29-Inch

Zipp's 3ZERO MOTO carbon 29 enduro/trail wheelset is inspired by moto to provide riders with the control and durability required for pure trail speed. This wheel and its MOTO Technology have already been proven by multiple victories in the Enduro World Series with our pioneering partnership with the Lapierre Zipp Collective. While other wheel brands limit their focus to traditional box-section rim designs, Zipp engineers—uninhibited by legacy technology—took a different approach. They looked to motorsports as a model. Zipp's Moto Technology's single-wall rim is the optimal approach for an enduro/trail wheelset. The resulting rim provides something we call "ankle compliance." Imagine a runner rounding a sharp turn, the ankle naturally flexing to maintain grip as the runner leans. The 3ZERO rim can locally flex to stay parallel to the ground during cornering, increasing traction like a human ankle adjusts while running. This ability to twist locally allows it to deflect during single bead impacts without the rider getting bounced offline. 3ZERO MOTO helps you take the most direct route, saving seconds when and where they count most. At the center of the 3ZERO MOTO is the ZM2 hubset. This German-engineered hubset features 12 pawls and 132 points of engagement for a quicker response. The hub's improved seal design means better durability on rough terrain. Quarq's TireWiz is an add-on option for 3ZERO to dial in your pressure for an even more compliant ride. - Higher impact resistance - Reduced chance of pinch flatting - More traction in rough corners - Smoother ride in rocky terrain - Ability to run lower tire pressure - Reduced rider fatigue - Frustration-free tire installation - Rim is designed for compliance, creating the feel of extra suspension - German-engineered hubset features 12 pawls and 132 points of engagement for quicker response and also has improved durability - Lifetime Warranty

The 1Zero HiTop S wheelset melds high value with high performance for a better and faster ride. Trail compliance is vital, with modern cross-country courses becoming rougher and more challenging. No longer is it good enough for an XC wheelset to be stiff above all else. Instead, a wheelset should feel alive. The 1Zero HiTop S carbon rim complies with the terrain thanks to Zipp’s proprietary HITOP Technology for carbon layup. The result is a light XC race or adventure wheel that carries speed through all sections of the trail, rocks, roots, and ruts with the durability required for a trail bike with up to 130mm of travel. A compliant wheel provides more confidence. The 1Zero HiTop S features the dependable ZM 900 hubset. - Carbon – 24H Hookless rim, compatible with Tube-type or Tubeless tires - HITOP Technology produces proprietary rim layup to provide compliance and confidence when the trail gets rough - Low weight for effortless accelerations and climbing - Winged rim provides a smooth resting surface for the tire, reducing the chance of pinch flats after a rock hit - Sapim CX Sprint spokes laced to the ZM 900 SL hub with standard or Torque Cap options - Lifetime Warranty - Compatible with TyreWiz tire pressure monitoring system, sold separately

CZR i30 wheels were designed to handle it all, which is why they feature a strategically reinforced carbon layup and are hand built using double-butted spokes, brass nipples and high-engagement hubs featuring top-tier bearings and oversized freehub seals to establish themselves as wheels that simply won't quit. Solid Strip & TCS Tape - Durable nylon strip that lies between the rim and tubeless tape to prevent tubeless tape from pushing into the spoke holes and ensures a smooth interface between the tire and rim. The smooth surface makes it easier to mount a tire by preventing air from escaping around the bead at each indent during inflation. Solid Strip also protects the airtight system from puncture in the case of a broken spoke. 3-Cross Lacing & Brass Nipples - Too many companies are trying to save weight by offering "enduro" wheels with 2-cross lacing patterns and inadequate alloy nipples. While those are suitable for XC and light trail usage, there's no replacement for the long-term reliability of a 3-cross lacing pattern with brass nipples holding it all together. Frequency Hub - The world's best carbon rims deserved to be paired with high-quality hubs that further improve the performance of a lightweight, dependable carbon wheelset. Frequency hubs feature a low-drag, 6-pawl design that alternates contact between two sets of 3-pawl groupings to provide a responsive 5 degrees of freehub engagement. Heavy-Duty Pawl Springs - CZR i30 wheels feature heavy-duty pawl springs that engage with greater force to counteract the additional torque caused by sudden cranking on steep trails. We also offer a Light Pawl-Spring Kit that can be purchased separately for CZR i30 riders who prefer a quieter hub with lighter pawl engagement. Usage: Trail, Enduro

