Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Other

$22.00
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - CNC machined 6061 aluminum - Black anodized finish - Made in the USA
$1.50 - $2.00
- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool
$39.95
- Enhanced aerobar position performance - Long term pressure distribution - Anti-slip surface Upgrade your Profile Design aerobars to maximize your performance and enhance comfort while in the aero position. The Ergon CRT Arm Pads for Profile Design help to maintain the perfect aero position for many hours during time trials and triathlons. Made from high end OrthoCell foam, the pads prevent pressure discomforts and noticeably dampen road vibrations. The surface is slip-resistant to help you fully focus on your race!
$36.00
Beautifully machined and hand-friendly, Salsa's Flip-Off Quick-Release Skewer is a great way to keep your wheel attached to your bike. It's constructed from stainless steel to make sure it'll be along for the ride for years to come. This QR works with 170mm fatbike rear hubs.
$30.00
Replacement swing plates for Alternator 1.0 dropouts.
$30.00
Replacement swing plates for Alternator 1.0 dropouts.
$29.99
Alternator Flat Mount is an adjustable dropout system designed to offer flawless functionality with flat-mount brakes installed. The dropout plates move back and forth on the frame, controlled with a captive barrel nut and screw for a minimal appearance. - Compatible with frames designed for the Alternator Flat Mount standard - Allows the rear axle to be adjusted through a 15mm range - Thru-axle diameter = 12mm; thread pitch = 1.5 - Note: This part number only includes a single Alternator Flat Mount plate - Uses Salsa 465 replaceable derailleur hanger (FS2322), sold separately. Also requires Salsa Axle Stud kit (FS1181) - Hardware kits (sold separately) must always be paired with the style of dropout plates being installed on the frame
$34.00
Our Post-Lock is a bicycle rack attachment point that can be positioned anywhere on your seatpost to provide a mounting point. Post-Locks do not have a lip like our Lip-Lock, Flip-Lock, and Rack-Lock so therefore cannot be used as a seatpost clamp. - NOTE: This IS NOT a seat collar and CANNOT BE USED to keep your seatpost in place - NOTE: NOT FOR USE with carbon fiber seatposts - NOTE: Please consult your seatpost manufacturer to check compatibility - Max torque 3–5Nm - AL-6061 Aluminum - Strong rack attachment points - 34mm-wide rack mount threaded for M5 bolts - Available for 27.2, 30.9, and 31.6 mm diameter seatposts
$22.00
Lip-Locks secure your seatpost and add functional bling to your ride. - Non-quick release version of the Flip-Lock - Machined 6061-AL with stainless steel pivot and bolt - Anodized with laser-etched logo - For smooth operation, lightly grease the bolt threads
$34.00
Rack-Locks are one part form, two parts function. Sure, they still look great and do a great job of keeping your seatpost in place, but they also provide a mounting position for the front struts of a rack. - Max torque 3–5Nm - AL-6061 Aluminum - Strong rack attachment points - 34mm-wide rack mount threaded for M5 bolts - Stainless steel pivot and bolt - Available in 30.0, 32.0, 35.0, and 35.4 mm sizes - Black anodized with laser-etched logo - 45g for a 32.0mm collar
$20.00
Replacement derailleur hangers for Salsa frames.
$20.00
Replacement derailleur hangers for Salsa frames.
$30.00
Alternator 2.0 is the latest iteration of Salsa's adjustable dropout system. Alternator 2.0 Dropouts are a modular system consisting of replaceable dropout plates and fixing hardware. They are specifically designed for, and only compatible with, Salsa frames using the 2.0 system. - Alternator 2.0 Dropout plates are compatible with frames featuring 142, 148, 177, or 197mm spacing - Hardware kits (sold separately) must always be paired with the style of dropout plates being installed on the frame - Allows for the rear axle location to be adjusted through a ~17mm range relative to the bottom bracket axle - Note: This part number only includes a single Alternator 2.0 plate
$6.00 - $20.00
Chainstay protectors to guard your Salsa frame from scratches and damage.
$4.99
Frame Plugs for Internal Cable Routing
$27.00
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - CNC machined 6061 aluminum - Black anodized finish - Made in the USA
$15.40
Disc brake adaptors designed to mate Magura disc brakes with a variety of frame mounts and rotor sizes. - Includes hardware to mount adaptor to frame
$18.00
Power Links provide tool free chain assembly. - 8-speed width: 7.1mm - 9-speed width: 6.8mm - Chain Compatibility: SRAM - Reusable: Yes
$18.00
Power links provide tool free chain assembly. - Chain Compatibility: SRAM - Reusable: No
$8.95 - $16.50
Replacement derailleur hanger screws for Syntace X-12 system.
