Cables

Extend housing runs using these double-ended junction end caps.

Jagwire's M7 Adjusting Barrel is a 7 x 1.0mm-threaded replacement cable-adjusting barrel. It's the right part for many older-style mountain bike brake levers. It comes in two models and is made of durable metal with a lockring for locking your adjustments. You get a pack of 10.

- Left and right shifter compatible - Road and MTB compatible - 1.1mm polished stainless steel cable

Jagwire Mini Combo Boxes contain needles and compression bushings for many common hydraulic disc brakes. - Includes a variety of common fittings for a range of disc brakes from SRAM, Avid, and Shimano

The M2 lever works with a single cable or Odyssey's dual cable system. - Improved braking power for Gyro users - Left/Right hand compatible

Includes - 1.5mm coated cables (1 x 850mm, 1 x 1750mm) - 5mm Kevlar-reinforced compression-free housing - Ferrules, end caps, frame protectors

The Odyssey K-Shield Linear cable features a pre-stretched inner Slic Kable covered in a linear casing to prevent binding and an outer K-Shield mesh housing for less weight over a standard steel mesh housing (2.9 oz). - Black - 60 – 65mm

SRAM's Inline Barrel Adjusters are placed on your brake cables near the handlebars so that you can turn the adjusters to fine-tune your braking. They feature durable and light aluminum/composite construction with rubber covers for easy operation.

Inline adjusters make on-the-fly derailleur cable tension adjustments safe and easy. - Indexed adjustment for braided shift housing - Not recommended for use with brake systems - Size: 4.5mm

Rocket II direct cable adjusters fit into Shimano STI shifters with external shift cable routing. - Rubber coated adjusting knobs for firm grip - Adjustable on the fly - 4mm

Inline adjusters make on-the-fly derailleur cable tension adjustments safe and easy. - 5mm - Stronger detent mechanism for use with brake housing - Perfect for mechanical disc brakes

Protection where it's needed; Tube Tops can be placed virtually anywhere cable housing comes into contact with a bicycle frame. Designed to protect a frames finish Tube Tops can also be used to quiet cable slap.

Jagwire's EZ Handle Single End Straddle Wire is a replacement straddle wire (also called a crossover or transverse cable) for cantilever brakes.

Jagwire's Sport Inline Adjusters are installed on your shift cable housing sections so that you can fine-tune the shift cable tension by hand (without tools). They're great for keeping your shifting dialed in. They're precision made of lightweight aluminum and nylon for easy use and durability. To install them, remove the cables and housing sections, cut the top housing sections in two and rejoin the sections with the Inline Adjusters in the middle.

Odyssey took their proven Linear Slic Kable housing and replaced the steel linear wire with aluminum. Utilizing the aluminum wire in the housing saves you significant weight, roughly 30%. This cable also features their specially designed “volcano” ferrules that they’ve used since 2008 to prevent housing blowouts. This Kable also comes with color-coaded inner wires and ball ends to differentiate between their regular Linear’s Race Linear Slic Kable. - Length: 60 – 65mm - Black

Jagwire's flexible shift housing is used for the rear housing segment with Shimano Shadow-type road rear derailleurs to give optimum shifting performance and the flexibility needed for wheel installation and removal. - For use with Shimano Shadow type road rear derailleurs, such as RD-R9100, RD-R8000, and RD-R7000. - 4mm low-compression CGX-SL housing construction. - Includes 10x sealed end caps and 10x 4mm/4mm housing connectors

- For either front or rear shifter - Road & MTB compatible - 1.1 polished stainless steel cable

- Hydraulic Disc Brake Hose Fitting Kit - Includes 50 threaded hosebarbs, 50 red comp fittings, 1 T8 Torx - Compatible with Stealthamajig and standard levers

- Sold in pairs - Allen wrench included

K2 Hydraulic Hose Kit for Dominion Prime Stroker and El Camino Hayes proprietary hose kit is reinforced with Kevlar for strength and durability. Kit includes: 200cm rear hose and all fittings.

