For disc caliper repair
- Fits SRAM Guide, Trail, and Avid Code Brakes
$64.00
Essential parts to properly service and maintain all Avid CODE brakes.
- Replacement parts for 2007-2010 CODE brakes
- Includes bearings, bearing press tool, pivot bolt, cam, cam spring, and lever
$47.00
- Designed specifically to install and/or remove Campagnolo Ultra-Torque bottom bracket cups
- Allows use of a Torque wrench to obtain proper torque specifications
$214.00
Campagnolo UT-CN400 Chain Tool.
- Used to install 12-speed and 13-speed Campagnolo chains
$272.00
- 11 speed compatible
- Allows removal, installation and peening of rivets
$19.00
When you are installing headset cups into your bicycle frame or a crown race onto your fork, there is only one way to get the job done right. Use an appropriately-sized Cane Creek installation tool, or risk damaging your frame and/or fork. The headset cup installation tools are designed to be used with a headset press, sold separately.
$31.00
Service tools to ensure long-term success of Chris King hubs.
- For use in bearing preload adjustments on all Chris King front and rear hubs
$203.04
Service tools to ensure long-term success of Chris King hubs.
- For intensive servicing of Ringdrive system found in most Chris King rear hubs
- Included: Hub Cone Adjusting Tool, Cog Spline Wrench, Spline Driver, Driveshell Bushing Tool, and Service Manual
- Does not fit R-45 model hubs. See TL7829 for proper tool fitting R-45 hubs
$7.99
Crank Brothers puts their well-known design aesthetic to the humble tire lever with the Speedier Lever. Can we call a single piece of nylon revolutionary? First off, this thing is tough. It removes and installs wire-beaded DH tires, UST tires, and brand-new road tires easily, without breaking. The genius loop protects your knuckles! It installs tires too, without pinching the tube, just flip it and use the other side. And only one lever is needed to remove even the most recalcitrant tires. Oh Speedier Lever, where have you been all my life?
$12.99
The ultimate trailside companion. This high-tensile steel multi-tool features a precise fit and finish and side grips for a secure handhold even with gloves on. The M5 includes:
Hex wrenches: #3, 4, 5, 6
Screwdrivers: Phillips #2
Length: 89mm
Weight: 85g
Warranty: Lifetime
$19.99
The ultimate trailside companion.
These high tensile steel multi-tools feature a precise fit and finish and side grips for a secure handhold even with gloves on.
The m10 includes:
Hex wrenches: #2, 2.5, 3, 4, 5, 6, 8
Screwdrivers: Phillips #2, flat #2
Torx: t-25
Length: 89 mm
Weight: 124g
Warranty: Lifetime
$25.99
The ultimate trail-side companion.
Details
- 13 high tensile steel multi-tools, including an integrated tire plug tool
- Tire plugs come included with a storage case that mounts directly to the tool
- The case can be used to conveniently store chain links
Specs
- Hex Wrenches: #2, 2.5, 3, 4, 5, 6, 8
- Length: 89mm
- Screw Drivers: Phillips #1 & #2, flat #1
- Specialty Tools: Tire plug tool, tire plugs
- Torx: T-10, T-25
- Warranty: Lifetime
- Weight: 164g
$29.99
Tubeless tire plug kit plus CO2 head.
- Tire plug tool
- Tire plugs
- CO2 head
- Storage case
- Mounting bracket
- 5 year warranty
$29.99
The ultimate trailside companion.
These high tensile steel multi-tools feature a precise fit and finish and side grips for a secure handhold even with gloves on.
The m17 includes:
Chain tool: 8/9/10 speed compatible
Spoke wrench: #0, 1, 2, 3
Hex wrenches: #2, 2.5, 3, 4, 5, 6, 8
Open wrench: 8mm, 10mm
Screwdrivers: Phillips #2, flat #2
Torx: t-25
Length: 89 mm
Weight: 168g
Warranty: Lifetime
$33.99
The ultimate trailside companion.