CZR i30 wheels were designed to handle it all, which is why they feature a strategically reinforced carbon layup and are hand built using double-butted spokes, brass nipples and high-engagement hubs featuring top-tier bearings and oversized freehub seals to establish themselves as wheels that simply won't quit. Solid Strip & TCS Tape - Durable nylon strip that lies between the rim and tubeless tape to prevent tubeless tape from pushing into the spoke holes and ensures a smooth interface between the tire and rim. The smooth surface makes it easier to mount a tire by preventing air from escaping around the bead at each indent during inflation. Solid Strip also protects the airtight system from puncture in the case of a broken spoke. 3-Cross Lacing & Brass Nipples - Too many companies are trying to save weight by offering "enduro" wheels with 2-cross lacing patterns and inadequate alloy nipples. While those are suitable for XC and light trail usage, there's no replacement for the long-term reliability of a 3-cross lacing pattern with brass nipples holding it all together. Frequency Hub - The world's best carbon rims deserved to be paired with high-quality hubs that further improve the performance of a lightweight, dependable carbon wheelset. Frequency hubs feature a low-drag, 6-pawl design that alternates contact between two sets of 3-pawl groupings to provide a responsive 5 degrees of freehub engagement. Heavy-Duty Pawl Springs - CZR i30 wheels feature heavy-duty pawl springs that engage with greater force to counteract the additional torque caused by sudden cranking on steep trails. We also offer a Light Pawl-Spring Kit that can be purchased separately for CZR i30 riders who prefer a quieter hub with lighter pawl engagement. Usage: Trail, Enduro

Silent, stealthy and quick engaging. The TR37 / Onyx Vesper wheels are perfectly suited for riders that navigate towards trail riding. Featuring Onyx’s revolutionary sprag clutch, the fastest rolling hub on the market, with a completely silent freehub when coasting, and engages instantly when you drop the hammer. All NOBL wheelsets come taped with valves and ready to go! Simply throw your tires on with sealant and you’re set! - Full carbon fiber design and construction - Onyx Vesper Hub - Includes pre-installed tubeless tape and NOBL alloy valve stem

Updated Fatbike wheels for modern Fatbikes. Lighter and more responsive steering while still maintaining a large footprint and remaining compatible with a wide range of Fatbike tires. - 6-Bolt Disc - Stainless Spokes - 64mm Inner Rim Width - Bear Pawls Hub

The Reserve 30 HD wheel features a 30mm internal width that supports 2.3-2.5" tires, while the thick rim beads stand up to the abuse of tough, rocky, steep trails ridden at elite speed. Off-road rims can see greater single impacts, but nothing beats the full weekend of regular abuse that an EWS race dishes out. - Designed for off-road, aggressive trail riding and racing - Reserve 30 HD rims feature carbon fiber construction with a 4mm asymmetric offset - Reinforced rim bed for impact resistance - Rated for e-bike use - DT Swiss 240 series hubs for reliability and smooth rolling efficiency, including the Ratchet DEG freehub system with 90 points of engagement - Build with DT Swiss Competition spokes and brass nipples - Tubeless tape included

The M5 Pro marks a new era in M Series cross-country wheels, raising the bar for speed, efficiency, and toughness. It is the result of a more than 4-year development project during which ENVE worked closely with its professional athletes to create something that would give the fastest endurance athletes an edge. Unique front and rear rim construction combined with an all-new shallow rim shape offer an unmatched blend of characteristics, designed to go far and fast. - The rear rim is firmer, to maximize power transmission and impact toughness - Wide Hookless Bead - XC optimized anti-pinch flat protection - Innerdrive 80pt engagement hubs with CX Ray straight pull spokes - Alloy external nipples with Nyloc thread-locking - Built for cross-country race applications - Backed by ENVE’s 5-year Factory Warranty and Incidental Damage Protection

The sophisticated ARC 1400 DiCut wheels represent the latest DNA of the 1400 level of DT Swiss and aero partner Swiss Side. The AERO+ profile rims set a new standard in aerodynamic performance and keep aero drag as low as possible under different crosswind angles. In moderate side wind conditions, riders benefit from propulsion through a sailing effect. Reduced wind sensitivity allows riders to maintain a stable aerodynamic position and full control of their bike, making these wheels a perfect synthesis of acceleration, aerodynamics, and handling - even in the most challenging conditions. - 240 Dicut aero hub with redesigned flanges - Carbon, hooked, and crotchet tubeless compatible rim - Featuring the aero-optimized Wheel Tire System (WTS) mounted with a Continental AERO 111, 26mm width tire and TPU tube - ARC 1400 DiCut 50: The low-profile aero wheel to keep the power on your pedals on challenging and sharp courses which demand superb handling - DT aero comp t-head spokes with Pro Lock alloy nipples

