Headsets
Top and bottom cups are available separately allowing our headsets to fit almost any frame and fork combination.
KEY FEATURES
- Replaceable stainless steel bearings (resist corrosion)
- Split crown race for easy installation and removal
- Wide selection of different cup sizes to fit most headset combinations
- Multiple seals to keep out the elements
- Available in black, silver, bronze, blue, red, purple and orange
- Top and bottom cups are available separately allowing our headsets to fit almost any frame and fork combination
- Head Doctor top cap sold seperately
- Headset cups use custom made, replaceable stainless steel bearings to resist corrosion
- The cups are all machined from 2014 T6 aluminium
- Sealing is achieved through an adjustable taper ring cover and integrated rubber seal
$3.00
FSA Standard Headset Bearings
$9.95
- Fork crown race for genuine Ritchey headsets
- Alloy with 45-degree taper
$10.45
Grade 300 retainer bearings for headset and bottom bracket service
- 5/32" ball diameter
- 20 balls per retainer
- Grade 300 Bearings
- 10 Retainers/Bag
$11.00
FSA Standard Headset Bearings
$13.00
FSA bearings that set directly into the frame without the use of pressed in cups.
- 36/45 degrees is Cane Creek-compatible
- 45/45 degrees is Campagnolo-compatible
$13.99
Custom Cane Creek lower race for Salsa.
$14.95
Headset bearings for Wolf Tooth headsets.
- Replacement bearings
$14.99 - $19.99
- Forged steel cups with caged 5/32" ball bearings
- TH-857 features a alloy top cover
- TH Series: External Cup, traditional
- S.H.I.S.: EC34/28.6|EC34/30
- Stack: 14.9mm/11mm
- Color: Black
- Weight: 126g
$16.95
Compatible crown races for Ritchey headsets.
- This adaptor allows 36° headset bearings, such as those from Chris King, to fit the Ritchey WCS Carbon Adventure fork that feature a 45° crown race
- This adaptor is designed for the Ritchey Carbon Adventure fork, but it will work with all Ritchey carbon fiber forks, though with possible slight cosmetic inconsistencies
- Stainless steel
- Use of this adapter will effectively increase fork length by 4.4mm
$16.99
- CrMo headset with oversized 3/16" lower ball bearings, 5/32" upper bearings and a nylon top cover
- Hammer: External Cup, traditional
- S.H.I.S.: EC34/28.6|EC34/30
- Stack: 12.8mm/11.9mm
- Color: Black
- Weight: 149g
$18.00
ABI Headset Bearing for new builds or replacements.
$18.00
Replacement headset uppers from FSA.
- S.H.I.S. Stem Clamp Diameter: 28.6 Threadless
- Bearing Type: Cartridge
- S.H.I.S Upper: IS41
- Upper Stack Height: 8.2
$18.95
The Ritchey Logic Threadless headset features a smaller upper bearing to save weight, while the oversize lower bearing is designed to handle loads. Deep bearing cups promise solid insertion.
- Bearing: Retainer ball bearing
- Material: Steel/Plastic
- Stack Height: 28.3mm
$19.95
Headset bearings for Wolf Tooth headsets.
- Replacement bearings
$19.99
- CrMo headset with oversized 3/16" lower ball bearings, 5/32" upper bearings and an alloy top cover
- Mallet: External Cup, traditional
- S.H.I.S.: EC34/28.6|EC34/30
- Stack: 15.4mm/13.6mm
- Color: Black
- Weight: 150g
$19.99
- Carbon fiber top caps, bolt and steel star nut
- Size: 1-1/8"
- Color: Black
- Weight: 21g
$20.48
Grade 300 retainer bearings for headset and bottom bracket service
- 5/32" ball diameter
- 22 balls per retainer
- Grade 300 Bearings
- 10 Retainers/Bag
$20.99
Replacement headset bearings from FSA.
- Compatible with most Trek MTB integrated headset systems
- Sealed bearing for long life
- Compatible with Knock Block Headsets
$21.99
A new headset gives you a new lease on life. This is the upper part of an integrated headset for a 44mm headtube.
- Lower part of the headset sold separately
$21.99
The Sunday BMX integrated headset is designed to be a quality headset at an affordable price.
- Laser-etched Sunday logo
- Color-matching spacers included
- Gyro compatible
- High quality sealed bearings and precision tapered wedge help to keep the headset tight
$21.99
The Sunday BMX integrated headset is designed to be a quality headset at an affordable price.