These high tensile steel multi-tools feature a precise fit and finish and side grips for a secure handhold even with gloves on.
The m19 includes:
- Chain tool: 8/9/10 speed compatible
- Spoke wrench: #0, 1, 2, 3
- Hex wrenches: #2, 2.5, 3, 4, 5, 6, 8
- Open wrench: 8mm, 10mm
- Screwdrivers: Phillips #1, Phillips #2, flat #2
- Torx: t-10, t-25
- Stainless steel carrying case
- Length: 89 mm
- Weight: 175g
- Warranty: lifetime
$34.99
Thin, light and minimalist design.
- 5-year warranty
- Hex wrenches : 2, 2.5, 3, 4, 5, 6, 8mm
- Screwdrivers : Phillips #2, flat #2
- Torx : t-25
- Magnetized storage case can be used as a handle for extra leverage
- 5-year warranty
$39.99
The ultimate trail-side companion.
Details
- 20 high tensile steel multi-tools, including an integrated tire plug tool
- Tire plugs come included with a storage case that mounts directly to the tool
- The case can be used to conveniently store chain links
Specs
- Chain Tool: 8/9/10/11/12 speed compatible
- Hex Wrenches: #2, 2.5, 3, 4, 5, 6, 8
- Length: 89mm
- Open Wrench: 8mm
- Screw Drivers: Phillips #1 & #2, flat #1
- Specialty Tools: Tire plug tool, tire plugs, valve core removal tool, rotor straightener
- Spoke Wrench: #0, 1, 2
- Torx: T-10, T-25
- Warranty: Lifetime
- Weight: 203g
$42.99
Thin, light and minimalist design.
- 5-year warranty
- Hex wrenches : 2, 2.5, 3, 4, 5, 6, 8mm
- Screwdrivers : Phillips #2, flat #2
- Torx : t-25
- 8-12 speed chain tool is incorporated into the case
- Spoke wrench : #0, 1, 2 & 3
- Magnetized storage case can be used as a handle for extra leverage
$49.99
- 11 different tools housed in a composite storage case
- Plug tool and plugs
- 2, 2.5, 3, 4, 5, 6, 8mm hex wrenches
- Torx T25
- Phillips #1 & flat screwdrivers
- Bottle opener
$59.99
- 16 different tools housed in a composite storage case
- Plug tool and plugs
- Case features an 8-12sp chain tool and doubles as a handle for extra leverage
- 2, 2.5, 3, 4, 5, 6, 8mm hex wrenches
- Torx T25
- Phillips #1 & flat screwdrivers
- #0, 1, 2 & 3 spoke wrenches
- Bottle opener
$20.00
The Bead Dropper tire tool significantly helps in removal and installation of CushCore tire inserts, especially the critical step of dropping the bead into the rim channel.
- Rubberized ergonomic handle
- Unique "thumb flange" makes it easy to apply pressure to the tire bead
- Sturdy, durable plastic lever—strong enough for DH tires, yet won't scratch your rims
- Lifetime warranty
$120.00
The Ultimate Tire Lever.
The Bead Dropper tire tool significantly helps in removal and installation of CushCore tire inserts. Especially the critical step of dropping the bead into the rim channel.
Rubberized ergonomic handle – the most comfortable tire lever you’ll ever use
Unique “thumb flange” makes it easy to apply pressure to the tire bead
Sturdy, durable plastic lever – strong enough for DH tires, yet won’t scratch your rims
$16.00
- Professional wrenches fit internal nipples on many deep section aero rims
$17.50
- Slotted construction for securing Aerolite bladed spokes
- Helps prevent spoke twisting while wheel building/truing
- Red handle for 0.8-1.0mm spokes
- Black handle for 1.0-1.3mm spokes
$18.30
DT Swiss spoke wrenches for repairing all types of DT Swiss wheels.
- Multi-tool for DT aero spokes, torx, and square nipples
$27.60
DT Swiss spoke wrenches for repairing all types of DT Swiss wheels.
