Parts & Accessories
An easy to use dipstick that allows you to check the sealant level in your tires without having to pop the bead. With the valve positioned at 6 o'clock remove the valve core, insert the dipstick and read the sealant level. - 5-pack
Specifically designed for the vulcanization of tube patches, valve patches, and rubber-based tube valve repair units.
- Shim adds support to Presta stem used in a Schrader rim
Compatible with all tubeless road, MTB and gravel tires. Refill packs with 10 repair plugs (5x thin and 5x thick).
$6.95 - $27.95
- Repairs punctures up to 1/4 (6mm) - Optimized for temps down to 15degF (-9.4degC) - Synthetic later minimizes the risk of allergic reactions
$6.99 - $19.99
Your tubeless wheels will benefit from the use of Orange Seal Tubeless Tire Sealant. It is proven to seal large punctures up to 1/4-inch and perform under varying temperatures and altitudes. Orange Seal Tubeless Tire Sealant is compatible with most bike tire systems and is eco-friendly.
$7.99 - $20.89
Endurance formula lasts twice as long as standard Orange Seal. - Premium Latex coats the whole casing, from tire bead to tread cap - Seals punctures up to 1/8-inch, and slices up to 1/2-inch with the use of Nanites - Developed to add as little weight to a tire as possible - Made of eco-friendly biodegradable ingredients
These oversized Presta valve nuts are specifically designed to provide extra clearance and extra leverage to better tighten tubeless valves. They're especially helpful on single-wall rims. -Concave to allow better engagement of the valve/rim interface -Oversize to provide extra torque when tightening -Especially helpful on single-wall rim tubeless setups -CNC-machined AL-6061
$9.00 - $17.00
Whisky Parts Co. Tubeless Rim Tape.
$9.00 - $53.00
Whisky’s tubeless rim tape is designed to make setup as easy as possible. Elasticity allows for smooth, even adherence while translucency lets you see where the tape contacts the rim. Different widths available to fit almost any rim.
Laugh in the face of punctures with Muc-Off's super lightweight inner tube sealant! The No Puncture Hassle Inner Tube Sealant is easy-to-install, and the cutting edge molecules seal holes in tubes of up to 4mm, ensuring that your ride is uninterrupted. - Proprietary water-based non-hazardous formula developed specifically for use with inner tubes - Compatible with a wide range of tube sizes and bikes - suitable for commuter, folding, urban, touring, MTB and e-bikes - Works on multiple punctures - Lasts the life of the inner tube/tire - Contains cutting-edge molecules to help seal holes quickly and effectively; seals holes in tubes up to 4mm
$9.99 - $153.99
Looking for a super lightweight but badass tubeless sealant? Boom, you've just found it my friend! No Puncture Hassle performs under the most brutal race conditions. The cutting-edge microfiber molecules fill the bigger holes and tears, whilst the advanced latex forms a strong seal instantly. The formula also contains a unique UV detection system that highlights any punctures you haven’t seen during your ride. Developed with the world's top downhillers and pro peloton teams, to give you the finest tire sealant available. It's non-corrosive and easily washes off with water. Compatible with tubeless ready and full UST wheels/tires, No Puncture Hassle works from 15psi-120psi and temperatures from -20°C to +50°C. Our pouch is designed to fit your Presta valve perfectly and is ideal to add to your toolkit or ride pack for emergency top ups on the go! - For Downhill, Enduro and Road tires - Seals tears and holes up to 6mm - Contains UV puncture detection - Won't dry out or ball - Works from 15psi-120psi and temperatures from -20°C to +50°C - Biodegradable
Specialized's Airlock Sealant is the in-tube solution for flat prevention, surpassing the competition in flat protection performance. It's featured here in a personal, 8oz container that's ideal for two standard wheels. - Non-toxic, non-separating formula doesn't have a limited shelf life like the competition. - Coats the tube for permanent protection. - Works with any bicycle tube with a removable valve core. - Works continuously to prevent slow leaks. - Completely homogenous, so it doesn't puddle. - 8oz bottle fills two inner tubes. - 8oz bottle includes valve puller and hose under cap.
Our new RapidAir Tire Sealant was custom-designed in tandem with our new RapidAir tires and Roval wheels to be the fastest tire setup out there. Through development, we learned that high-pressure, 24-30mm tires require a totally different formula to seal punctures. Our new exclusive mixture not only immediately seals punctures up to 3mm across a large range of temperatures, but unlike other sealants, RapidAir sealant will also keep its seal when you reinflate back to normal riding pressure. - Compatible with CO2. - Creates the strongest plug after sealing. - No damage to bike parts. - Performs in a wide temperature range (-20° - 70°C). - Recommended sealant amount per tire: Tire size 24-26mm - 40ml, 28-30mm - 50ml - - - For Maximum performance, use 60ml for any 24-30mm - Seals instantly with minimal pressure lost.
The Challenge threaded inline valve extenders add 41.5mm length so that your valves will protrude thru deeper dish rims allowing you to attach a pump. They are compatible with inner tubes and tubular tires that include removable valve core Presta valves. They also include rubber gaskets for an air-tight fit. The kit includes two alloy extenders and a plastic tool.
The Problem Solvers Presta Valve Extenders add 33 to 50mm of length to your tube or tire valve so that it protrudes far enough out of deep-section rims so that you can attach your pump. These lightweight, durable aluminum extenders simply screw onto your Presta valves by hand.