- Laser-etched Sunday logo
- Color-matching spacers included
- Gyro compatible
- High quality sealed bearings and precision tapered wedge help to keep the headset tight
$25.00
FSA bearings that set directly into the frame without the use of pressed in cups.
- 36/45 degrees is Cane Creek-compatible
- 45/45 degrees is Campagnolo-compatible
$25.50
ABI Headset Bearing for new builds or replacements.
$25.99
- Weight: 160g
- Crown Race: 30
- S.H.I.S. Lower: EC34
- S.H.I.S. Upper: EC34
- S.H.I.S. Stem Clamp Diameter: 28.6 Threadless
$26.00 - $62.00
- Pig DH-Pro feature angular contact sealed upper bearing and an industrial cartridge sealed bearing with an alloy upper cup and CrMo lower cup
- Pig feature oversized 1/4" lower ball bearings, 5/32" upper bearings
- Big Fat Pig feature super oversized caged ball bearings
- Pig: External Cup, traditional
- Pig S.H.I.S.: EC34/28.6|EC34/30
- Big Fat Pig S.H.I.S.: EC49/38.1|EC49/40
- Pig DH Pro S.H.I.S.: EC34/28.6|EC34/30
- Stack: 15.4mm/13.6mm (Pig), 17mm/11.7mm (Big Fat Pig), 15.5mm/16mm (Pig DH Pro)
- Color: Black
- Weight: 193g (Pig), 345g (Big Fat Pig), 198g (Pgi DH Pro)
$26.99
Designed using high-quality sealed bearings and a precision tapered wedge to keep the headset tight at all times.
FEATURES
- High-quality sealed bearings.
- Color matched spacers included.
- 10mm, 3mm and 2mm (15mm total)
- Laser etched Odyssey bearings.
SPECS
- Campagnolo standard spec.
- 1-1/8 integrated headset.
- 45º tapered bearings 41.8mm outer diameter (fits 42mm BMX head tubes).
$28.00
ABI Headset Bearing for new builds or replacements.
$28.95 - $42.95
For bikes featuring integrated headsets (such as the Ritchey Road Logic and Swiss Cross), the WCS Drop In Integrated Headset stands above all others. This alloy headset lower features stainless steel angular contact sealed cartridge bearings with a titanium coating for corrosion resistance, and they're packed with Ritchey high-webbing grease.
- Material: Alloy
- Bearing: Sealed cartridge, Ti-coated
- Weight: 28-35g
$29.95
For bikes featuring integrated headsets (such as the Ritchey Road Logic and Swiss Cross), the Comp Drop In Integrated Headset stands above all others. The Comp features full-complement stainless steel angular contact cartridge bearings packed with Ritchey high-webbing grease.
- Top cap: 8.3 or 15.3mm
- Material: Alloy
- Upper Fit (S.H.I.S.): IS42/28.6
- Lower Fit (S.H.I.S.): IS42/30
- Upper Bearing OD: 41.8
- Lower Bearing OD: 46/42
- Top Cover OD: 46
- Bearings: Sealed cartridge
- Weight: 74g
$29.95
Wolf Tooth Performance Headsets feature Black Oxide Cartridge Bearings, balancing quality and price.
- Black Oxide Bearings are made from chromium steel for high load capacity and durability
- Black oxide coating reduces corrosion
$29.99
- Gyro compatible, 45/45 degree angular contact cartridge bearings, alloy crown race
- Impact: 45x45 degree Campagnolo Integrated
- S.H.I.S.: IS42/28.6|IS42/30
- Stack: 8mm/1mm
- Color: Black, Orange, Red
- Weight: 68g
$29.99
New dust cap design, with Monogram laser etched logo, for a cleaner look to accommodate a taller riding set up with less spacers. Same quality as Odyssey's Pro Headset using high-quality sealed bearings and a precision tapered wedge to keep the headset tight at all times.
FEATURES
- High-quality sealed bearings.
- Color matched spacers included.
- 15mm dust cap. With 3mm, and 2mm spacers
- Laser etched Odyssey bearings.
SPECS
- Campagnolo standard spec.
- 1 1/8-inch integrated headset.
- 45º tapered bearings
- 41.8mm outer diameter (fits 42mm BMX head tubes).
$30.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets.
