Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Cassettes/Freewheels

$7.99
Dimension Steel Cogs are splined for BMX and singlespeed hub compatibility. - Steel with chrome finish - Cogs are splined for Shimano BMX and singlespeed hub compatibility - Compatible with 1/2-inch and 1/8-inch chains
$10.79
- 3-spline steel cogs for use with Sturmey 3-speed (and 5-speed) internal gear rear hubs - Flat or dished for tuning chainline. Xylan coating for greater durability
$14.99 - $19.99
Problem Solvers Singlespeed 6-bolt Cogs are designed to be used with the Problem Solvers Cog Carrier. - Compatible with 3/32" and 1/8" chains - Cog is also 6-bolt rotor mount compatible for fixed gear use (see instructions for applicable warnings)
$18.00
SRAM's PG-730 7-Speed Cassette is the perfect replacement for your worn-out gears. It features a rugged steel construction for awesome durability and SRAM's PowerGlide technology for smooth, precise shifts throughout its 12-32 tooth range.
$18.99
MicroSHIFT's 7-speed cassettes are nickel plated for durability and constructed using the same processes as microSHIFT's higher-end cassettes, resulting in rapid, responsive shifting at an affordable price. - Nickel plated - Continuously molded cogs are straighter than stamped steel, resulting in more consistent, predictable shifting performance - Precision ramps and chamfers for rapid chain movement - Compatible with SRAM and Shimano 7-speed systems - Steel lock ring - Cassette Cogs: 12-13-15-18-21-24-28
$19.00
SRAM's PowerGlide PG-820 Cassette is a fine 8-speed cassette. It features steel cogs with SRAM's DuraBlast technology for smooth, precision shifting and excellent durability.
$19.99
The Odyssey 13T freewheel threads on to the metric (small) side of a flip flop hub. - Freewheel Teeth: 13 - Cassette Body Type: Threaded Metric 30 x 1mm - Chain Compatibility: 1/2" x 1/8" - Weight: 113g
$20.99
These 8-speed cassettes are nickel plated for durability and constructed using the same processes as microSHIFT's higher-end cassettes, resulting in rapid, responsive shifting at an affordable price. - Nickel-plated - Continuously molded cogs are straighter than stamped steel, resulting in more consistent, predictable shifting performance - Precision ramps and chamfers for rapid chain movement - Compatible with SRAM and Shimano 8-speed systems - Steel lock ring Gear combinations: - 12-25T: 12-13-15-17-19-21-23-25 - 11-28T: 11-13-15-17-19-21-24-28 - 11-32T: 11-13-15-18-21-24-28-32 - 12-32T: 12-13-15-18-21-24-28-32 - 11-34T: 11-13-15-18-21-24-28-34
$20.99 - $21.99
These 9-speed cassettes are nickel plated for durability and constructed using the same processes as microSHIFT's higher-end cassettes, resulting in rapid, responsive shifting at an affordable price. - Nickel-plated - Continuously molded cogs are straighter than stamped steel, resulting in more consistent, predictable shifting performance - Precision ramps and chamfers for rapid chain movement - Compatible with SRAM and Shimano 9-speed systems - Steel lock ring Gear combinations: - 11-25T: 11-12-13-15-17-19-21-23-25 - 12-25T: 12-13-14-15-17-19-21-23-25 - 11-28T: 11-12-13-15-17-19-21-24-28 - 11-32T: 11-13-15-17-19-21-24-28-32 - 11-34T: 11-13-15-17-19-21-24-28-34 - 11-36T: 11-13-15-18-21-24-28-32-36
$21.00
SRAM's PowerGlide PG-830 Cassette is a quality 7-speed cassette. It boasts durable chrome-plated steel cogs with SRAM's shifting technology that includes optimal tooth profiles and ramps for fast, precision shifts every time.
$23.90
Turn any 8-10 speed HG-splined cassette hub into a 3/32-inch 16-tooth singlespeed.
