Thomson's Elite Seatpost is perhaps one of the most recognizable bicycle components in the world and it has earned its reputation as a super-strong, light and reliable beauty. With roots in the aerospace industry, Thomson builds the post with a tough and light 7000-series aluminum body, an elliptical extrusion that adds strength and stiffness, and a head and seat clamp forged and machined from a block of aluminum to eliminate any possible weak areas. Plus, its simple-to-use 2-bolt seat clamp allows speedy, infinite and secure seat angle adjustment from minus 5 degrees to plus 29 degrees. Upgrade your favorite ride to a Thomson seatpost and start riding in style.
Dimension Suspension Seatpost - Clamp Style: Std Rails - Diameter: 27.2mm - Length: 350mm - Material: Aluminum - Max Height: 255mm - Min Height: 130mm - Offset (mm): 0mm - Seatpost Type: Suspension - Travel (mm): 35mm - Weight: 450g
Sleek design and ultimate functionality of the WCS 1-Bolt seatpost are the hallmarks of Ritchey design. Single bolt-actuated side load clamp offers easy adjustability and simple security in a post that works as nicely as it looks. - 3D Forged 7050 Alloy - Available in 27.2, 30.9 and 31.6mm diameters - Available in 350 and 400mm lengths - 20mm Offset - 7x7mm saddle rail clamp included - Interchangeable clamps available for carbon rail saddles - Saddle Clamp Torque Spec: 12Nm - Finish: Blatte - 195g (27.2/350)
The Salsa Guide Deluxe Seatpost is premium aluminum: lightweight, strong, and drama-free. Count on it to be there when you need it. - 2014 Aluminum shaft - Two-bolt head
The latest generation Thudbuster ST is superior to its predecessor in every way. Building on Thudbuster's proven parallel linkage technology we have completely re-designed the seatpost for increased durability, a higher rider weight limit, and additional suspension travel, as well as ease of use through tool-free elastomer change and a single-bolt seat clamp design. By improving on this already legendary design, we're confident to say that the newest generation Thudbuster is the most advanced suspension seatpost ever made. - Travel: 50mm - Weight: 580g - Max Rider Weight: 330lbs
With shaft and head formed from one continuous carbon fiber section, the K-Force Light SB0 seatpost is both light and strong. The K-Force Light SB0 features a zero-offset (in-line) clamp for a forward saddle position, with our forged alloy Minimal Top Clamp holding the saddle securely. - Forged alloy Minimal Top Clamp (MTC) - Increased setback for correct fit and saddle support - One-piece continuous carbon fiber construction - M5 chromoly and stainless steel hardware design - Zero Setback - Fits 7mm standard rails and 7x9mm oval rails - 185 grams
The proven Transfer seatpost gets lighter and tighter. Completely redesigned from the ground up, with improved serviceability, decreased weight, reduced length, and decreased insertion depth. Performance Elite Transfer Posts retain the same internals, diameter options, drop options, shortened stack heights, new patent-pending head design and proven internals as the Factory Series but have a black anodized upper. - Cable actuated with tool-free quick disconnect for easier installation and removal - Low lever force provides consistent actuation pressure even with saddle weighted or unweighted - Easy to modulate return speed with lever - Remote lever sold separately - 0mm offset
Saddle Up Based on the latest FOX Transfer platform with its proven performance, the new Turbine R Dropper Post features a slick seat clamp design for reduced stack height and a 25g weight savings from the previous version. This post will treat you right. Less is More New, patent-pending FOX seat clamp design dramatically reduces stack height, allowing you to fit more travel into a shorter space. Full Coverage Proven FOX-designed internals provide infinite height adjustment, but perhaps more importantly—even easier serviceability. No-Sweat Installation Mounting a saddle and getting your saddle position dialed is easy thanks to the user-friendly seatpost clamp. Brilliantly Uncomplicated Uses standard shifter cable and housing. You know, just to keep things real. Oh yeah—it's also 25g lighter than the previous version. - Compatible with Matchmaker - Includes post only - Mechanical lever actuation - Head Type: Zero Offset—2 Bolt - Weight: 520g
The name says it all: Thomson's Masterpiece Seatpost combines the best materials, exceptional strength, perfect function, light weight and the classic beauty of all Thomson products. All Masterpiece posts are extruded and then painstakingly machined from a single block of ultra-strong 7000-series aluminum, and they all weigh less than 200 grams complete. This means you get a post tough enough for any ride on or off road and at a nice and light weight that will complement your dream bike. What's more, you get Thomson's easy-to-adjust and super reliable 2-bolt seat clamp that makes it a breeze to dial in your perfect seat position from minus 5 degrees to plus 29 degrees.