• Technical Description: IS52/30/H1
• Bottom Type: IS - Integrated
• Bottom Head Tube Inside Dia.: 52.1mm
• Crown Race Seat Dia.: 30.015mm
• Crown Race Type: Steel, Face-Sealed
• Bottom Stack Height: 1mm
• Bottom Bearing Type: Black Oxide, Sealed
• Material: N/A
• Weight: 72g
$30.99
This is the Integrated Bottom Bearing for the Cane Creek 40 Series headset. Please contact us if you have any questions about which parts are correct for your headset.
$31.99
High-quality replacement headset bearings are smooth like butter.
- Sealed cartridge bearing for long life
- Durable steel bearing housing
$32.00
ABI Headset Bearing for new builds or replacements.
$32.95
The Ritchey Logic Threadless headset features a smaller upper bearing to save weight, while the lightweight, precision-machined aluminum cups are deep for solid insertion.
- Bearing: Semi cartridge
- Material: Steel
- Stack Height: 30.2mm
$32.95
Comp Logic Threadless Headset
- Lightweight, precision-machined aluminum cups
- Deep cups for solid insertion
$32.99
Cane Creek compatible integrated style bearings fit directly into headtube.
- 36-degree inner chamfer and 45-degree outer chamfer
- Crown Race: 30
- S.H.I.S. Lower: IS41
- S.H.I.S. Upper: IS41
- S.H.I.S. Stem Clamp Diameter: 28.6 Threadless
$33.95
Designed for bicycles with press-fit headsets, the Classic Press Fit Upper Headset features full-complement stainless steel angular contact cartridge bearings packed with Ritchey high-webbing grease. Wrapped in our timeless high-polish finish, the Classic Press Fit Upper headset adds that classy detail your bike deserves.
- Top cap: 7.3
- Material: Alloy
- Upper Fit (S.H.I.S.): ZS44/28.6
- Upper HT OD/ID: 50/44mm
- Bearing: Sealed cartridge
- Finish: High-polish silver
- Weight: 43g (7.3mm)
$33.95
For bikes featuring integrated headsets (such as the Ritchey Road Logic and Swiss Cross), the Comp Drop In Integrated Headset stands above all others. The Comp features semi-cartridge high-quality bearings.
- Material: Steel
- Top Cover OD: 46mm
- Bearings: Semi-cartridge
- Weight: 74-83g
$33.99 - $44.99
The 40-Series is the workhorse of Cane Creek's headset line-up. Representing the balance of performance, durability and value, the series incorporates all the features necessary for a robust, lightweight, long-lasting headset. Zero stack uppers press into head tube with very little stack height. Zero stack cups press into the head tube with very little stack height.
- Sealed black oxide bearings
- Steel crown race with integrated seals
- Compatible with tapered 1-1/8" to 1-1/2" steerer tubes, or straight 1-1/8" steerers with a conversion crown race (sold separately)
$34.00
Replacement headset uppers from FSA
- Internal HS Upper Orbit-Z
- Steerer diameter: 1-1/8"
- ZS44/28.6 (36 x 45)
- 5.3/13.1mm
$34.95
Wolf Tooth headsets are machined in the USA with aircraft-grade 6061 aluminum. Our Performance Headset is built to include a black oxide-coated chromium steel bearing and a one-year warranty. Our headsets stand above the rest with three levels of superior custom sealing to protect bearings from the elements and prolong the life of the headset. They are designed to be lightweight, strong, and durable. Available in a variety of colors. These EC headsets are for frames with external bearing cups, which places the bearing outside of the frame with these headsets.
Lower assembly features:
- Custom molded dual-lip seal on the crown race to protect the lower bearing in the toughest conditions.
- 12.25mm stack.
- Service and additional parts available.
$34.95
Wolf Tooth headsets are machined in the USA with aircraft-grade 6061 aluminum. Our Performance Headset is built to include a black oxide-coated chromium steel bearing and a one-year warranty. Our headsets stand above the rest with three levels of superior custom sealing to protect bearings from the elements and prolong the life of the headset. They are designed to be lightweight, strong, and durable. Available in a variety of colors. These EC headsets are for frames with external bearing cups, which places the bearing outside of the frame with these headsets.
Lower assembly features:
- Custom molded dual-lip seal on the crown race to protect the lower bearing in the toughest conditions.
- 12.25mm stack.
- Service and additional parts available.