- Works with Torx-style nipples found on DT Swiss Tricon Wheels
- This professional tool is designed for a precise fit and prevents rounding of nipples
- Metal nipple interface contacts torx nipple on all surfaces
$34.00
DT Swiss spoke wrenches for repairing all types of DT Swiss wheels.
- This professional tool is designed for precise fit and prevents rounding of nipples
- Metal nipple interface contacts nipple on all four surfaces
- Fits 3.25mm square nipple interface
$36.50
Tools for working with DT Swiss spokes.
- Punch with concave head
- Improves seating of the spoke head in the hub flange
$65.40
- All the tools you will need to disassemble and reassemble DT Swiss ratchet and 3 pawl hubs
$72.30
- All the tools you will need to disassemble and reassemble DT Swiss ratchet and 3 pawl hubs
$77.30
Tools for working with DT Swiss spokes.
- Special for stainless spokes
$81.80 - $99.90
Squorx nipple drivers for wheelbuilding and servicing DT wheels with Squorx nipples (Spline One).
$109.10
Developed for locking the nipple to the spoke during the wheel-building process, preventing the spoke-nipple connection from loosening.
- Holds nipples in place but allows for up to 5 adjustments before compound breaks down
- Use with light oil for a secure, re-trueable wheel or use by itself for a maximum bond
- Developed in conjunction with Loctite
- Includes two 10ml bottles
$232.10
- All the tools you will need to disassemble and reassemble DT Swiss ratchet and 3 pawl hubs
$33.00
- Installation wrench for all Enduro TorqTite Bottom Brackets
- Some TorqTite installations require two wrenches
$29.95
The Ergon TP1 Pedal Cleat Tool is the first tool for precisely and easily adjusting cycling shoes cleats. The ergonomically correct position of the feet on the pedals plays a crucial role in injury prevention and is also important for maximizing both performance and comfort.
$6.99
- Gel contains non-Abrasive plastic beads that provide increased surface friction
- Allows for reduced clamping force, prevents crushing of expensive carbon parts (Brake lever/Bar, Bar/Stem, Stem/Steerer, Seatpost/Frame, Etc)
- Prevents corrosion/scuffing and quiets creaking noises
- Can also be used on non-carbon parts where an increase in clamping friction and/or a reduction in clamping force is desired
- Always follow the manufacturer's torque specifications when clamping carbon parts
$24.99
- Stainless steel measurement tool has gauges for all current headset bearing standards (Campagnolo, Cane creek, TH/FSA)
- Includes inside gauges for headtubes and cups and outside gauges for bearings
$9.00
The majority of bicycle maintenance is precision work, and the Dual-Sided Pick takes things to a whole new level. Ideal for removing debris from tires and brake pads, mud and grit from pedals and cleats, grabbing cartridge bearing and suspension seals, or managing any number of other detail work procedures. The overmolded, file-tread grip provides excellent grip and excellent control. The in-line and angled arm shapes are complimentary for intricate work. Available separate, or found in our Team Edition Tool Kit.
- Hardened CRV tool steel shafts resist bending under stress
- In-line and 90-degree arm shapes combine to simplify countless precision applications
- Overmolded ergonomic file tread grip prevents hand fatigue and promotes excellent control
- Ideal for removing unwanted debris from bike accessories and components
$10.00
Because you love your bikes, when you’re not riding them you’re washing them, tuning them, or traveling to exquisite ride destinations. The Thru-Axle Chain Keeper is an ideal solution for keeping your bike chain secure during bike washing, tune-ups, and traveling. This elegant, lightweight, bio-based plastic design fits perfectly on the axles of 12mm thru-axle dropout systems, no tools required. By keeping chain tension with the Thru-Axle Chain Keeper, you can be confident your bike is safe during drivetrain cleaning or travel.
Features:
- Protects rear derailleur by maintaining chain tension when the rear wheel is removed.
- Ideal bike service tool for washing, tune-ups, and traveling.
- Accommodates road bikes, cyclocross bikes, mountain bikes, electric bikes, fitness bikes, and more.
