Parts

Vendor Part # FK-6665

- Integrated lower headset for 1.5" or tapered steerers - 36° x 45°

The RX4+ caliper supersedes the RX4 caliper and builds on 25 years’ experience designing and manufacturing hydraulic disc brakes and transfers the knowledge and skills acquired into the world of Road and Cyclocross dropbar brakes. A precision CNC machined monobloc design results in a stiffer caliper to give unrivalled feel and modulation. KEY FEATURES - Dot Fluid Calipers will have Bore Caps with a D etched. - Mineral Oil Caliper will have Bore Caps with an M etched. - Calipers to suit dropbar set ups - Flat Mount front & rear & Post Mount - Calipers designed to fit 140, 160 & 180mm rotors - Slimline 4 piston lightweight design - Monobloc design creates a stiffer caliper reducing the fuzzy lever feel and brake pad rub - Available in Black, Silver, Bronze, Red, Blue, Purple and Orange - Top entry pad fitting - CNC machined from 2014 T6 aluminium ***Please note*** Shimano and SRAM brands belong to a third party and have no relation with Hope Technology RX4+ Caliper is designed to work with Shimano and Campagnolo dropbar brake systems (Mineral Oil, Shimano recommended for Shimano application, Campagnolo/Magura recommended for Campagnolo) Shimano Compatible Calipers (RX4+) Dura Ace Di2 R9270 / R9170 / R9120 / R9200 Ultegra Di2 R8170 / R8100 / R8070 / R8170 / R8020 / 105 Di2 R7170 / R7020 / Di2 R785 / RS685 / GRX RX820 / RX810 / RX600 / RX400 / RX815 Di2 / RX817 Di2 Campagnolo Compatible Calipers (RX4+) Ekar / Super Record / Record / Campagnolo H11 SRAM Compatible Calipers (RX4+) dropbar brake systems (Dot Fluid) Sram Red eTap AXS / Sram Red / Sram Force eTap AXS / Sram Force / Sram Rival eTap AXS / Sram Rival / Sram Apex / Sram S900

Brake pads include spring clip and pin Brake pads are dyno tested in-house in Barnoldswick Available for all our current brakes and older models All pads are rigourously tested by us and our Pro riders to ensure maximum performance and longevity We keep a wide range of pads to suit all our brakes

- Eten-I rounds out the lower end of the KS internally routed dropper post spectrum with a post that is perfect for new riders just getting used to the idea of on-the-fly seat height adjustment or more experienced riders looking for a value-priced solution. - Eten-I uses the same head and cartridge as the Eten Remote but moves the cable interface to the bottom of the post for compatibility with frames accommodating internally routed cables.

CNC machined 6061 aluminum Black anodized finish For Orbea 2020+ MTB frames with 12mm thru-axle. Includes fixing ring. Orbea: Hanger # 50/X160 Orbea Occam - 2020+ Rise - 2020+ Wild - 2020+

Hope Pad Clip - Fits Tech and Tech Evo M4, X2, and V2 Brakes

RaceFace Crank Arm Fixing Bolts - M15

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Shim Ring: for Star Ratchet Hubs with 26mm OD Driveside Bearings

- Aheadset preload adjusting bolt

Replacement small parts for Hope disc brake Hope disc brake calipers.

Hope Brake Lever Parts

Internally fitting service parts for Hayes hydraulic disc brake master cylinders. - All HFX-MAG compatible master cylinder internals are designed for the current aluminum piston/2mm push-rod platform (2003 and newer).

Service parts for Fox suspension.

Looking to get a little extra distance so that your derailleur clears your 40 or 42 tooth cog? Look no further. - M4 x 24mm screw for that extra little push

KMC 3/16" Master Link Chain Links - For 3/16" chain, extra wide - Extra-wide, for non-derailleur bikes: BMX, cruisers, etc - Perfectly fits on KMC 415H & 415H-NP chains

- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool

KS Dropper Post Service Parts

Saddle clamp heads and lowers for KS Dropper posts.

Saddle clamp heads and lowers for KS Dropper posts.

Hope Disc Brake Hose Small Parts · This washer fits on both sides of the banjo bolt and seals the hose fitting into the master cylinder

Replacement copper washers for 5mm or stainless Hope hydraulic brake line.

Replacement end plugs for the GA2, GA2 Fat, and GA3 grip models. - One size. - Sold as a pair. - Fits Ergon GA2, GA2 Fat and GA3 models only. - Designed to fit Trail / All-Mountain MTB handlebars on the market today.

Replacement right and left Ergon logo bar plugs. Features the Ergon logo in a vibrant white color. You have the choice of a plug set of the barend and non-barend models - Right and Left soft plastic bar plugs. - Sold as a set only. - Fits most handlebars. - Can be trimmed to fit various handlebar thicknesses. - Plug set for GP and GS grips with barends - fits GP2, GP3, GP4, GP5, GS2 and GS3 models only - Plug set for GP1, GC1 and GS1 grips - fits GP1, GC1, and GS1 only

HFX-Mag/-9, El Camino, Stroker Caliper-Hose Connection Seal

FSA Mega Exo Small Parts.

FSA Mega Exo Small Parts.

Brass compression olive for Hope hydraulic disc brakes.

Parts for the service of the seal and restore the smooth cycling of KS dropper posts.

Replacement piston and seals for Hope disc brake calipers.