$24.99 - $29.99
MicroSHIFT's H10 cassettes are manufactured to exacting tolerances for straightness, shift quality, and durability, resulting in responsive shifting performance that lasts longer than you might expect. - Sprockets are chrome-plated for hardness and corrosion resistance - Continuously molded cogs are straighter than stamped steel, resulting in more consistent, predictable shifting performance - Precision ramps and chamfers for rapid chain movement - Compatible with SRAM and Shimano 10-speed systems - Steel lock ring Gear combinations: - 11-25T: 11-12-13-14-15-17-19-21-23-25 - 11-28T: 11-12-13-14-15-17-19-21-24-28 - 11-32T: 11-12-13-15-17-19-21-24-28-32 - 11-34T: 11-12-13-15-17-19-21-24-28-34 - 11-36T: 11-13-15-17-19-21-24-28-32-36
$27.00 - $36.00
When it's time to replace your old 8-speed cassette, check out SRAM's PG-850. Its steel construction and SRAM's PowerGlide technology combine to deliver miles of solid shifting and outstanding durability.
$29.99 - $34.99
The Acolyte 8-speed cassette gives you all the range you need to challenge yourself.  Whether you’re climbing the Cascades or the neighborhood sledding hill, all you have to think about is where to put the bike – Acolyte will take care of the rest.  And yes, it works with a standard HG freehub body and a normal 8-speed chain.
$29.99
MicroSHIFT's H11 cassettes are manufactured to exacting tolerances for straightness, shift quality, and durability, resulting in responsive shifting performance that lasts longer than you might expect. - Continuously molded cogs are straighter than stamped steel, resulting in more consistent, predictable shifting performance - Precision ramps and chamfers for rapid chain movement - Compatible with SRAM and Shimano 11-speed systems - Steel lock ring - Chrome plated for hardness and corrosion resistance Gear combinations: - 11-25T: 11-12-13-14-15-16-17-19-21-23-25 - 11-28T: 11-12-13-14-15-16-17-19-21-24-28 - 11-32T: 11-12-13-14-15-17-19-21-24-28-32 - 11-42T: 11-13-15-17-19-21-24-28-32-36-42
$29.99
Problem Solvers Cog & Carrier adapts multi-speed Shimano HG freehubs for singlespeed use. - Wide-profile alloy cog carrier supports a single speed cog - 6-bolt chromoly cog included, compatible with 3/32" and 1/8" chains - Carrier is splined for Shimano HG freehub compatibility - Additional cogs available separately
$29.99
RS1 Cassettes are a great replacement for 10-speed road sytems. - Steel Spider - Cassette Body Type: Shimano/SRAM 8, 9, 10 Speed - Cassette Cogs: 11-12-13-14-15-17-19-21-24-28 - Drivetrain Speeds: 10 - Weight: 267 g
$34.00
No mixed messaging or compromises here. The GX DH cassette was built with only one purpose in mind—exploiting gravity to its fullest lap after lap. This downhill-optimized 7-speed cassette provides gear steps that give each shift more purpose, and its compact design allows more spoke clearance. It’s a full-on, dedicated SRAM 1x cassette for gravity that lets you keep some money for a lift ticket. GX DH—Get Some. - The PG-720 cassette is an integral part of the SRAM 1x DH drivetrain system - This is the most affordable full-featured, dedicated 1x DH cassette in the industry - Fewer cogs allow for a faster transition from starting cog to highest cog - More rear wheel clearance around spokes - Fully compatible with the SRAM X01 DH drivetrain - Splined driver body compatible - Weight: 224 grams - Gear-Ratio:11 – 25T - Speeds: 7 - Recommended Group: GX DH
$35.00
Pair this cog with your Shimano-compatible rear hub, spacers and a lockring (sold separately) and discover the joy and simplicity of a singlespeed without the cost of a new wheel. Machined from heat-treated chromoly and then chrome plated, these seriously tough cogs are strong, shiny and they come in sizes from 13T to 22T so you can pick the perfect gear.
$35.00
Machined from heat-treated, chrome-plated chromoly, these seriously tough cogs will hold up to massive track sprints and crazy skid-stops. Surly's Track Cogs are strong, shiny and they come in two widths and sizes from 13T to 22T so you can select the perfect gear.
$37.00
When it's time to replace your 9-speed cassette, check out SRAM's PG-950 cassette. It delivers solid shifting and durability ride in and ride out for your 9-speed rig.