Thomson's Elite Setback Seatpost is perhaps one of the most recognizable bicycle components in the world and it has earned its reputation as a super-strong, light and reliable beauty. With roots in the aerospace industry, Thomson builds the post with a tough and light 7000-series aluminum body, an elliptical extrusion that adds strength and stiffness, and a head and seat clamp forged and machined from a block of aluminum to eliminate any possible weak areas. Plus, its simple-to-use 2-bolt seat clamp allows speedy, infinite and secure seat angle adjustment from minus 5 degrees to plus 29 degrees. Upgrade your favorite ride to a Thomson seatpost and start riding in style.
- 3D forged from 2014 heat-treated aluminum for optimal strength to weight ratio - Race Face's triple butting design maintains strength in critical areas while reducing overall weight - The tube is anodized & shot peened for increased fatigue life - Updated Hunter head design for easy saddle installation and full adjustability - 3D forged from 2014 heat treated aluminum with triple butted mast - Thumbscrew tightening system allows quick dial-in of the saddle angle by hand - Angled clamp bolts allow easy tool access for hassle free adjustment - Rubber grommet seals the post to prevent water from entering seat tube - Accepts 7/8mm CrMo/alloy and 7/9mm carbon rails. 260g (30.9mm)
The new Reverb AXS XPLR dropper post delivers more control, confidence, and fun on gravel roads everywhere. Getting the saddle out of the way means more room to move, saving you from awkward maneuvering and sketchy descents. We created an all-new design complete with lightweight air-only internals featuring built-in compliance we call ActiveRide. It's like travel for your saddle. Enabled by SRAM AXS technology, Reverb AXS XPLR is part of the ultimate personalized cockpit. - New 27.2mm Reverb AXS XPLR delivers more control, confidence, and fun for gravel - ActiveRide—Air only internals provide a fully rigid top-out position. With the touch of your AXS controller, you've got built-in compliance to ensure comfort and control over the roughest sections of gravel - Two travel options to choose—50mm or 75mm - Saddle clamp options compatible with 7x10 oval carbon rails. - Seat post length includes 400mm and 350mm (50mm drop only) - AXS Technology allows rider customization via the AXS Mobile App - AXS handlebar controls (drop or flat bar) - Shared battery with all other SRAM AXS enabled components - System is completely waterproof and dustproof to IP69K—take it anywhere - SRAM AXS battery and charger included SPECIFICATIONS: - TRAVEL: 50mm, 75mm - POST DIAMETER: 27.2mm - POST LENGTH: 350mm, 400mm - REMOTE: AXS Controller Sold Separately - SADDLE RAIL COMPATIBILITY: Round/Oval (7x9 & 7x10), Round/Oval (7x9) - WEIGHT (G): 562 - WEIGHT BASED ON: 75mm Travel 400mm Length W/O battery - Battery 25g
Performance suspension seatposts designed to add comfort and compliance to any bike without adding unnecessary weight. With 35mm of travel, the eeSilk+ is a suspension seatpost designed to noticeably soften any gravel or mixed-surface road. These posts make great enhancements to gravel or mixed surface bikes by reducing the chatter transmitted from the surface to the rider and can be tuned to rider weight through a simple elastomer change. #5 elastomer comes pre-installed, other weight elastomers sold separately - Travel: 35mm - Length: 387mm - Weight: 373g (27.2mm); 378g (31.6mm) - Max Rider Weight: 250lbs - Offset: 12mm - Minimum Extension: 80mm - Maximum Extension: 287mm
The X-Fusion Manic post uses internal cable routing and was designed around a low-profile seat cradle and seal collar to fit a broad range of frames. The mechanism is air-sprung and hydraulically locked. The remote can be run on the left or right, above or below the handlebar, but is optimized as a left shifter replacement for 1x drivetrains. - Cable activated, hydraulic action, infinitely adjustable travel - Double key-way design prevents lateral twisting - Double bolt clamp with a wide range of seat angle adjustment. Fits both standard and 7 x 9 mm Carbon Rails - Sealed cartridge internals for quick replacement - Low profile head-seal and saddle clamp increase useable travel
Comp Carbon Zero Setpost
- Longer Drop – The Tellis is now available in 200mm drop so riders can benefit from the ability to further drop their saddle. This allows for more free movement on the bike when the trails get steep, fast or technical - The same proven & trusted design, now in a longer 200mm drop length - Internal Routed, Infinitely Adjustable Design - Simplistic—Fully Sealed Alloy Cage / Stainless Tip Cartridge System - Durable 3D Forged Head—With 7075-T6 Forged Clamp - Intelligent Keyway System—Ensures Minimal Play - Easiest Installation—Cable Head Attaches At Base - Cold Weather Approved—Tested Down To -20C - Featherlight Lever Thumb Actuation—Industry Leading - 282mm insertion length - 1x Lever included—With Premium Jagwire Lex Slick Housing, Stainless Cable and Hardware