$34.95
Wolf Tooth headsets are machined in the USA with aircraft-grade 6061 aluminum. Our Performance Headset is built to include a black oxide-coated chromium steel bearing and a one-year warranty. Our headsets stand above the rest with three levels of superior custom sealing to protect bearings from the elements and prolong the life of the headset. They are designed to be lightweight, strong, and durable. Available in a variety of colors. These EC headsets are for frames with external bearing cups, which places the bearing outside of the frame with these headsets.
Lower assembly features:
- Custom molded dual-lip seal on the crown race to protect the lower bearing in the toughest conditions.
- 12.25mm stack.
- Service and additional parts available.
$34.95
Headset bearings for Wolf Tooth headsets.
- Replacement bearings
$34.95
Wolf Tooth headsets are machined here in our Minnesota shop with aircraft-grade 6061 aluminum. They are designed to be lightweight, strong, and durable. Performance Headsets with Enduro black oxide bearings have a one-year warranty. Our headsets have three levels of industry-leading custom sealing to protect bearings from the elements and prolong the life of the headset. Available in a variety of colors. These ZS headsets are for frames with internal bearing cups that are pressed into the frame.
Lower assembly features:
- Custom-molded dual-lip seal on the crown race protects lower bearing in the toughest conditions.
- All components are precision machined in-house at Wolf Tooth from aircraft-grade aluminum to ensure the highest level of quality.
- Service and additional parts available.
$34.99
The lightweight Orbit UF uses a mixture of bearing types, with caged ball bearings in the top race and sealed cartridge angular contact bearings in the bottom race. Upper and lower water seals keep the elements at bay.
- Forged and CNC machined 6061/T6 Aluminum cups
- Patented alignment tip for increased durability and performance
- Upper cup uses double sealed 5/32" ball bearings
- Lower cup uses a black seal angular contact bearing
- Laser etched aluminum top cap
- Weight: 99g
- Crown Race: 30
- S.H.I.S. Lower: EC34
- S.H.I.S. Upper: EC34
- S.H.I.S. Stem Clamp Diameter: 28.6 Threadless
$35.00
These baseplates are the foundation that keeps Chris King headsets turning with legendary smoothness. Manufactured from high-quality stainless steel or titanium, Chris King makes replacement baseplates for all standard sizes and a number of ingenious solutions for those that need something a little special to make their headset work.
- Engineered and manufactured in Portland, Oregon USA
- Devolution baseplates are a stainless steel solution that allow Chris King headsets to adapt to a wide variety of steerer tube sizes
- 30.0mm for 1.5 lower bearing and 1 1/8" steerer
$36.95
For bikes featuring integrated headsets (such as the Ritchey Road Logic and Swiss Cross), the WCS Drop In Integrated Headset stands above all others. This carbon fiber beauty features full-complement stainless steel angular contact cartridge bearings packed with Ritchey high-webbing grease.
- Top cap: 8.3mm
- Material: Alloy
- Upper Fit (S.H.I.S.): IS42/28.6
- Upper Bearing OD: 41.8
- Top Cover OD: 46mm
- Bearing: Sealed cartridge, Ti-coated
- Weight: 36g
$36.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets.
• Technical Description: IS41/28.6/H9/K
• Top Type: IS - Integrated
• Top Head Tube Inside Dia.: 41.1mm
• Stem Clamp Dia.: 28.6mm
• Top Stack Height: 9mm (Short), 15mm (Tall)
• Top Bearing Type: Black Oxide, Sealed
• Material: 6061 aluminum
• Weight: 37g
$37.00
- 15.2mm/9.7mm CF IS-2-138
- 1-1/8" / 1-3/8", 36°/ 45° ACB
- For tapered 45mm / 52mm OD head tube
- For 1-1/8" to 1-3/8" tapered fork
- Carbon fiber top cover
- Angular Contact Bearing (black seal)
- Stack Height 16.1mm
- 65.4 grams
$37.67
ABI Headset Bearing for new builds or replacements.
- Enduro Headset Bearing ACB 4545 137 Stainless 37 x 46.85 x 7 mm: 45 x 45
$39.95 - $45.95
Bringing Ritchey's heritage of legendary cycling products into the world of e-bikes and electronic shifting, Tom Ritchey designed a unique headset that allows the cables to be run internally from the stem into standard frames without requiring the frame or fork to be modified. The Logic-E headset is designed to allow Shimano Di2 and STEPS cables to be concealed from view and the wind while protecting them from damage.
- Steerer size: 1-1/8" upper
- Drop-in (IS) or Press-Fit (S)
- Weight: 35-44g
Page 1 of 3
Next page