Envision riding the fastest line, a rocky ridge or over a nasty field of roots without fear. The EXC 1200 Classic supports your most daring line choices, with still plenty of reserve if they don’t go to plan. Our unique process provides maximum carbon compression to push durability further than ever before. A patent-pending technique for layer-by-layer quality control ensures minimized imperfections straight out of the mold, to maximize your commitment. A lighter front rim has 28 DT revolite spokes, while the more durable rear rim has 32. The high- engaging Ratchet DEG makes for a smaller idle distance, crucial for acceleration out of corners. Get ready to push on the stages and break your limits. - Carbon, Hookless tubeless TSS rim with 30mm inner width - DT Swiss Revolite spokes and 180 classic hub - Ratchet DEG with 90 tooth ratchets

Your entire focus lies on the right line choice, the exact braking point and the spot-on steering movement. All the everyday stress fades away, you feel free and only hear the precise sound of the freehub system. The E 1900 Spline wheels were developed precisely for these freewheeling moments. A proven aluminum rim and hand-laced steel spokes provide the reliability required from an Enduro wheel. - Intended use = All-Mountain/Trail, Enduro and Freeride - Tubeless ready, 30mm wide and light rim - Straight-pull hubs/spokes built with a 3-cross pattern - Includes Tubeless Valve and Tape

SMOOTHER IS FASTER Trail riders who prize nimble handling will be blown away by Traverse SL II's category-leading control, strength-to-weight ratio, and pinch-flat resistance. LIGHTER At 1,645 grams, this is our lightest trail wheelset ever. STRONGER Front and Rear Specific Rims with carbon layups optimized for strength and weight boast 15% greater front wheel strength and 25% more rear wheel strength than the previous Traverse SL. CONTROL-BOOSTING VERTICAL COMPLIANCE 21% more vertically compliant than the previous Traverse SL (delivered through Shallow Rim Shape and front/rear specific layup) enables enhanced terrain hugging and bump-force absorbing control. TRACTION MONSTER Carefully engineered rim shape intentionally flexes for improved support and traction to boost confidence and control. TOUGH LIFE, LONG LIFE Engineered rim offset enables balanced spoke tension for improved fatigue life. Lifetime warranty on Roval Wheels when registered within the first 90 days of purchase. SAYONARA PINCH FLATS Optimized "Flat Top" bead profile requires 85% more force to pinch flat compared to a standard round bead, virtually eliminating "snake bites." AIR TIME Thank our genius engineer Chuck Teixeira for inventing the "Roval ThreadBed Valve"; a valve that threads directly into the rim eliminating compression nuts, air loss from rim flex, and makes tire set-up easier, and reduces sealant clogs. INTENDED USE Trail WEIGHT (29) 1,645g 240 EXP (with valve and tape) WHEEL SIZES: 29 2 Year "It Happens" No Fault Crash Replacement - If you damage your Roval product while riding within the first two years of ownership and it's not covered under warranty, we'll still replace or repair. USA Only and wheels must be registered. STRUCTURAL WEIGHT LIMIT (Rider & Cargo) - 125kg / 275lbs

World Cup speed meets trail durability World Cup Fast, Trail Tough XC speed meets trail-ready durability with the new high-value Control SL V 370. Weighing just 1,590g, these fly up climbs, they feature a tuned carbon lay-up for better traction and a stronger rear rim for impact resistance. Sapim D-Light spokes pair with the durable and fast-engaging DT Swiss Ratchet LN for 20-degree engagement. A 4mm FlatStop beadhook minimizes pinch flats, and an asymmetric rim profile boosts longevity—blending speed, control, and durability for elite performance. At a Glance: - Use: XC Racing & Down Country Ripping - Weight: 1,590g (with tape and valves) - Rim Details: Depth: 25mm, External Width: 37mm, Internal Width: 29mm, Bead Hook Width: FlatStop 4mm - Hub & Engagement:DT Swiss, Ratchet LN 18T
20 degrees Spokes: Sapim D-Light spokes - Tire Recommendation: AirTrack and Fast Track Tires Approved Tire Widths: 1.9” to 2.6” - Brake Mount: 6-bolt

If you need just one wheel to stock for on-the-spot repairs, these wheels feature both Rim Brake and Disc Brake compatibility. - Shimano hub - Center-Lock Disc and rim brake - Shimano Hub - Center-Lock Disc - Includes skewer - Tubeless Ready - Rotor Lock Ring not included