- Fits 12mm Thru-Axle dropouts.
- Prevents the chain from slapping against delicate and painted frame surfaces.
- High-density, solvent-resistant, Bio-based PA56 roller is easy on your chain, yet incredibly durable.
- CNC machined aluminum body is corrosion-resistant and comfortable in-hand.
- Tool-free, easy-install design makes use simple and effective for beginner or professional bike mechanics.
- SAG Sustainability Action Group approved – bio-based material, low packaging volume, and mono-material for easy recycling.
$12.00
If there ever was an underrated tool that you probably don’t have in your bike tool kit, it has to be the Valve Core Wrench. Designed to remove or install Presta Valve and Schrader Valve cores, this tiny tool can truly make the process of installing or refilling flat-prevention liquids and gels quick and painless. The versatility of the valve stem tool supports both valve types found on mountain bikes, road bike, commuting and electric bikes – never be stranded on your commute thanks to the Valve Core Wrench. Available separate, or found in our Team Edition and Ride Prep Tool Kits.
- Fits Presta Valve and Schrader Valve bike tubes
- File tread grip creates a comfortable and ergonomic grip
- CRV tool steel metal core makes this a one-time purchase
- Aides in the overhaul of suspension forks and rear suspension shocks
- Found in our Ride Prep and Team Edition Tool Kits
- Limited Lifetime Warranty
$12.50
Bicycle maintenance is often delicate, precision work. Having an ergonomic allen wrench set or torx bit set in the palm of your hand is an ideal resource for any mechanic. With these tools alone, installing bike accessories or making component adjustments is quick and simple. Available individually, or find them in our Team Edition and Ride Prep Tool Kits.
- 2 / 2.5 / 3mm Allen wrench set
- Ergonomic, overmolded rubber grip for comfort and precision
- Durable polymer core creates a flex-free platform for confidently turning tight bolts
- Hardened CRV tool steel maintains precise contact edges
- Suitable for low and high torque adjustments on bicycle-specific components
- Limited Lifetime Warranty
$13.50
Bicycle maintenance is often delicate, precision work. Having an ergonomic allen wrench set or torx bit set in the palm of your hand is an ideal resource for any mechanic. With these tools alone, installing bike accessories or making component adjustments is quick and simple. Available individually, or find them in our Team Edition and Ride Prep Tool Kits.
- 4 / 5 / 6mm Allen key set
- Ergonomic, overmolded rubber grip for comfort and precision
- Durable polymer core creates a flex-free platform for confidently turning tight bolts
- Hardened CRV tool steel maintains precise contact edges
- Suitable for low and high torque adjustments on bicycle-specific components
- Found in our Team Edition and Ride Prep Tool Kits
- Limited Lifetime Warranty
$14.00
Bicycle maintenance is often delicate, precision work. Having an ergonomic Allen wrench set or Torx bit set in the palm of your hand is an ideal resource for any mechanic. With these tools alone, installing bike accessories or making component adjustments is quick and simple. Available individually, or find them in our Team Edition and Ride Prep Tool Kits.
- T25 / T27 / T30 Torx bit set
- Ergonomic, overmolded rubber grip for comfort and precision
- Durable polymer core creates a flex-free platform for confidently turning tight bolts
- Hardened CRV tool steel maintains precise contact edges
- Suitable for low and high torque adjustments on bicycle-specific components
- Limited Lifetime Warranty
$14.00 - $15.00
The majority of bicycle maintenance is delicate, precision work. But occasionally, getting the job done requires maximum leverage and control. The 8 and 10mm L-Handle Allen Wrench Tools are designed to create optimal torque for pedals and cranks. With an extra deep contact arm, long lever arm and ergonomic handle, having great control during high-torque moments is reassuring. These Allen wrenches also have a convenient ball end for quick turns of a bolt.