$39.99
Dimension cassettes feature Shimano/SRAM compatible spacing, precise fitment for crisp shifting, and easy installation with standard tools. They're a perfect replacement for worn out cogs. Constructed of steel cogs and lock ring. Cassette Cogs: - 11 – 28T: 11-13-15-18-21-24-28 - 12 – 28T: 12-14-16-18-21-24-28 - 12 – 32T: 12-13-15-18-21-24-32
$39.99 - $44.99
Dimension cassettes feature Shimano/SRAM compatible spacing, precise fitment for crisp shifting, and easy installation with standard tools. They're a perfect replacement for worn out cogs. Constructed of steel cogs and lock ring. Cassette Cogs: - 11 – 28T: 11-12-14-16-18-21-24-28 - 11 – 32T: 11-12-14-16-18-21-26-32
$39.99
Dimension cassettes feature Shimano/SRAM compatible spacing, precise fitment for crisp shifting, and easy installation with standard tools. They're a perfect replacement for worn out cogs. Constructed of steel cogs and lock ring. Cassette Cogs: - 11 – 28T: 11-12-13-15-17-19-21-24-28 - 11 – 32T: 11-12-14-16-18-21-24-28-32 - 11 – 34T: 11-13-15-17-20-23-26-30-34
$39.99
When it comes to adventurous riding, a wider gear range is often better. With 9 speed and a 11-42T range, the ADVENT cassette has the low gears you need to get up and the high gears to get back down. The steps between gears are optimized to give an even spread in gear ratios, reducing the need for double-shifting to find the right gear. - Machined aluminum large cog for reduced weight - Carbon steel cogs are continuously forged for strength and shifting accuracy - Compatible with standard freehub bodies - Surface Finish: ED Black / Anodized Black - Combination: 11-13-15-18-21-24-28-34-42
$40.99 - $45.99
CS-G100 cassettes combine microSHIFT's continuously molded cogs with a CNC machined aluminum spider to deliver rapid, precise shifting at a lower weight. - Continuously molded cogs are straighter than stamped steel, resulting in more consistent shifting performance from cassette to cassette - CNC machined aluminum alloy spider carrier saves weight - Sprockets are chrome-plated for hardness and corrosion resistance - Precision ramps and chamfers for rapid chain movement - Compatible with SRAM and Shimano 10-speed systems - Aluminum lock ring Gear combinations: - 11-25T: 11-12-13-14-15-17-19-21-23-25 - 11-28T: 11-12-13-14-15-17-19-21-24-28 - 11-36T: 11-13-15-17-19-21-24-28-32-36
$42.99
CS-G110 cassettes combine microSHIFT's continuously molded cogs with a CNC machined aluminum spider to deliver rapid, precise shifting at a lower weight. - Continuously molded cogs are straighter than stamped steel, resulting in more consistent, predictable shifting performance - CNC machined aluminum alloy spider carrier saves weight - Sprockets are chrome-plated for hardness and corrosion resistance - Precision ramps and chamfers for rapid chain movement - Compatible with SRAM and Shimano 11-speed systems - Aluminum lock ring Combinations: - 11 – 25T: 11-12-13-14-15-16-17-19-21-23-25 - 11 – 28T: 11-12-13-14-15-16-17-19-21-24-28 - 11 – 32T: 11-12-13-14-15-17-19-21-24-28-32
$44.99
Sometimes less is more. With 10 speeds, an 11-48T range, and evenly spaced gear steps, the ADVENT X cassette allows riders to shift less often to find the right gear, while still having enough range to ride what they want. Fewer cogs also means less weight and a wider chain for better mud shedding. It even fits on standard 10-speed freehub bodies so you don't need to buy new wheels for no reason. In short, it's everything you want in a high-end drivetrain. - 11-48T range with even gear steps for predictable gear changes - Hardened steel cogs are optimized for eBike compatibility - ED black with anodized surface finish - Continuously forged precision cogs
$45.99
RS3 Cassettes are a great replacement for 11-speed road sytems. - Lightweight wide-range Road cassette compatible with HG 11sp road freehub bodies - Steel cogs (top 3 mounted to spider), steel lockring, and composite spacers - Cassette Body Type: Shimano/SRAM 11 Speed Road - Drivetrain Speeds: 11 - Cogs: 11,12,13,15,17,19,21,23,25,28,32 - Weight: 332 g
$46.00
SRAM's PG-970 9-Speed Cassette is the perfect replacement for your worn-out gears. It features a rugged steel construction for awesome durability and SRAM's PowerGlide technology for smooth, precise shifts.
Page 1 of 3 Next page