Basics brake cables provide value on a budget. - Double ended for compatibility with SRAM/Shimano road and mountain brakes - Pre-stretched - Cable Head: Shimano/SRAM Road, Shimano/SRAM Mountain - Color: Silver - Diameter: 1.6mm - Length: 2795mm

Designed for legacy Shimano STI shifting systems, the Ritchey Cable Barrel Adjuster allows you to dial in your shifting with ease and precision. - Cable Tension Barrel Adjusters - STI compatible - Adjust the cable tension for optimal STI shifting

Jagwire Elite Link End Cap Packs include each of the specialty housing end caps found in the corresponding Jagwire Elite Link DIY kit. - Includes specialty end caps for the 2x Elite Link Shift Kit

- Replacement cable for the Jagwire Pro Dropper kit - 0.8mm inner cable is more flexible and has lower friction than typical shift inner cables - An easy way to reduce the force required to activate a dropper post remote lever - Perfect for dropper seatposts with "stealth" cable routing and tight housing bends - Includes 2x heat-shrink shims - For use with dropper seatposts ONLY - Length: 2000mm

- Front or rear brake - MTB specific - 1.5mm stainless cable

SRAM's Guide Hydraulic Line Kit is a replacement hose kit for all Guide brakes. - Compatible with SRAM Guide R, RS, RSC, and DB5 brakes - Length: 2000mm

Fittings for converting open loop housing holders on a frame to traditional cable stops. - Fits snugly inside open loop and receives 5mm housing with no end cap - Small flange for smaller hydraulic loops - 50-pack

- 5mm derailleur housing

Jagwire Elite Link End Cap Packs include each of the specialty housing end caps found in the corresponding Jagwire Elite Link DIY kit. - Includes specialty end caps for the Road Elite Link Brake Kit

Hose fittings for Hayes hydraulic disc brakes available a la carte. Hayes brake compatibility: - HFX-9 - Prime - Sole - El Camino - Radar

Jagwire's 5mm Anchor Bolt fits certain models and types of brakes and is used to secure the cable in place after adjusting it. It is made of plated metal for strength and durability. You get a pack of 25.

SRAM's Inline Barrel Adjusters are placed on your shift cables near the handlebars so that you can turn the adjusters to fine-tune your shifting. They feature durable and light aluminum/composite construction with rubber covers for easy operation.

Jagwire's Stick-On Cable Guides are made of lightweight aluminum with adhesive on the bottom. The aluminum lets them conform to any shaped frame tube and the adhesive holds fast. They come with Jagwire's C-Clips, nylon cable clips that snap onto the guides to hold the cables neatly in place. You get a pack of 4.

SRAM's Line/Housing Frame Protectors are rubber covers that simply press onto your cable housings and or hydraulic lines to prevent the housings from hitting the frame and rattling or damaging the finish. There are 4 protectors in each package.

This aluminum link housing is the ultimate combination of durability and attention grabbing looks. It's designed to enhance your performance and appearance. So, why is it better than traditional housing? It's compressionless, which means better braking performance with enhanced modulation. But its flexibility allows for tight bends without kinking. It's also much lighter than traditional coiled steel housing while being more durable. Combine these benefits with Jagwire's Elite, ultra-slick polished cables and Slick-Lube liners that dramatically reduce friction and you've got the best of performance and style. - Compressionless link housing gives crisp brake lever feel with extreme flexibility - Each kit comes with links pre-installed on housing segments making setup quick and simple - 50% lighter than traditional coiled steel brake housings; 30% lighter than Kevlar brake housings - Durable, ultra-slick polished inner cables minimize system friction - Aluminum housing won't kink or rust. - 20th Anniversary Limited Edition Black kit (RCK705) has black link segments; the kit includes 6 additional accent links of each color including gold, silver, red, and blue

- Wire hook for electronic shift and brake housing - 2.5mm E-Shift + 5.0mm Brake

This is Odyssey's top-of-the-line brake cable that ties together all of their most advanced braking technology. - Utilizes the original BMX Linear Slic Kable housing to prevent binding when the bars are rotated. - Factory installed ferrule ends with inner volcano shape to prevent housing blow out; a Linear Slic Kable standard since 2008. - Specially coated inner wire for ultra low friction, a proven feature resurrected from their once famous Brakeline cables. - Gyro lug included at one end of the inner wire for use with detanglers. - 60-65mm in length. - Black

Aluminum, Lightweight, Lubricated An alternative to traditional compressionless housing, this system is made of nesting alloy pieces that protect the liner. Although this housing is typically more expensive, it has several advantages including increased flexibility, reduced weight and increased durability. Both shift and brake housings use identical Slick-Lube liners and interconnecting alloy pieces. - Slick-Lube liners reduce friction and protect against corrosion - Includes four 1600mm liners

Jagwire's Alloy Straddle Cable Carrier w/Liner is a nice upgrade for your cantilever brakes. It's made of light and durable aluminum and has a liner for smooth action.

Hydraulic hose with banjo fitting for TRP brakes.