Parts & Accessories
$21.95
B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes.
- Single bottle mount with two slotted holes for adjustments up to 4mm +/- 10mm
- Designed to maximize bottle capacity on small frame bikes and dual suspension frames
$24.95
B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes.
- Three slots for additional adjustments over the B-RAD 2 base
- Compatible with triple bottle mounts on forks or frames, use neoprene pad and zip tie for use with standard bottle cage mounts
$24.95
B-RAD Half Bottle Mounts allow for cargo customization and cargo optimization. Designed to work in tandem with B-RAD Base, the Half-Bottle Adaptor moves the bottle over about half a bottle radius to make it easier to access. The Accessory strap mounts can be mounted to the other side providing a mounting point for additional items.
- Mounts to the B-Rad base mount (not included
$27.95
B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes.
- Long, four-slotted mount allows two, smaller bottles to be mounted in-line
- Compatible with triple bottle mounts on forks or frames, use included neoprene pad and zip tie for use with standard bottle cage mounts
$29.95
The B-RAD Accessory Strap Mount is designed to add an additional strap point for tire levers, tubes or CO2 cartridges. Mounts to bottle bosses, or to the B-RAD base for additional carrying options.
- Mounts to bottle bosses, or to the B-Rad base for additional carrying options
- Main strap is 50mm wide and holds loads 75-120mm diameter (3 - 4.75 inches)
- Cradle strap is 40mm wide and 350mm long for supporting loads
$29.95
B-RAD Bottle Mounts allow for cargo customization and cargo optimization. They are designed to work in tandem with B-RAD Base mounts to keep cargo on the bike and off the back.
- Compatible with any bike frame that has 2 standard 64mm spacing bottle cage mounts (most modern frames)
- 6061-T6 aluminum brackets, stainless hardware
- Weight (no hardware) – 20g
- Maximum load 1700g
- Designed to carry two bottles or accessories off of one B-RAD base
$6.00
Replacement hardware, bolts and nuts for Wald baskets.
Works with Wald Basket models: 520, 520GB, 535 and 535GB
$9.20
By using the accessory bolt mounts on a frame or fork, the Wald Standoff kit allows the user to space a basket or rack away from other components that would otherwise be in the way, like disc brake calipers.
- 2 Phillips head frame bolts in 1.5-inch (38mm) length
- 2 Standoff spacers in 1-inch (25.4mm) length
$12.00 - $15.00
Common on European utility bikes, a front wheel stabilizer makes loading front racks simpler. It is a spring connecting the fork to the down tube. It adds a subtle self centering action to the front wheel, making loading and unloading of a bike with a basket, or say, our Porteur Rack much easier. The spring also offers some resistance to steering, so it counteracts deflections from hitting potholes and road debris.
- Mounts to the back of the fork crown via brake bolt or through bolt
- Fork crown mount diameter is made to fit an M6 bolt - common on nutted calipers
- Use Sheldon's Fender Nuts to work with recessed brake bolts
- Rust resistant and includes all required brackets and hardware
- Available for Small (31.8mm and smaller) and Large (38-62mm) sized downtubes
$7.95
Topeak's Cargo Net works with the Trolley Tote or MTX Rear Basket (sold separately). Make sure your goods stay in place on those bumpy rides home!
$7.95
QuickClick mount for racing type saddles. Works with all Topeak Wedge Bags.
- Material : Injected Nylon
- Weight: 30g / 1.06 oz
$11.95
For BabySeat II Racks and MTX Tubular Racks (34.5 cm in length for small bike frames).
- If you have a small frame bike and cannot install Topeak rack or BabySeat in recommended position (2 or 3 degrees from horizontal), please use the 34.5cm extra long mounting bracket arm for proper installation.
$22.95
Fast and easy attachment of Topeak handlebar bags.
- Clamp: Fits 25.4/28.6/31.8 mm Handlebars (shims included)
$24.95
Solid aluminum dropper post mount to attach rear bikepacking bag, larger saddle bag, bottle cage, tail light, and more.