WTB's ST Light rim offers great value and performance for modern mountain bike wheels; compatible widths offer the optimal setup and performance with today's trail and enduro tires. - WTB ST rims create an affordable solution to tubeless setups for mountain biking. UST compliant bead hooks border a tape and sealant-driven inner rim profile, providing standards-based, repeated tubeless consistency - 32 spokes

Reserve 30 wheels feature a 30mm internal width that supports 2.3-2.5" tires, and the thick rim beads stand up to the abuse of tough, rocky, steep tracks ridden at elite speed. While DH rims see greater single impacts, nothing beats the full weekend of regular abuse that an EWS race dishes out. To say nothing of the infamous 'Anti-Grip' and the rocks buried within the moondust in the Andes of Chile. - Designed for DH riding and racing - Carbon fiber construction with 4mm asymmetric offset - Reinforced rim bed for impact resistance - Rated for e-bike use - Ships with rim tape installed, tubeless-ready valves, and cards identifying the builder of each of your wheels - Backed by a lifetime warranty

Let’s face it, modern downhill tracks are not for the faint of heart. From the moment you drop in, it’s a hari cari mix of boulders, roots, bumps and jumps awaiting you, and literally the only thing keeping you upright and connecting you to the ground is your wheels. It’s serious business, and the abuse of a day riding DH is no joke, but the Reserve 31 DH wheels have your back. - Designed for DH riding and racing - Carbon fiber construction with 5mm asymmetric offset - Reinforced rim bed for impact resistance - Rated for e-bike use - Ships with rim tape installed, tubeless-ready valves, and cards identifying the builder of each of your wheels - Backed by a lifetime warranty

Quality Wheels 105/A23 Front Wheel - 700, QR x 100mm, Rim Brake, Black, Clincher

Full DT Swiss equipped all mountain wheel built to complete DT's offering with the available Superboost 157mm rear option. 30mm inner rim width maximizes performance of today's trail and enduro tires. DT Swiss hub is modular for easy cleaning, serviceability and rear engagement upgrades. - Installed tubeless ready tape - 6-bolt disc hub - 30mm Inner rim width - DT 350 hub

Blending the versatility and performance of tubeless ready rims with a broad range of axle compatibility makes these wheels a great choice for service or upgrades options. Rims can accommodate tubes and clincher tires without modification. - Tubeless ready

Enduro race wheels at an unbeatable price. These wheels check all the boxes for a privateer racer or weekend warrior. Boost Center Lock SLX hubs paired to DT Swiss Enduro 30mm ID tubeless rims in 28 hole provide a winning balance of weight and strength. - 30mm inner width - Center-Lock Disc - Tubeless Ready - Rotor Lock Ring not included - 28 Hole - Professional tubeless tape installation included

Enduro World Series designs and performance paired with real world value and reliability. These wheels were built to get you on the podium or your trail PR with a modest budget. - 30mm inner width - Center-Lock Disc - Tubeless Ready - Rotor Lock Ring not included - Micro Spline - 28 Hole - Professional tubeless tape installation included

The reliable Shimano Tiagra hub paired to a DT Swiss G540 gravel rim creates the ultimate balance of value and performance. Tubeless ready and pre-taped 24mm internal rim width provides an optimal set up with gravel, adventure, and modern higher volume all-road tires. Featuring DT Swiss Competition butted spokes and DT Swiss nipples, with thru axle and Center Lock disc for compatibility with most modern road and gravel bikes. The Tiagra/G540 wheels make a great replacement for high-end bikes, or an optimal upgrade for entry level and mid-level bikes. - 24mm inner width alloy rim - Professional tubeless tape installation included - DT Swiss Competition Spokes - 28 spokes - Shimano Tiagra hub

Does the situation require more out of your equipment? Turn to Value HD for some extra beef! These wheels are built with everyday use in mind for heavy-duty applications. Featuring premium double wall rims, stainless steel spokes, and sealed hubs, the Value HD Series upgrades the Value Double Wall Series lineup with even heavier load capacity and an expanded range of fitments. - Intended for heavy-duty use - Rim brake use - Includes skewer