$10.99 - $14.99
You'll ride with peace of mind when you pack a can of Vittoria's Pit Stop Tire Sealant. It contains pure latex foam sealant and compressed air to quickly inflate and repair your tire so you can get on with your ride. Available in three sizes for varying tire volumes: - Road Racing: inflates 21-28-inch tubulars up to 94 psi and 700c clinchers up to 87 psi so you can ride, instead of walk to the closest pump and top off the tire to full pressure. - 75mL: Repairs and inflates low-volume MTB tires in less than a minute. - 100mL: Repairs and inflates meaty 27.5-inch tires and cross country 29-inch tires in less than a minute.
- Specific DT-Swiss tubeless ready valve stems for tubeless applications - Wide Base designed for mountain rims - Narrow Base designed for road rims
Bigger than standard Presta valve nuts, the Big P-Nut is designed to provide extra leverage to better tighten tubeless valves on standard tubeless rims. - Over-sized design provides extra torque when tightening - CNC-machined from AL-6061 aluminum
The Problem Solvers Presta Valve Extenders add 30 to 70mm of length to your tube or tire valve so that it protrudes far enough out of deep-section rims so that you can attach your pump. These lightweight, durable aluminum extenders are for use with Presta valves that have removable cores. The proper tool for removing the cores and installing the extenders is included.
45NRTH utilizes a two-piece construction method to create a reliable and high-performing bicycle tire stud with a concave carbide-aluminum design. The open space and edges created by the large concave crown result in twice the surface area for increased traction and grip. - Concave tip for traction, durability, and longevity - Aluminum base to save weight - Compatible with 45NRTH stud insertion tool - Compatible with all studdable 45NRTH tires - Large stud offers more bite than regular concave stud and less rolling resistance than XL stud - We design 45NRTH tires for extreme winter cycling applications. We do not recommend this product be used with power assist bikes as the additional torque and system weight can lead to pre-mature casing wear and stud loss.
$12.99 - $109.99
Built with Kevlar to deliver faster and stronger seals, FiberLink represents a new standard for tubeless bicycle tire sealant. Developed with Finish Line's proprietary FiberLink Technology, this groundbreaking pro latex formula seals quickly, ensures maximum seal integrity and delivers optimum longevity. - FiberLink Technology utilizes Kevlar fibers that work synergistically with fast-acting natural latex to seal punctures as they occur. Free-flowing latex cures rapidly to create an adhesive seal which is reinforced with interlinking Kevlar fibers - Low viscosity is ideal for race conditions - Fast-acting natural latex reduces air loss - Optimum longevity between refresh cycles - Low odor and easy to setup - 8oz Drip Bottle
$12.99 - $66.99
Orange Seal’s rim tape comes in 18mm, 24mm, and 45mm widths fitting most bike rims. The elasticity of the tape allows greater flexibility in fitting different types of rims and form factors.
Tubeless repair kit from Muc-Off.
$14.99 - $21.99
Subzero tire sealant. It's formulated to maximize extreme frigid temperature; enabling riders in the far North to ride with flat protection. All while offering the same quick-sealing properties you’ve come to expect. - Premium Latex coats the whole casing, from tire bead to tread cap - Seals punctures up to 1/4" with the use of Nanites - Developed to add as little weight to a tire as possible - Made of eco-friendly biodegradable ingredients - Subzero sealant is developed for use in below-freezing conditions down to -20F
- Ingenious snap-In plugs do the work of rim tape at 1/3 The weight - Makes tire installation easier and nipple repairs faster than with tape - Red plugs fit rims with 8mm holes - Yellow plugs fit rims with 8.5-9.3Mm holes
$15.00 - $125.00
45NRTH utilizes a two-piece construction method to create a reliable and high-performing bicycle tire stud, featuring a concave carbide-aluminum design. The super-sized concave crown creates open space and inside edges of the bowl, resulting in twice the surface area for increased traction and grip. - Concave tip for durability and longevity - Aluminum base to save weight - Compatible with the 45NRTH stud insertion tool - We design 45NRTH tires for extreme winter cycling applications. We do not recommend this product be used with power assist bikes as the additional torque and system weight can lead to pre-mature casing wear and stud loss.
Precision engineered for precise inflation of your Zipp wheels, these Zipp Tangente Valve Extenders take the hassle out of short Presta valves. - For use with threaded Presta (non-removable core) tubes - Knurled end to keep pump from slipping - Available in all lengths to match all Zipp wheels - 3mm hex broach in the barrel to guarantee a perfect seal when tightened
$15.00 - $21.00
Works with Zipp butyl inner tubes with a removable core as well as other leading tubular tires and inner tubes that have removable cores. Available as a kit (3 extenders and 2 wrenches) or individually. - For use with removable valve core Presta tubes - Knurled end to keep pump from slipping - 3mm hex broach in the barrel to guarantee a perfect seal when tightened - Integrated air seal
Setting up tubeless tires can be difficult. Add a single-wall, flat profile fat rim to the equation, and the setup can be downright frustrating. Problem Solver's oversized Super P-Nut’s help with this. First, the bottom of the nut is concave, so the valve can be pulled further through the rim, creating a better seal. The larger outer diameter of the nut provides better grip and leverage so that you can get the valve tighter than with conventional nuts. It’s like a normal P-Nut. Only more super.
Page 1 of 3 Next page