$14.00
The perfect ride-saver that’s so compact you’ll forget you’re carrying…until you need it. This CNC machined, 4-in-1 spoke wrench and valve extender tool can restore a wheel knocked out of true, and change a valve extender during a flat repair. And while you hopefully never need to use it, the Spoke Wrench is one of those tools you ‘ll be glad you had if the situation arises. Available separate, or find it in our Team Edition and Ride Prep Tool Kits.
- 4-in-1: 3 spoke nipple tools and 1 valve extender tool
- 3.23mm (0.127?) slot fits many DT Swiss, Marwi, Edco and Wheelsmith square nipples
- 3.3mm (0.130?) slot fits 15G square nipples
- 3.45mm (0.136?) slot fits 14G square nipples
- Fits the standard for valve extenders on long-valve presta inner tubes and tubeless presta valve wheels
- Hardened CRV tool steel maintains precision edges for a lifetime
- Found in our Ride Prep and Team Edition Tool Kits
- Limited Lifetime Warranty
$14.00 - $24.00
The T-Handle Allen Wrench collection is the premier choice of the most demanding mechanics for precision hex keys. Made from S2 steel, known for it’s hardness and durability, these T-Handles will last you a lifetime – guaranteed. Conveniently, these Allen keys can also be added to the Team Edition Tool Kit for the ultimate portable service kit.
$15.00
Eliminate brake pad and rotor rubbing by using our updated Rotor Truing Fork 2.0 to keep any brake rotor perfectly true. Compact, portable, and lightweight, yet comfortable and effective to use thanks to the strong steel core and overmolded grip. With two different tuning depths for repairing shallow and sharp deformations, this is the ideal solution for truing disc brakes on road bikes, mountain bikes, electric bikes, urban and ?tness bikes.
$15.00
Our Steel Core Tire Levers have a hardened CRV tool steel center to prevent flex and breakage. And when getting your tire off is an extra big chore, each lever has a spoke attachment to help you get maximum leverage and secure removal. Add to this an additional polymer tab to properly spread hydraulic disc brake pads and you have a true roadside or trailside 2-in-1 companion. Our Steel Core Tire Levers make inferior tire removal tools a thing of the past. Available separate, or found in our Ride Prep and Team Edition Tool Kits.
- Hardened CRV tool steel core prevents flex and breakage
- Spoke hook on each lever
- High-density polymer protects your rim and promotes smooth tire bead removal
- Thin-bladed tip maneuvers under even the tightest tire bead
- Wide and reinforced body promotes confidence even with the most challenging tires
- Extra-long polymer tab to properly spread hydraulic disc brake pads
- Slide-fit system keeps the tire tool pair securely together
- Found in our Ride Prep and Team Edition Tool Kits
$22.00
Disc brakes are arguably the most beneficial update in modern bicycle design, but not when disc rotors rub against the brake pad. Let there be flawless, flush contact, and zero pad and rotor rubbing by using this forged, hardened and polished steel Rotor Truing Fork to keep a perfectly true rotor. With two different tuning depths for repairing shallow and sharp deformations, this is the ideal solution for road disc brakes, mountain bikes, electric bikes, urban and fitness bikes. Available separate, or find it in our Team Edition and Ride Prep Tool Kits.
- Forged, hardened CRV tool steel
- Two different tuning depths for precision truing of disc brake rotors
- Angled design promotes ample spoke clearance and efficient leverage
- Polished finish looks good for the life of the tool
- Precision 2.0mm slots fit Shimano, SRAM and other major rotor brands
- Found in our Team Edition and Ride Prep Tool Kits
- Works great with the Pro Truing Station rotor alignment gauge
$27.50
All Feedback Sports repair stands are designed to be excellent at home and excel in the field. The Flop Stop is a clever service upgrade for the most demanding and home bike mechanics alike. The Flop Stop is an adjustable solution to keep your handlebar position static while you manage detailed bike maintenance like brake bleeds, handlebar wrapping, and full assembly, to name just a few. This handlebar holder also works great when storing road bikes, fitness bikes, mountain bikes, and e-bikes to keep the front wheel straight.
Page 1 of 13
Next page