$26.95
Topeak's front basket handlebar fixer fits standard bikes or eBikes with display units.
- Fits up to 1-inch handlebars
$37.95
Take your bike adventures even further with a versatile mount cage to pack larger gear on your bike. The included tie-down straps provide the ability to carry a DryBag, sleeping bag/pad, stuff sack, or any round shaped gear on your bike frame or fork with bottle bosses. A four-hole mount design offers height adjustment of your load for better balance. VersaMount clamps also provide easy installation and flexible mounting options.
- Fits tubes 20-60mm.
- Engineering grade polymer
- 64 mm mounting height adjustable
- Weight: 128g
- Max load: 3kg / 6.61lb
- Dimensions: 22 x 12 x 7cm / 8.7 x 4.7 x 2.8-inches
$44.95
The Topeak Backloader Wishbone attaches to the saddle, and provides anti-sway for large saddle bags. In addition, the Wishbone has bottle cage mounts to allow 2 additional bottles to be carried.
A handy accessory to add to your bikepacking repertoire that keeps the backloader or any large seat bag from swaying back and forth.
- Fits rear bags 18cm/7" wide
- Bottle cage bolts included, max load 4.4lbs
- Mounts to any standard seat rails. Not compatible with monorail or spring/bumper saddles
$19.95
Thule's Pack n' Pedal Side Frames mount quickly and easily to the sides of their Pack 'n Pedal Tour Rack (sold separately). They allow you to use any model of pannier for increased luggage capacity and a lower center of gravity.
$49.95
Allows Thule Yepp Maxi to be installed on a bike with a rear rack with a load capacity of at least 35 kg/78 lbs and the ability to carry seat and bike bags.
Features:
- Fits rear racks measuring 11-17cm/4.5-6.7"
- For use on rear racks with a load capacity of at least 35kg/78lbs
$12.00
Designed to secure our Every Day Caddy to your saddle, the 15" Swift Strap is a durable nylon buckle strap. Keep one or two extra in your tool kit for last minute repairs or to lash modular gear to your setup.
Dimensions:
- Measurements: 15" long x 3/4"
- Weight: 0.8 oz
Materials:
- Nylon buckle
- Polyurethane
$15.00
The Bungee Booster is a quick and easy way to add some extra capacity (as well as some color) to any of our bags with parallel webbing daisy chains. Just lace the durable elastic cord through the loops of the daisy chain and slip the cord lock on for adjustability. Cut to length to fit whatever bag you choose.
$15.00
Keep your gear secure and the stoke high with these slip-resistant, super-bomber polyurethane 9" Swift Straps. Not only are they perfect for lashing your Swift bags to your handlebars, saddle, or top tube, but also work as an on-the-go attachment straps for layers you shed or goodies you pick up along the way. With the Swift Strap Set you’ll never think twice about your bags or accessories going OTB, even on the roughest of terrain.
Dimensions:
- Measurements: 9" long x 1/2"
- Weight: 0.3 oz
Materials:
- Nylon buckle
- Polyurethane
$5.00
Spruce-up a well-loved Dummy bag with replacement parts from Surly.
$5.00
Spruce-up a well-loved Dummy bag with replacement parts from Surly.
$5.00
Spruce-up a well-loved Dummy bag with replacement parts from Surly.
$5.50
Spruce-up a well-loved Dummy bag with replacement parts from Surly.
$10.00
The Loop Junk Strap is the same 120cm woven nylon strap with a stainless steel buckle that Surly's regular junk strap is. The Loop Style Junk Strap, however, has a loop sewn at each end of the strap so you can wrap them around small diameter tubing like that used for racks and handlebars. They secure in the middle with the stainless steel buckle. Surly made these Loop Style Junk Straps because it offers another method for those wanting to secure cargo to their racks and or bikes. Junk Straps of any kind are useful in many different situations so toss a few in your backpack and always be ready to tie something to anything else.
- For general tie down use
- 42" loop strap, plus 8" closure buckle strap
$11.00
Extend the life of your Dummy bags with this replaceable wear patch.
Page 1 of 3
Next page