$19.31
Clamps for mounting Magura disc brake levers to the bar. Does not include mounting hardware, clamp only. - Sold individually
$11.00
This is a pair of spacers that adapts a 386 EVO crankset to a 68mm BB30 or PF30 frame; use in combination with the standard bottom bracket for your chosen frame.
$182.00
The Profile Design Flip/Ergo platform is designed to give riders the freedom to find an optimal low stack position with the ability to hold the bar tops when climbing. There are 80 distinct position options achievable just by moving the armrests. As a clip-on bar it is also possible to adjust the extension width, length, and tilt easily. - 50a extensions offer a 50deg ski bend shape with a 7.5mm (per side) lateral shift - Extensions 340mm long and can be cut to size to suit nearly every rider - Bracket: Flip - Clamp Diameter: 31.8mm (26.0 w/Shims) - Armrest: Ergo / 10mm Pads - Armrest Width: 112mm to 280mm in 18.5mm steps (with Extensions at 100mm) - Armrest Offset: -85mm to -17.5mm in 7.5mm steps - Armrest Stack: 40mm - Weight: 587g
$84.95
ReMote Sustain Lever - Levers are Reverb Stealth series specific - A-series have no Rockshox marking below the head whereas B-series have gold Rockshox markings below the head - Engineered break-away pivot that allows the lever to break away from the pivot in the event of a crash - Cable Kind Clamp does not damage secured cables and features captive hardware - Only compatible with Reverb Stealths - Features a leak-proof, robust, and low-maintenance mechanical actuation system - Easy cable detachment for service, travel or bike shipping - 40mm reduction in in-frame height compared to Connectamajig Reverbs
$24.95
The precision-engineered Wolf Tooth Seatpost Clamp secures your seatpost and looks good doing it. At the heart of the Wolf Tooth Seatpost Clamp is a custom self-aligning bolt and anchor. The M5 bolt includes spherical washer and mates with a cylindrical anchor barrel. This means that threads are always perfectly aligned, preventing binding and ensuring consistent clamping force. - M6 stainless steel bolt with integrated washer - Tool interface - 4mm hex key
$24.95
The precision-engineered Wolf Tooth Seatpost Clamp secures your seatpost and looks good doing it. At the heart of the Wolf Tooth Seatpost Clamp is a custom self-aligning bolt and anchor. The M5 bolt includes spherical washer and mates with a cylindrical anchor barrel. This means that threads are always perfectly aligned, preventing binding and ensuring consistent clamping force. - M6 stainless steel bolt with integrated washer - Tool interface - 4mm hex key
$24.95
The precision-engineered Wolf Tooth Seatpost Clamp secures your seatpost and looks good doing it. At the heart of the Wolf Tooth Seatpost Clamp is a custom self-aligning bolt and anchor. The M5 bolt includes spherical washer and mates with a cylindrical anchor barrel. This means that threads are always perfectly aligned, preventing binding and ensuring consistent clamping force. - M6 stainless steel bolt with integrated washer - Tool interface - 4mm hex key
$36.95
The Wolf Tooth Quick Release Seatpost Clamp allows for easy saddle height adjustments. An ergonomic lever on the side of the clamp opens and closes the clamp, which is held together by a bolt with a bronze bushing that lets the rider set the torque. It is friendly with carbon, steel, alloy, and titanium frames. - Bronze bushing for smooth lever action - Low-profile ergonomic lever - Stainless steel bolt with spherical washer - CNC machined 6061-T6 aluminum
$15.95
Wolf Tooth CenterLock Rotor Lockrings for securing centerlock rotors to centerlock hubs. Machined from 7075-T6 aluminum at Wolf Tooth in Minnesota, USA. - Compatible with 12mm, 15mm and 20mm thru axles and QR - Machined 7075-T6 aluminum - Durable anodized finish - Torque to 40Nm - Not compatible with 6-bolt rotors and hubs - Washer included
$15.95
Wolf Tooth CenterLock Rotor Lockrings for securing centerlock rotors to centerlock hubs. Machined from 7075-T6 aluminum at Wolf Tooth in Minnesota, USA. - Compatible with 12mm, 15mm and 20mm thru axles and QR - Machined 7075-T6 aluminum - Durable anodized finish - Torque to 40Nm - Not compatible with 6-bolt rotors and hubs - Washer included
$6.00
FSA Service Parts for BB30 Frames
$9.00
FSA (Full Speed Ahead) Polycarbonate Headset Stack Spacers
$4.00
Internal components for servicing the Reverb and Reverb Stealth mechanism.