- Built on the revered FOX Transfer platform, the Turbine R Dropper Post has infinite height adjustment with up to 175mm of drop Specs: - Seat Post Diameter: 30.9mm - Travel: 200mm - Cable Routing: Internal
Ride longer, ride farther with the eeSilk premium suspension seatpost. The eeSilk is comparable in weight to traditional rigid performance seatposts while offering 20mm of vertical compliance improving control on rough surfaces and reducing fatigue on long rides. These posts make great enhancements to endurance road bikes by reducing the chatter transmitted from the surface to the rider and can be tuned to rider weight through a simple elastomer change. #5 elastomer comes pre-installed, other weight elastomers sold separately. - Travel: 20mm - Length: 375mm - Weight: 345g (eeSilk 27.2) - Max Rider Weight: 250 lbs. - Offset: 8mm
- Designed using SRAM Exogram technology - Available the Zipp SL Speed DI2 Internal Battery Mount to hold a Shimano DI2 seatpost battery within the SL Speed seatpost. (Sold separately) - Matte Black finish
Thomson Covert Elite Dropper Seatpost-31.6 150mm Black Internal. We've set the bar with the Thomson covert black dropper post. It's designed around internal routing for clean installation and an updated shift style remote lever for effortless operation. The Thomson Covert Dropper includes a new shifter oriented remote lever for easy operation. The cartridge-based system is designed to have the longest service life in the industry. If repair is needed, it's fast, affordable, and simple. Every part that makes up the Covert dropper is carefully chosen, and of the highest grade quality available. - Custom made Norglide bearing bushings and Trelleborg O-Rings and seals - Thomson saddle clamps and fasteners - Motul Oil for durability and precision quality. - The return speed is damped in the last 15mm of upward travel to be gentle on your seating area. - 60mm (Ø27.2 only), 100mm, 125mm, 150mm of infinite travel. - Passes ISO 4210 fatigue and strength tests for seat posts.
The Salsa Guide Seatpost is designed to blend into the background; just like a good seatpost should. Strong, reliable, and always just where you left it. - 6061 Aluminum shaft - Two-bolt head
The Salsa Guide Carbon Seatpost is lightweight, durable, and supportive when you need it most. - Carbon shaft - Bonded Aluminum two-bolt head
- Aerodynamic FACT carbon construction that’s compatible with the 2019 Venge - Sleek Di2 integration hides the Di2 junction box inside - Cylindrical aluminum head assembly adjusts fore/aft and tilt with a single bolt
ENVE's proven twin-bolt seatpost design refined for the modern road bike with seatpost battery integration capabilities. - Material: Carbon Fiber - Hardware Material: Titanium - Saddle Angle Adjustment: 0 – 27 degrees - Saddle Rail Compatibility: 7x10mm Carbon Rails / 7mm Round Alloy Rails - Torque Spec, Saddle Rail Clamp Bolts: 5.5Nm - Torque Spec, Seatpost Collar: Determined by your Frame manufacturer/Seatpost Collar - Weight: 210g (25.4mm), 204g (27.2mm), 204g (30.9mm), 204g (31.6mm)
The all-new Highline delivers infinite adjustment, smooth feel, and easy installation for any bike. Details - Shorter insertion length to fit more bikes - Premium Trelleborg sealing - Exclusive Igus LL-glide bearings and keys - Jagwire cable and housing - Self-contained IFP hydraulic cartridge - Internal routing - Quick connect mechanism for ease of cable installation - Linear actuator for quick return speed - 2-bolt quick-connect head - Remote sold separately
The Highline 3 delivers infinite adjustment, smooth feel, and easy installation. Details - Premium Trelleborg sealing - Exclusive Igus LL-glide bearings and keys - Jagwire cable and housing - Self-contained hydraulic cartridge delivers industry-leading quality and reliability - Internal routing - Quick connect mechanism for ease of cable installation - Linear actuator for quick return speed - 2-bolt standard head - Remote sold separately
WeThePeople's Team Pivotal seatpost is made from 6061 aluminum for a perfect blend of strength and weight savings. It works with all Pivotal seats and it's 200mm long for plenty of adjustability.
$205.00 - $211.00
We designed the Tall & Handsome with strength and elegance in mind, but also to be super easy to setup and adjust. Like all PAUL components, it’s built to the highest standards for tolerance, function, reliability, and ease of use. Machined by us here in sunny Chico, California. - Nice looking seatpost is built to the highest standards for function and ease of use - Head and shaft are made from a special high strength 2024 aluminum alloy - Two bolt head offers roughly 15 degrees of tilt adjustment - 26mm clamp setback. 320g - Made in the USA
Dimension Alloy seatpost. - 1-piece forged AL-2014 - Clamp Style: Standard Rails - Material: Aluminum - Max Height: 245mm - Min Height: 35mm - Weight: 250g
$18.99 - $19.99
Kalloy's 602 seatpost comes in a wide variety of diameters to fit most frames. Simple, sturdy, and lightweight, the 602 makes a great replacement seatpost.
Page 1 of 3 Next page