The Stan’s Flow S2 rim paired with the DT Swiss 350 hub creates a high-performance, durable, and reliable wheelset designed for aggressive trail, enduro, and all-mountain riding. This combination brings together the legendary impact resistance and tubeless reliability of the Flow S2 rim with the proven strength and precision of the DT Swiss 350 hub, delivering a wheelset that excels on technical descents and demanding terrain. - Built for Aggressive Riding – Whether charging through rock gardens, sending drops, or tackling steep switchbacks, this wheelset is designed to handle the toughest trails with confidence and control - Stan’s Flow S2 is built from durable 6061 aluminum, features a 30mm internal width that’s optimized for modern trail and enduro tires. Its reinforced design provides excellent impact resistance while maintaining a lightweight feel for superior ride quality. Stan’s Bead Socket Technology (BST) ensures easy tubeless setup and improved tire support for enhanced traction and control - DT Swiss 350 hub features the Ratchet System 36SL with 36 points for near-instant engagement and efficient power transfer. Sealed cartridge bearings and precision machining make this hub a go-to choice for riders who demand long-lasting performance with minimal maintenance - Thru-axle configurations to fit a wide range of modern mountain bikes, ensuring compatibility and adaptability - Built with DT Swiss Competition spokes and brass spoke nipples - Professional tubeless tape installed

Upgrading to a set of quality tubeless wheels is the number one way to improve the ride of your XC or Gravel bike. Tubeless offers more comfort and control with less rolling resistance, and when it comes to tubeless, nothing beats the easy inflation and performance of Stan's patented Bead Socket Technology. First introduced over 15 years ago, the original Crest rim design with BST helped launch the tubeless revolution. Today's Crest S2 wheels offer quick and easy inflation, the legendary airtight seal, and a 25mm width that offers incredible stability for 40mm to 2.3" Gravel and XC tires. - 25mm rim width optimized for Gravel and XC tires up to 2.3" - 6061 aluminum with sleeved joint and stainless steel rim eyelets - Patented BST low-profile rim shape for easy tubeless inflation and the most reliable seal - Matched wheelsets use traditional J-bend lacing and share a single spoke length for easy serviceability - E-sync hubs feature Enduro bearings with double-row freehub bearing and cromoly axle offer 47% increase in max torque capacity over Neo hubs - Connection program includes 3-year E-sync hub warranty, 3-year S2 rim warranty, 1-year crash replacement, and $10 donation to trail maintenance or advocacy group of your choice - Tubeless tape installed, requires additional valve stems

- Designed, tested, and raced to victories on the World Cup DH and Enduro World Series circuits - Tie beam triple-cavity rim design resists damage and prevents air loss under impacts - 29mm internal width optimized for 2.35" to 2.8" Trail, All-mountain, and DH tires - E-sync hubs Specs: - Wheel Tire Type: Tubeless Ready - Wheel-Brake Comp.: Disc IS 6-bolt - Rim Material: Aluminum - Spoke Type: Sapim D-Light - Valve: Presta - Rim Construction: Double wall

Does the situation require more out of your equipment? Turn to Value HD for some extra beef! These wheels are built with everyday use in mind for heavy-duty applications. Featuring premium double wall rims, stainless steel spokes, and sealed hubs, the Value HD Series upgrades the Value Double Wall Series lineup with even heavier load capacity and an expanded range of fitments. - Intended for heavy-duty use - Center-Lock Disc - Includes skewer

EX 1700 SPLINE wheels are built on 36t ratchet hubs combined with a super strong and welded 30 mm wide aluminum rim. The rim profile is designed to withstand the hardest use of Enduro racing while still keeping the weight low for long and demanding uphills. Laced to double butted competition straightpull spokes, the EX 1700 SPLINE wheels are built to take a beating. - Welded Aluminum rim with 30mm internal width - 350 hub with 36 point SL Ratchet system - Competition spokes and Squorx nipples - Designed for Enduro applications

The all-new M6 is ENVE’s flagship, every day, any-trail, wheel developed for all the bikes, riders, and trails between cross-country and gravity racing disciplines. Like all new M Series wheels, the M6’s rims feature unique shapes and constructions front and back. To accommodate the modern trail rider’s preference for 2.4-2.5” wide tires, the M6’s front rim features an internal rim width of 32mm, and the rear is 29mm. - The rear rim has been optimized for power transmission, tracking, and durability - Wide Hookless Bead - Trail optimized anti-pinch flat protection - Innerdrive 80pt engagement hubs with CX Ray straight pull spokes - Brass external nipples with Nyloc threaded locking insert - Built for Cross-Country, Down-Country, Trail Applications - Approved for E-bike usage - Up to 75nm - Backed by ENVE’s 5-year Factory Warranty and Incidental Damage Protection