$20.99
Replacement headset bearings from FSA. - Compatible with most Trek MTB integrated headset systems - Sealed bearing for long life - Compatible with Knock Block Headsets
$9.00
External Reverb and Reverb Stealth parts that can be installed without needing to open the mechanism.
$21.00
Bottom bracket cup and spindle spacers for adjusting chainline or bearing play.
$7.88
Carbon fiber headset stack spacers, precision cut to ensure proper headset function. - Compatible with all threadless and threaded headsets
$24.95
These 6mm long bolts are designed for single chainrings that have non-threaded standoffs. Uses a double hex head interface so you don't have to use a chainring nut spanner. - 6mm length - Made in the US out of 7075-T6 Aluminum - Has hex heads on both the bolt and nut for easy installation - Max torque of 7-8 Nm with light grease on threads only
$17.95
Add some color and style to your bike build with Precision Headset Stack spacers. Offered in multiple sizes, made proudly in Minneapolis, MN, and laser marked with the stack size on each end, find your perfect fit. - Designed and manufactured in Minneapolis, MN USA - Fits 1 1/8"steerers only - Made from 6061-T6 Aluminum
$17.95
Add some color and style to your bike build with Precision Headset Stack spacers. Offered in multiple sizes, made proudly in Minneapolis, MN, and laser marked with the stack size on each end, find your perfect fit. - Designed and manufactured in Minneapolis, MN USA - Fits 1 1/8" steerers only - Made from 6061-T6 Aluminum
$17.95
Add some color and style to your bike build with Precision Headset Stack spacers. Offered in multiple sizes, made proudly in Minneapolis, MN, and laser marked with the stack size on each end, find your perfect fit. - Designed and manufactured in Minneapolis, MN USA - Fits 1 1/8" steerers only - Made from 6061-T6 Aluminum
$24.75
Add some color and style to your bike build with Precision Headset Stack spacers. Offered in multiple sizes, made proudly in Minneapolis, MN, and laser marked with the stack size on each end, find your perfect fit. - Designed and manufactured in Minneapolis, MN USA - Fits 1 1/8" steerers only - Made from 6061-T6 Aluminum
$15.23
Aluminum headset stack spacers precision cut to ensure proper headset function. - Precision cut for proper function
$13.60
Aluminum headset stack spacers precision cut to ensure proper headset function. - Precision cut for proper function
$137.00
Paul's dropper trigger with stacked dual sealed cartridge bearings, two different cable clamp options, a barrel adjuster, and a hinged clamp. - Dual stacked sealed cartridge bearings in the pivot for zero slop and long (serviceable) life - Pinch bolt and cable head recess allowing you to run the cable in either direction - Hinged clamp so you can install it without removing the grip - Barrel adjuster for fine tuning the cable tension
$13.00
These Hope Bore Caps are designed to fit Hope brake calipers.
$8.90
Replacement small parts for Hope disc brake Hope disc brake calipers.
$19.00
Hope Tech 4 master cylinder reservoir lids are a perfect fit as a replacement or for those looking for a customized look. - Made from high quality precision CNC machined aluminum - Durable anodized finish - Includes (2) torx cap screws - Only compatible with Hope Tech 4 brake levers
$134.93
Cartridges fully replace the functional mechanism of KS dropper posts. Pick the model and length of drop for the post you need to service. These are also called "Oil Pressure Sticks" and "Air Pressure Sticks" In KS Service Documentation. - Fully replace the functional mechanism of KS dropper posts - May not work with OEM dropper posts
$78.65
Campagnolo Rear Recessed Pivot Bolt Assembly Caliper Brake Part
$26.36
Saddle clamp heads and lowers for KS Dropper posts.
$12.71
Saddle clamp heads and lowers for KS Dropper posts.
$34.00
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399) - CNC machined 6061 aluminum - Made in the USA
$15.99
Replacement top subassemblies are compatible across Cane Creek 110-, 40-, and 10-Series headsets with the same SHIS values. - Bearings not included
Page 1 of 27 Next page